Omron E32-L25T Manual de usuario

E32-L25T

A-365E32-L25T

Fluid level sensor (fiber pipe type)

E32-L25T

For installation of thin pipe (thick-

ness of 10 mm) that can be used

even in combustible atmospheres

●Easy post-installation on unit or pipe using band.

●Affordable pricing makes a big contribution to cost

reduction when upgrading equipment.

●Thin pipe of thickness = 10 mm. Contact mounting is

possible to enable detection of level differences to a

minimum of 4 mm.

●Can also be used in combustible atmospheres.*

* Plastic is used in the lens, unit case, and fiber coating. Avoid contact

with solvents as these will cause corrosion and deterioration (cloud-

ing).

Ordering Information

Rating/performance

Fiber Units

Sensor type Shape Model

Reflective model E32-L25T

Applicable amplifier unit

Model

E3X-DA-N

E3X-NA

Sensing method Reflective model

Item Model E32-L25T

Clamping pipe

(outer diameter) Transparent pipe, 8 mm to 10 mm dia. (6 mm to 8 mm inner diameter)*1

Applicable pipe material Transparent pipe (FEP or with equivalent transparency)

Sensing object Fluid *2

Repetition precision 1 mm max.

Ambient temperature Operating/storage: -40 to +70°C (no ice formation or condensation)

Ambient humidity Operating: 35% to 85% RH, Storage: 35% to 95% RH (with no icing or condensation)

Permissible bending

radius 10 mm min.

Material Sensors Polycarbonate

Fiber Plastic (polyethylene coating)

Protective structure IEC 60529 IP50

Weight (Packed state) Approx. 10 g

Accessories Band, anti-reflection sheet, fiber cutter

*1. The E32-L25T6 for a 6 mm dia. transparent pipe is also available. The model type is E32-L25T6.

*2. When using an opaque fluid, test detection with the unit before using.

A-366 Advanced Photoelectric Sensors

Principle of operation

Precautions

Dimensions (Unit: mm)

PipePipe

Emitter

Receiver

Emitter

Receiver

Fluid

If there is detection fluid, set so that

dark state is effective.

No fluid

If no detection fluid, light state.

Installation

• If only the Fiber Unit is installed, proceed according to the fol-

lowing basic procedure.

• Detection of level differences to a minimum of 4 mm is pos-

sible with the following installations.

• Do not expose the fiber unit to undo forces such as pulling

or compression (no more than 0.1 Nm).

• The bending radius of the fiber unit should be no less than the

allowed bending radius (both rated and performance).

• When securing with the band, take care that the fiber is not de-

formed.

• If an opaque pipe is used, this may result into incorrect opera-

tion.

• Water drops, air bubbles, or clouding in the pipe may cause in-

correct operation.

• If the background exerts an effect, use the anti-reflection

sheet (accessory) (see the diagram below). The anti-reflec-

tion sheet also serves to prevent shifting due to fiber unit vi-

bration.

Miscellaneous

Polycarbonate is used in the case. Do not allow contact with

chemicals such as alkalis, aromatic hydrocarbon, or chloro-al-

iphatic hydrocarbon, as these will dissolve the case.

Correct Use

E32-L25T

Binding band

Pipe

4mm

E32-L25T

Binding band

Binding band Pipe Binding band

Antireflection sheet

Pipe

E32-L25T

Sensing head (PC)

Mounting holes

15.2

(13)

1.2

2.8

18 2,000

Two, fiber attachment E39-F9

Optical fiber two, 1 dia.

7.63

40˚

Lens Two, 3.2 dia. (PC)

Optical axis

E32

In the interest of product improvement, specifications are subject to change without notice.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Cat. No. E03E-EN-01

Otros manuales de Accesorios de Omron

Omron

Omron B5WC Manual de usuario

Omron

Omron ZG2-WDC11 Manual de usuario

Omron

Omron SYSMAC C200H-IDS01-V1 Manual de usuario

Omron

Omron E2EL Manual de usuario

Omron

Omron FZ2-30 10 Series Manual de usuario

Omron

Omron ZG2 Series Cómo utilizar

Omron

Omron ZX-GT - Manual de usuario

Omron

Omron Z4LB V2 Manual de usuario

Omron

Omron ZFX - SHORT V1.0 Manual de usuario

Omron

Omron E2Q2 Manual de usuario

Omron

Omron ZFX-SC150 Manual de usuario

Omron

Omron F10 Manual de usuario

Omron

Omron ZFX-C Manual de instalación

Omron

Omron E2K-L Manual de usuario

Omron

Omron F160 Vision Sensor Manual de usuario

Omron

Omron E2S Manual de usuario

Omron

Omron ZN-A Series Guía del usuario

Omron

Omron ZFV-C Manual de instalación

Omron

Omron B5WC Manual de usuario

Omron

Omron F3EM2-005 Series Manual de usuario

Omron

Omron E3ZS-T81A Manual de usuario

Omron

Omron Photomicrosensor (Transmissive) EE-SX1107 Manual de usuario

Omron

Omron E3X-DA11TW Manual de usuario

Omron

Omron ZFV-SC50 Series Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario