Omnitron Systems Technology IConverter 2GXM2 Manual de usuario

The iConverter®2GXM2 conforms to the Ethernet in the First

Mile(EFM)fiberstandardstosupportFiber-to-the-XMetropolitan

andEnterprise LAN networks. The2GXM2 provides intelligent,

securelymanagedservicedemarcationatthecustomerpremises,

offeringQualityofServiceandenhancedBandwidthControl(rate-

limiting) capabilities. The 2GXM2 features built-in Operations,

Administration and Maintenance (OAM) with comprehensive

performancemonitoring,fault detection andprovisioning.

The 2GXM2 is available as a compact standalone unit or as a

chassis plug-in module. The hot-swappable 2GXM2 plug-in

module can be mounted in a 19 or 5-Module chassis with any

combination of redundant AC and DC power supplies. It can

also be mounted in a 2-ModuleAC or DC powered chassis, or

in a 1-Module chassis withAC or DC power input.

The plug-in module can manage other modules in the same

chassisandoperateasamanagedgigabitfiber-to-fiberconverter.

Itfeatures two GigabitEthernet backplane portsfor connectivity

toadjacent modules inachassis formulti-portand multi-service

configurations.

Thestandalone 2GXM2 isavailable asatabletop orwall-mount

unit. The tabletop model can be DIN-rail mounted using an

optional DIN-rail mounting kit. Both the tabletop and the

wall-mount models are DC powered and are available with an

externalAC/DC power adapter or a terminal connector for DC

power. The 2GXM2 standalone unit combines management

capability with a compact chassis for deployment at the

demarcationpoint.

1000BASE-X SFP to1000BASE-XSFP MediaConverterand NetworkInterfaceDevice

iConverter®2GXM2

Carrier-Gradeoptical Ethernet NetworkInterface Device

IntegratedSNMPv1, SNMPv2c,SNMPv3and IP-less

802.3ahmanagement

802.3ah Link OAM for early fault detection and

performancemonitoring

VLANwith 802.1adQ-in-Q forE-Line andE-LAN services

Qualityof Servicefor Voice/Data/Video overEthernet

Bandwidthcontrol (rate limiting)with 64Kbincrements

Port MIB statistics and optical performance statistics to

supportServiceLevelAgreements

PortAccess Control for enhanced security

10,240byte Jumboframes

Layer2 Control Protocol(L2CP) Policy Control

ConfigurableLink FaultPropagation modes

SmallForm Pluggable (SFP)transceivers withOptical

Statistics for standard or CWDM applications

Auto-negotiationof duplex modes and pausecapabilities

Commercial(0 to 50OC), wide(-40Oto 60OC) and

extended(-40O to75O C)temperatureranges

MEF9 and 14Certified Compliant

NEBSLevel 3Compliant

LifetimeWarrantyandfree 24/7TechnicalSupport

iConverter fiber access Network Interface

Devicesandmediaconvertersare MEF9and

14 certified compliant and NEBS Level 3

compliant. iConverter NIDs enable

Carrier-GradeOptical Ethernetwithreliability

andperformancemonitoringtosupportService

LevelAgreements(SLAs).

ThemodulardesignofiConverter fiberaccess

equipment future-proofs Metro Ethernet

services with scalability of network services

and lowers operating costs with

comprehensive OAM management and

provisioning.

iConverter

Tabletop

Wall-Mount

Plug-in

Fiber Port Options

The2GXM2SmallFormPluggable(SFP)modelsupportsawide

varietyof SFPtransceivers forFTTX andCWDM applications.

SFPfiber transceiversare availablewith multimode(MM) dual

fiber,single-mode (SM)dualfiber andsingle-mode single-fiber

(SF)options. They support LCconnectors with distancesup to

550m over MM fiber, 140km over SM fiber and 40km over SF.

SFPtransceiversareavailablein20nmincrements from 1270nm

to1610nmto supportFTTX and CWDMapplications.

Link Modes

The2GXM2featuresmultiple,user-selectablelinkfaultdetection

modes, including Link Fault Propagation, Remote Fault

DetectionandAsymmetricalFaultDetection. TheseLinkModes

providerapidfaultdetectionandisolationbymonitoringthestate

ofthecablinghardware,andoperateindependentlyofthenetwork

management.

Tag VLAN, Port VLAN and QoS

The iConverter 2GXM2 supports the IEEE 802.1Q tag Virtual

Local Area Network (VLAN) packet tagging and untagging

(including Q-in-Q) and the 802.1p Quality of Service priority

standards.

2GXM2 VLAN 802.1ad tunneling technology enables service

providers to offer their customers E-Line and E-LAN services

(via Ethernet Virtual Circuit or EVC), which connect multiple

business LANs at different locations and make their networks

appear to be on the same local network. Q-in-Q Service tags

transparently transports customer network traffic across the

service provider network, isolating it from other customer and

serviceprovidermanagementtraffic.

2GXM2 Port VLAN enables the ability to specify and restrict

trafficflowbetweenthefiber,backplane and managementports.

The802.1pprioritization standard enablesdeliveryofQuality of

Service (QoS) to high-priority, real-time applications such as

voiceandvideooverEthernet.

Port Bandwidth Control and Port Access Control

The enhanced Bandwidth Control feature supports levels of

bandwidth between the fiber ports in 64Kbps increments from

64K to Full Line Speed.

The 2GXM2 features Port Access Control which blocks user

servicewhilemaintainingthe network link. PortAccessControl

enables the service provider to control user access while

maintainingport configurationfor easydisabling orenabling of

customer service. Port Access Control provides enterprise

administrators the capability to improve network security by

controlling port access when the port is not in use.

Port Statistics and Optical Performance Statistics

The 2GXM2 supports reporting of utilization, port and optical

performancestatistics. Portstatisticsareavailablefor38different

variablesforthefiberports. Additionally,fullopticalperformance

statistics are available on SFP fiber transceivers with a digital

diagnostic bus.

Port and optical performance statistics reporting provides the

ability to monitor customer bandwidth utilization, network

performanceand thelink signal qualityfor eachindividual port.

IEEE802.3ah Operations, Administration andMaintenance

The2GXM2supportstheIEEE802.3ahOAMstandard,including

FaultDetection,PerformanceMonitoringandRemoteLoopback.

Fault Detection

The2GXM2 detectsand indicateslink failures,dying gasp and

othercritical events. The 2GXM2 also supportsUnidirectional

Link Fault Detection that indicates faults in either direction of

the fiber link.

Performance Monitoring

802.3ahPerformanceMonitoringtoolsareusedforthedetection

and notification of link performance (quality) faults. Ethernet

data performance can deteriorate slowly before disrupting

service,and the2GXM2 allowsthe settingof error-per-second

thresholds. Once the pre-set error threshold is exceeded, an

eventnotificationis generated thatprovidesearly indication ofa

problemthat may beresolved prior toloss of service.

Remote Loopback

Remote Loopback is used for fault localization and link

performancetesting. Whena 2GXM2 portisin loopback mode,

all received service traffic is looped back and transmitted back

unaltered. The statistics from the 2GXM2 port and the remote

link partner can be compared for consistency.

At the Central Office, the 2GXM2 plug-in module is installed

in a managed iConverter 19-Module chassis providing

high-density fiber access. At Customer Premises 1 and 2,

the 2GXM2 standalone NID provides a fiber uplink port for

intelligent demarcation of Ethernet services.

Page 2

The 2GXM2 has integrated management, eliminating the cost

and space required for external management hardware.

The iConverter management system provides comprehensive

remote configuration and performance monitoring. iConverter

managementreducesoperationalexpendituresbykeepingtruck

rolls to a minimum through remote provisioning, unidirectional

fault detection, trapnotification and loopback capabilities.

iConverter management is available out-of-band via IP-Less

protocol using the 802.3ah OAM channel or Omnitron’s Secure

OAMchannel, or in-bandusing SNMPorTelnet.

Management is accessed via Omnitron’s NetOutlook®SNMP

NetworkManagementSoftwarewithan intuitive GraphicalUser

Interface, or third party SNMP software. Telnet and CLI

managementinterfacesare alsosupported,and utilizeaneasy

touse,menu-driveninterface. TheCLI interface isaccessedvia

aSerialConsolePort,thatprovideslocalconfigurationandallows

forfirmwareupdates. Additionally, theportcan be connectedto

aserialmodemtoprovideanalternativeremotemanagementpath.

IP-Based Management

The 2GXM2 can be managed through IP protocols, SNMPv1,

SNMPv2c,SNMPv3 andTelnet.The IPaddressof the 2GXM2

canbe user-definedor resolved throughthe DHCPhost onthe

network. The IP protocols for management access can be

enabled or disabled individually or as a group. Access to the

managementisprotectedbypasswordauthentication.SMNPv3

strengthens secure access to devices by a combination of

authenticating and encrypting packets over the network.

Management VLAN can also be defined to separate

managementtraffic from customertraffic.

802.3ah and Secure OAM Management Channels

Whenutilizing a RemoteOAM management channel (Secure

IP-less or 802.3ah), the NID at the Customer Premises is

securelymanagedby its fiberlinkpartner locatedattheCentral

Office or Point of Presence. The management network IP

addressisnot available tothecustomernetwork and isisolated

bythe iConverter NetworkManagement Module(NMM) inthe

19-ModuleChassis at theCentral Office.

A management processor on the iConverter 2GXM2 in the

19-Module Chassis isolates the encrypted management data

fromthe customerdata and communicateswith theNMM viaa

separatemanagement backplanebus. Management traffic on

theuserdatalinesisIP-lessandcarriedonasecurelyencrypted

data channel to protect the management from unauthorized

access.The chassis atthe Central Officerequires onlyasingle

IP address to manage itself and all of the connected remote

chassis managed by the Remote OAM channel. This is the

ideal configuration for networks that separate secure

managementtrafficfromtheservice(customer)trafficondifferent

networks,orwhenmanagementIPaddressesareatapremium.

Page 3

Description 1000BASE-X to 1000BASE-X Fiber

Media Converter and Network Interface Device

Protocols 1000BASE-X

with10,240 bytes max. frame size

Fiber Cables Multimode: 50/125, 62.5/125, 100/140µm

Single-mode: 9/125µm

Serial Cable RS-232, 22 to 24 AWG, 12 to 50 pF/ft.

Fiber Connectors Small Form Pluggable (SFP)

Serial Connector Mini DIN-6 female,

mini DIN-6 male to DB-9 female adapter included

Controls DIP-Switches and LEDs

DC Power Plug-In Module: 1.1A @ 3.3VDC

Standalone: 8-15VDC,

0.5A @ 9VDC

DC Power Connector Plug-In: Power supplied by backplane

Standalone: 2.5mm Barrel Connector or

Field-wireable Terminal Connector

AC Power Adapter

[US] Plug-In Module: N/A

Standalone: 100-120VAC/60Hz

0.05A @ 120VAC

AC Power Adapter

[Universal] Plug-In Module: N/A

Standalone: 100-240VAC/50-60Hz

0.05A @ 120VAC

Dimensions Plug-In Module: W:0.85" x D:4.5" x H:2.8"

Standalone: W:3.1" x D:4.8" x H:1.0"

Wallmount: W:3.8" x D:4.8" x H:1.0"

Weight

without power adapter Plug-In Module: 8oz.

Standalone: 1 lb.

Weight

with power adapter Plug-In Module: N/A

Standalone: 1.5 lb.

Compliance UL, CE, FCC Class A, MEF 9, MEF 14

IP-Based Management Telnet; SNMPv1, SNMPv2c, SNMPv3

Temperature Standard Operating: 0 to 50º C

Wide Operating: -40 to 60º C

Extended Operating: -40 to 75º C

Storage: -40 to 80º C

Humidity 5% to 95% (non-condensing)

Altitude -100m to 4000m (Operational)

MTBF (Hours) Plug-In Module: 540,000

Standalone without Power Adapter: 540,000

Standalone With Power Adapter: 250,000

Trademarks are owned by their respective companies. iConverter and NetOutlook are a registered trademarks of Omnitron Systems.

8999N-0-xx

<Blank> Standard Operating Temperature Range Model

Wide Temperature Range ModelOperating

Extended Operating Temperature Range Model

<Blank> Plug-In Module

Tabletop with External US AC Power Supply

Tabletop Universal AC Power Supplywith External

Tabletop with DC Terminal Power

Wall-Mount External US AC Power Supplywith

Wall-Mount External Universal AC Power Supplywith

Wall-Mount DC Terminal Powerwith

Page 4

Formore informationon thevariety ofSFPs available,visit Omnitron’swebsite at: www.omnitron-systems.com

SFP Ordering Information

Fiber Type Distance Model

Number

Wavelength

[nm]

Wavelength

[nm]

Min. Tx

Power

[dBm]

Max. Tx

Power

[dBm]

Min. Rx

Sense

[dBm]

Max. Rx

Power

[dBm]

Min.

Attenuation

(dBm)

Link

Budget

(dB)

Gigabit Ethernet

MM 220m / 550m 7206-0 850 850 -10 -4 -17 -3 - 7

SM 15km 7207-1 1310 1310 -9.5 -3 -19.5 -3 -10

SM-SF 20km 7214-1 1310 1550 -9.5 -3 -20 -3 -10.5

SM-SF 20km 7215-1 1550 1310 -9.5 -3 -20 -3 -10.5

SM-SF 40km 7214-2 1310 1550 -3 0-20 -3 317

SM-SF 40km 7215-2 1550 1310 -3 0-20 -3 317

*See SFP data sheet (091-17000-001) for other supported transceiver models.

Otros manuales de Convertidor de medios de Omnitron Systems Technology

Omnitron Systems Technology

Omnitron Systems Technology iConverter 2FXM2 Manual de usuario

Omnitron Systems Technology

Omnitron Systems Technology iConverter 2FXM2 Manual de usuario

Omnitron Systems Technology

Omnitron Systems Technology iConverter 10/100VT Manual de usuario

Omnitron Systems Technology

Omnitron Systems Technology iConverter CWDM/X Manual de usuario

Omnitron Systems Technology

Omnitron Systems Technology Omnitron iConverter 10/100M2 Manual de usuario

Omnitron Systems Technology

Omnitron Systems Technology FlexPoint 10FL/2 Manual de usuario

Omnitron Systems Technology

Omnitron Systems Technology 4/16 Token Ring Fiber Converter OmniHawk Manual de usuario

Omnitron Systems Technology

Omnitron Systems Technology miConverter 10/100 Plus Manual de usuario

Omnitron Systems Technology

Omnitron Systems Technology 8599R Series Manual de usuario

Omnitron Systems Technology

Omnitron Systems Technology iConverter XGT+ Manual de usuario

Omnitron Systems Technology

Omnitron Systems Technology iConverter 2GXM Manual de usuario

Omnitron Systems Technology

Omnitron Systems Technology FlexPoint TR Manual de usuario

Omnitron Systems Technology

Omnitron Systems Technology miConverter GX/T Manual de usuario

Omnitron Systems Technology

Omnitron Systems Technology OmniConverter GPoE+/S Manual de usuario

Omnitron Systems Technology

Omnitron Systems Technology OmniRepeater 400 Manual de usuario

Omnitron Systems Technology

Omnitron Systems Technology miConverter Manual de usuario

Omnitron Systems Technology

Omnitron Systems Technology FlexPoint 100Fx/Tx Manual de usuario

Omnitron Systems Technology

Omnitron Systems Technology Serial RS-422 and RS-485 to Fiber Media Converter... Manual de usuario

Omnitron Systems Technology

Omnitron Systems Technology iConverter GX/T2 Manual de usuario

Omnitron Systems Technology

Omnitron Systems Technology Omnitron iConverter 10/100M Manual de usuario

Omnitron Systems Technology

Omnitron Systems Technology miConverter 10/100 Plus Manual de usuario

Omnitron Systems Technology

Omnitron Systems Technology 10/100 Media Converter miConverter Manual de usuario

Omnitron Systems Technology

Omnitron Systems Technology miConverter GX/T Manual de usuario

Omnitron Systems Technology

Omnitron Systems Technology iconverter t3 Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario

Omnitron Systems Technology iConverter 2GXM2 Manual de usuario

Manuales populares de Convertidor de medios de otras marcas