Omega FMG90 Series Manual de usuario

omega.com

e-mail: [email protected]

For latest product manuals:

omegamanual.info

FMG90 Series

Electromagnetic Flow Meter

Shop online at

User’s Guide

Table of contents page

1About this operating manual....................................................................................4

2Device description...................................................................................................5

2.1 Intended use....................................................................................................6

2.1 Exclusion of liability .........................................................................................6

3Safety instructions...................................................................................................7

4Construction and function .......................................................................................8

5Installation...............................................................................................................8

5.1Installation instructions ...........................................................................................9

5.2 Assembly.......................................................................................................10

6Electrical connection .............................................................................................11

7Commissioning and measuring operation .............................................................12

7.1 Commissioning ..............................................................................................12

7.2 Measuring operation......................................................................................12

8Maintenance..........................................................................................................12

9Disassembly and disposal.....................................................................................13

10Technical data....................................................................................................... 14

10.1 Materials table ..............................................................................................15

10.2 Pressure drop............................................................................................... 15

10.3 Dimensions...................................................................................................16

The reproduction, distribution and utilization of this operating manual as well as the

communication of its contents to others without express authorization is prohibited.

the grant of a patent, utility model or design.

1 About this operating manual

•The operating manual is aimed at specialists and semi-skilled personnel.

•Before each step, read through the relevant advice carefully and keep to the specified order.

•Thoroughly read and understand the information in the section (Safety Instructions "3").

If you have any problems or questions, please contact:

One Omega Dr. Box 4047

Stamford, CT 06907-0047

Tel: (203) 359-1660

e-mail: [email protected]

Hazard signs and other symbols used:

WARNING! / CAUTION! Risk of injury!

This sign indicates dangers that cause personal injuries that can lead to health defects or

cause considerable damage to property.

CAUTION! Electric current!

This sign indicates dangers which could arise from handling of electric current.

CAUTION! Material damage!

This sign indicates actions which could lead to possible damage to material or environmental

damage.

ADHERE TO OPERATING MANUAL!

NOTICE!

This symbol indicates important notices,

tips or information.

NO DOMESTIC WASTE!

The device must not be disposed of

together with domestic waste.

Pay attention to and comply with

information that is marked with this symbol.

ªFollow the specified instructions and steps.

Adhere to the given order.

Check the specified points or notices.

JReference to another section, document or

source.

• Item.

2 Device description

The FMG90 series from Omega, is a non-contact flow sensor. The measurement is

performed using magnetic induction and works without any moving parts.

The FMG90 is used for measuring or metering water and aqueous solutions. The compact

design and independence from the intake and discharge sections allows the FMG90 to be

used under a variety of conditions.

Components:

cSensor housing:

The sensor housing consists of plastic and has the IP65 degree of protection.

dElectrical connection:

The electrical connection is made via 4-pin plug M12x1.

eOperation / flow indicator LED.

fType plate with flow direction (marking)

gProcess connection:

The process connections are available in different sizes.

2.1 Intended use

The magnetic inductive flow sensor FMG90 must only be used for measuring and metering

liquids with a minimum conductivity of 20 μS/cm.

WARNING! No safety component!

The magnetic inductive flow sensor of the series FMG90 are not safety components in

accordance with Directive 2006-42-EC (Machine Directive).

ªNever use the FMG90 as a safety component.

The operational safety of the device supplied is only guaranteed within its intended use. The

specified limits (see Technical Data "10") may under no circumstances be exceeded.

Before installing the device, check that the wetted materials of the device are compatible with

the media being used (see Materials Table "10.1").

Measuring tube empty (or partially filled). / Conductivity too low.

The green LED may blink irregularly if the measuring tube of the FMG90 is empty or

partially filled or if the conductivity of the fluid being used is too low. Random pulses will

be present at the output, but they do not represent an actual flow.

ªEnsure that the measuring tube of the FMG90 is always completely filled (see

Installation Instructions "5.1").

ªEnsure that the conductivity of the fluid is at least 20 μS/cm.

2.1 Exclusion of liability

We accept no liability for any damage or malfunctions resulting from incorrect installation,

inappropriate use of the device or failure to follow the instructions in this operating manual.

3 Safety instructions

Before you install the FMG90, read through this operating manual carefully. If the

instructions contained within it are not followed, in particular the safety guidelines, this

could result in danger for people, the environment, and the device and the system it is

connected to.

The FMG90 correspond to the state-of-the-art technology. This concerns the accuracy, the

operating mode and the safe operation of the device.

In order to guarantee that the device operates safely, the operator must act competently and

be conscious of safety issues.

Omega provides support for the use of its products either personally or via relevant literature.

The customer verifies that our product is fit for purpose based on our technical information.

The customer performs customer- and application-specific tests to ensure that the product is

suitable for the intended use. With this verification all hazards and risks are transferred to our

customers; our warranty is not valid.

Qualified personnel:

The personnel who are charged for the installation, operation and maintenance of the

FMG90 must hold a relevant qualification. This can be based on training or relevant

tuition.

The personnel must be aware of this operating manual and have access to it at all times.

The electrical connection should only be carried out by a fully qualified electrician.

General safety instructions:

In all work, the existing national regulations for accident prevention and safety in the

workplace must be complied with. Any internal regulations of the operator must also be

complied with, even if these are not mentioned in this manual.

Degree of protection according to EN 60529:

Please ensure that the ambient conditions at the site of use does not exceed the

requirements for the stated protection rating (see Technical Data "10").

Only use the FMG90 if it is in perfect condition. Damaged or faulty devices must be

checked without delay and, if necessary, replaced.

When fitting, connecting and removing the FMG90 use only suitable appropriate tools.

Do not remove or obliterate type plates or other markings on the device, as otherwise the

warranty is rendered null and void.

Special safety instructions:

(Further) Warnings that are specifically relevant to individual operating procedures or activities

can be found at the beginning of the relevant sections of this operating manual.

4 Construction and function

Construction:

The measuring tube with its earthing sleeves and electrodes

passes through the sensor housing and forms the external

process connection of the FMG90.

A magnetic field for the measurement process is generated inside

the sensor housing, which also contains the sensor and signal

conditioning circuitry.

The two stainless steel electrodes are located in the middle of the

measuring tube between the earthing sleeves. The FMG90 does

not need any moving parts to make measurements. The inside of

the measuring tube is completely open, allowing the fluid to flow

unhindered through the measuring tube.

Function:

The magnetic inductive flow sensor functions according to the induction principle:

The measuring tube is located in a magnetic field (B). If

an electrically conductive medium (V) flows through the

measuring tube and, therefore, at right angles to the

magnetic field, a voltage (U) which is proportional to

the mean flow velocity will be induced in the medium

and subsequently picked up by the two electrodes.

5 Installation

Before installing, check that

the wetted materials of the device are suitable for the media being used (see Materials

Table "10.1").

the equipment is switched off and is in a safe and de-energised state.

the equipment is depressurised and has cooled down.

SUITABLE TOOLS:

Use only suitable tools of the correct size.

5.1 Installation instructions

CAUTION!

Risk of malfunction due to external magnetic fields!

Magnetic fields close to the device can cause malfunctions and

should be avoided.

ªEnsure that no external magnetic fields are present at the

installation site of the FMG90.

•The FMG90 can always be installed anywhere along the pipeline. Straight sections of

piping are preferable, however.

•Installation can occur in horizontal and vertical pipes. The flow sensor is only suitable for

application in completely filled pipe systems.

•As a matter of principle magnetic inductive flow sensors are widely independent from the

flow profile. An inlet section is not absolutely necessary.

To reach a most highly accuracy of the measurement, you should use straight inlet and

outlet sections according to the nominal pipe diameter (DN). The inlet pipe section has to

be at least 10 x DN; the outlet section 5 x DN in order to achieve the specified accuracy.

•The inlet and outlet sections and the gaskets must have the same or a slightly larger

inside diameter than the measuring tube in order to achieve the specified accuracy.

•If two or more FMG90 devices are used side by side, maintain

a separation of at least 2.5 cm between adjacent devices.

If adjacent devices are too close together, operation of both

devices may be impaired due to mutual interference.

5.2 Assembly

The FMG90 is installed directly into the pipeline. The compact design and light weight of the

unit make wall-mounting unnecessary.

IMPORTANT NOTICES:

• Only use suitable gaskets for installation.

• Observe the flow direction indicated on the type plate.

• Observe the mounting dimensions.

ªTo ensure the best possible measuring accuracy, a horizontal

installation position with increasing flow is preferable (no

collecting of dirt deposits).

ªInstall the appropriate screwed connections at the installation

location.

ªInsert the FMG90 together with the gaskets.

ªScrew the union nuts of the screwed connection onto the

process connections of the FMG90.

ªTighten both union nuts with a maximum torque of 5 Nm.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Omega

Omega

Omega HH800-SW Manual de usuario

Omega

Omega FMG90B Series Manual de usuario

Omega

Omega iServer 2 Series Manual de usuario

Omega

Omega FPD-4000 Series Manual de usuario

Omega

Omega FMA1700A Manual de usuario

Omega

Omega HHP8200 Series Manual de usuario

Omega

Omega DP41-B Series Manual de usuario

Omega

Omega CN1001-TC Manual de usuario

Omega

Omega PHCN-962 Manual de usuario

Omega

Omega DP24-E Manual de usuario

Omega

Omega Volume VII-System Description Manual de usuario

Omega

Omega RD2800 Series Manual de usuario

Omega

Omega FPR300 Series Manual de usuario

Omega

Omega TCL-3M165E2 Series Manual de usuario

Omega

Omega DP3001 Manual de usuario

Omega

Omega PHH444 Manual de usuario

Omega

Omega PRESSURE GAUGES DPG3000 Manual de usuario

Omega

Omega DP25B-E Manual de usuario

Omega

Omega HHP360 Series Manual de usuario

Omega

Omega DPG108 Manual de usuario

Omega

Omega DP18-RT1 Manual de usuario

Omega

Omega RD-MV100 Series Manual de usuario

Omega

Omega DP25B-S Manual de usuario

Omega

Omega HHSL402SD Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario