Omega DP24-E Manual de usuario

omega.com

e-mail: [email protected]

For latest product manuals

www.omegamanual.info

User’s Guide

DP24-E

Process Meter

Shop on line at

RoHS 2 Compliant

It is the policy of OMEGA to comply with all worldwide safety and EMC/EMI regulations that apply.

OMEGA is constantly pursuing certification of its products to the European New Approach Directives.

OMEGA will add the mark to every appropriate device upon certification.

The information contained in this document is believed to be correct but OMEGA Engineering, Inc. accepts no liability for

any errors it contains, and reserves the right to alter specifications without notice.

WARNING: These products are not designed for use in, and should not be used for, patient connected applications.

This device is marked with the international caution symbol. It is important to read the Setup Guide before installing

or commissioning this device as it contains important information relating to safety and EMC.

Servicing North America:

USA: One Omega Drive, P.O. Box 4047

ISO 9001 Certified

 Stamford CT 06907-0047

 TEL: (203) 359-1660 FAX: (203) 359-7700

 e-mail: [email protected]

Canada:  976 Bergar

 Laval (Quebec) 7L 5A1

 TEL: (514) 856-6928 FAX: (514) 856-6886

 e-mail: [email protected]

For immediate technical or application assistance:

USA and Canada: Sales Service: 1-800-826-6342 / 1-800-TC-OMEGA

 Customer Service: 1-800-622-2378 / 1-800-622-BEST

 Engineering Service: 1-800-872-9436 / 1-800-USA-W EN

Mexico and  TEL: (001) 203-359-7803 FAX: (001) 203-359-7807

Latin American:e-mail: [email protected]



Servicing urope:

Benelux: TEL: +31 20 3472121 FAX: +31 20 6434643

 Toll Free in Benelux: 0800 0993344

 e-mail: [email protected]

Czech Republic: Frystatska 184, 733 01 Karviná

 TEL: +420 59 6311899 FAX: +420 59 6311114

 e-mail: [email protected]

OM GAnet® On-Line Service

www.omega.com

Internet e-mail

[email protected]

France: TEL: +33 1 61 37 29 00 FAX: +33 1 30 57 54 27

 Toll Free in France: 0800 466 342

 e-mail: [email protected]

Germany/Austria: Daimlerstrasse 26, D-75392 Deckenpfronn, Germany

 TEL: +49 7056 9398-0 F

AX: +49 7056 9398-29

 Toll Free in Germany: 0800 639 7678

 e-mail: [email protected]

United Kingdom: One Omega Drive

PREFACE

MANUAL OBJECTIVES

This manual shows you how to set up and use the Programmable Process meter.

NOTES, WARNINGS and CAUTIONS

Information that is especially important to note is identified by three labels:

• NOTE

• WARNING

• CAUTION

• IMPORTANT

NOTE: provides you with information that is important to successfully

setup and use of the Process meter.

CAUTION or WARNING: tells you about the risk of electric shock.

CAUTION, WARNING or IMPORTANT: tells you of circumstances

or practices that can effect the meter's functionality and must refer to

accompanying documents.

Table of Contents

Section Page

SEC 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1. Safety Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . .

SEC 2 ABOUT THE METER. . . . . . . . . . . . . . . . . . . . . . . . . . 3

.1 Front of the Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

. Back of the Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

.3 Disassembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

SEC 3 GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3.1 Changing Configuration Jumpers. . . . . . . . . . . . . . . . . . . 7

3. Mounting the Meter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3.3 Connecting Sensor Input . . . . . . . . . . . . . . . . . . . . . . . . . 9

3.4 Connecting Main Power. . . . . . . . . . . . . . . . . . . . . . . . . 1

SEC 4 CONFIGURING THE METER . . . . . . . . . . . . . . . . . 13

4.1 Selecting the Input Range . . . . . . . . . . . . . . . . . . . . . . . 13

4. Selecting a Decimal Point Position. . . . . . . . . . . . . . . . . 14

4.3 Scaling the Meter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

4.3.1 Internal Scaling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

4.3. Live Scaling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

4.4 Changing the Meter’s Calibration. . . . . . . . . . . . . . . . . . 17

APPENDICES

A Checking and Changing Main Board Power Jumpers. . . 19

B Reference Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

C Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

List of Figures

Figures Page

-1 Front-Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

- Connectors (ac-Powered and dc-Powered) . . . . . . . . . . . . . . .5

-3 dc-Power Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

3-1 S1 - S4 Jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

3- Meter - Exploded View . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

3-3 Panel Cut-Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

3-4 3-Wire dc Voltage Input Connections

with Internal Excitation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

3-5 -Wire dc Voltage Input Connections

with External Excitation . . . . . . . . . . . . . . . . . . . . . . . . . . .10

3-6 4- 0 mA Input Connections with External Excitation . . . . . .10

3-7 4- 0 mA Transmitter Hook-Up with Internal Excitation . . . .11

3-8 dc Current Input Connections with Current Source . . . . . . .11

3-9 Main Power Connections ac . . . . . . . . . . . . . . . . . . . . . . . . 1

3-10 Main Power Connections dc . . . . . . . . . . . . . . . . . . . . . . . .1

A-1 115Vac Jumper Wiring (default) . . . . . . . . . . . . . . . . . . . . . .19

A- 30 Vac Jumper Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0

C-1 Meter Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

List of Tables

Table Page

-1 Connector Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3-1 S1 - S4 DIP Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3- ac Power Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

4-1 Meter Calibration Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

B-1 Display Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

B- Menu Configuration Displays . . . . . . . . . . . . . . . . . . . . . . . 1

B-3 Run Mode Displays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B-4 Factory Preset Values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

iii

NOTES

SECTION 1. INTRODUCTION

1.1 UNPACKING

Remove the Packing List and verify that you have received all equipment. If

there are any questions about the shipment, use the phone numbers listed on the

back cover to contact the Customer Service Department nearest you.

Upon receipt of shipment, inspect the container and equipment for any signs of

damage. Note any evidence of rough handling in transit. Immediately report any

damage to the shipping agent.

The carrier will not honor any claims unless all shipping material is

saved for their examination. After examining and removing contents,

save packing material and carton in the event reshipment is necessary.

Verify that you receive the following items in the shipping box:

QTY DESCRIPTION

1 Programmable indicator/controller with all applicable connectors

attached.

1 Owner’s Manual

1 Quick Start Manual

If you ordered any of the available options (except the “ L” blank Lens

option), they will be shipped in a separate container to avoid any

damage to your indicator/controler.

1.2 SAFETY CONSIDERATIONS

This device is marked with the international caution symbol. It is important to

read this manual before installing or commissioning this device as it contains

important information relating to Safety and MC (Electromagnetic Compatibility).

This instrument is a panel mount device protected in accordance with EN 61010-

1:2001, electrical safety requirements for electrical equipment for measurement, con-

trol and laboratory. Installation of this instrument should be done by qualified person-

nel. In order to ensure safe operation, the following instructions should be followed.

This instrument has no power-on switch. An external switch or circuit-breaker shall

be included in the building installation as a disconnecting device. It shall be marked to

indicate this function, and it shall be in close proximity to the equipment within easy

reach of the operator. The switch or circuit-breaker shall not interrupt the Protective

Conductor (Earth wire), and it shall meet the relevant requirements of IEC 947–1 and

IEC 947-3 (International Electrotechnical Commission). The switch shall not be incor-

porated in the main supply cord.

Furthermore, to provide protection against excessive energy being drawn from the

main supply in case of a fault in the equipment, an overcurrent protection device shall

be installed.

• Do not exceed voltage rating on the label located on the top of the instrument

housing.

• Always disconnect power before changing signal and power connections.

• Do not use this instrument on a work bench without its case for safety reasons.

• Do not operate this instrument in flammable or explosive atmospheres.

• Do not expose this instrument to rain or moisture.

• Unit mounting should allow for adequate ventilation to ensure instrument does not

exceed operating temperature rating.

• Use electrical wires with adequate size to handle mechanical strain and power

requirements. Install without exposing bare wire outside the connector to minimize

electrical shock hazards.

MC Considerations

• Whenever EMC is an issue, always use shielded cables.

• Never run signal and power wires in the same conduit.

• Use signal wire connections with twisted-pair cables.

• Install Ferrite Bead(s) on signal wires close to the instrument if EMC problems

persist.

Failure to follow all instructions and warnings may result in injury!

Note ☞

SECTION 2. ABOUT THE METER

2.1 FRONT OF THE METER

Figure -1 shows each part of the front of the meter.

Figure 2-1. Front Panel

METER DISPLAY:

Digital LED display: ¡.9.9.9. or 9.9.9.9. 4-digit 7–segment, 0.56" high LED

display with programmable decimal point.

METER MODES:

Run Mode The meter is in the run mode when the display is actively

showing a process.

Configuration Mode The meter is in the configuration mode when you press the

MENU button to enable meter configurations.

METER BUTTONS

T-RST button - Clears the tare value.

£/MAX button - In the run mode, press the £/MAX button to show the

maximum value if jumper S3 is installed: the meter momentarily shows

“####”, then flashes the maximum value encountered since the last peak

reset. Press the £/MAX button to show the VALLEY value if jumper S3 is

removed: the meter momentarily shows “™™™™”, then flashes the minimum

value encountered since the last valley reset. In the configuration mode, press

the £/MAX button to change the flashing digit’s value (increments by one).

£/TARE button - In the run mode, press the £/TARE button to tare the

display value to zero. In the configuration mode, press the £/TARE button to

scroll through available choices, or to move one digit to the right.

MENU button - In the run mode, press the MENU button to enable meter

configuration changes. Refer to specific procedure for more details.

RESET button - In the run mode, press the RESET button to reset the Peak

and Valley registers: the meter momentarily shows “PrSt” or “VrSt” , then

resets both values. In the configuration mode, press the RESET button twice

quickly to escape from the configuration mode.

Otros manuales para DP24-E

Tabla de contenidos

Otros manuales de Instrumento de medición de Omega

Omega

Omega FTB500 Series Manual de usuario

Omega

Omega CL1000 Series Manual de usuario

Omega

Omega THDP-10 Series Manual de usuario

Omega

Omega DP25B-S Manual de usuario

Omega

Omega TRCN443 Manual de usuario

Omega

Omega DP18-SC Manual de usuario

Omega

Omega FMG90B Series Manual de usuario

Omega

Omega DPG1000AD Manual de usuario

Omega

Omega DP24-T Manual de usuario

Omega

Omega FL-2500 Manual de usuario

Omega

Omega HHC230 Manual de usuario

Omega

Omega Vortex FV100 Series Manual de usuario

Omega

Omega HHP350 Series Manual de usuario

Omega

Omega FMG3000 SERIES Manual de usuario

Omega

Omega DP25B-S Manual de usuario

Omega

Omega DP18-RV1 Manual de usuario

Omega

Omega DPG409 SERIES Manual de usuario

Omega

Omega MASS FLOW FMA-1900 Manual de usuario

Omega

Omega Volume VII-System Description Manual de usuario

Omega

Omega DMD4008 Manual de usuario

Omega

Omega DP18-RT1 Manual de usuario

Omega

Omega RH820 Manual de usuario

Omega

Omega HHM598 Manual de usuario

Omega

Omega RH62F Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario