Omega Freedom 500 Manual de usuario

Owner's Guide

Freedom-500

MO_FREEDOM-500 / REV0 4/01

Limited Lifetime Warranty

NOTE: This is a “place marker”

cover. The production unit has

a color cover.

Please send me:

_____pcs. #442-09B _____pcs. #442-09S _____pcs. #441-07 _____pcs. #431-09

4-Button Black 4-Button Silver 4-Button “OEM Style” 3-Button “Freedom”

My name and address is:

NAME________________________________________________________

ADDRESS___________________________________________________

CITY_________________________________________________________

STATE & ZIP_________________________________________________

TELEPHONE_________________________________________________

I have enclosed a check or money order for $______________.

I would like to charge my order. My ___________________ credit card

number is______________________________which expires___________ .

Credit card holder name_______________________________________

TYPE OF CREDIT CARD

ThisdevicecomplieswithFCCRulespart15.Operationissubjecttothefollowing

two conditions, (1) This device may not cause harmful interference and, (2) This

device must accept any interference that may be received, including interference

that may cause undesired operation.

The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modifications to this equipment. Such modifications could void the

user's authority to operate the equipment.

The standard

transmitter is

part number

442-09B

(black) & 442-

09S (silver).

Page 2

An optional

transmitter

is part num-

ber 441-07.

Another op-

tional trans-

mitter is part

number 431-

09, which is

useful for “1

Transmitter Options

The following remote-control transmitters will operate the Freedom-500

vehicle security and convenience system:

Up to four transmitters can operate the system;

see pages 30-31 for transmitter ordering instructions.

button arm/disarm”

operation.

Page 3

“Quick Reference” of Transmitter Functions

The “Arm/Lock” Button

Pressing and releasing the

Arm/LockButtonwillarmthe

system and lock all of the

doors. Press and hold this

button to activate Remote

Panicwithlocking doors.

Red/Green Light

Illuminateswheneverany transmitterbuttonis pressed,

and its color indicates multiple vehicle operation.

The “Button #4”

Pressing and holding Button #4

activates the 3rd Channel Output. Or, if

desired this button may be configured to

insteadactivatetheRemotePanicfeature.

The “Disarm/Unlock” Button

Pressing and releasing the

Disarm/UnlockButtonwilldisarm

the system and unlock all of

the doors. Press and hold

this button to activate

Remote Panic with

unlocking doors.

Your system may be configured

to lock your doors upon turning the

ignition "On", and unlock them when

the ignition is turned "Off". Your system

is capable of being operated by up to 4

transmitters, which are available from where

you purchased your system, or see pages 30-31.

The “Trunk” Button

Pressing and holding the

Trunk Button will activate

remote trunk release,

disarms the system unlocks

the doors.

Multi-Vehicle Switch

Is used to independently

operate Freedom-500

systems in two vehicles.

Page 30

Unauthorized Transmitter Alert: For the next 48 hours after transmitter

programming,everytimethevehicle’signitionisturned“On”,thesystem will emit

a series of siren chirps, and the LED Status Indicator will show the number of

programmedtransmittersfor90secondsinsteadof10seconds. Astheinstructions

above shows, programming extra transmitters to any vehicle security system is

easy; the exclusive patented Unauthorized Transmitter Alert feature protects

against someone programming their own transmitter to operate your system.

Replacement and Optional Transmitters

Replacement or optional transmitters are readily available from the dealer from

which you purchased your system; or may purchased directly from Omega

ResearchandDevelopment. TransmitterspurchasedfromOmegaare$35.00

each, which includes shipping and handling. You may view your transmitter

options on page 2 of this manual, or on the Internet at “www.caralarm.com”.

To order transmitters from Omega direct, please use the form, which can be cut

fromthismanualorphotocopied,andlegiblyfillintheneededinformation.

Please

send a street address. Your transmitter(s) will be shipped UPS, which will

not deliver to a P.O. Box.

Please remit $ 35.00 for each transmitter ordered;

personal check, money order or credit card are acceptable. Mail order form to:

Omega Research and Development, Inc.

P. O. Box 508

Douglasville, Georgia 30133

Page 29

How to Program Transmitters to the System

Whenever a transmitter, new or existing, is programmed to the system, all exist-

ing codes are erased for security. So all of the transmitters which are to operate

the system, which can be up to four, must be programmed at the same time.

Toprogram morefeatures, simplyrepeat Steps3 and4. If sevenseconds expire

withoutany programmingactivity thesystem willautomatically exitFeatures Pro-

gramming Mode. Turning on the ignition switch will also exit the system from

Features Programming Mode; in either case the system signals the exit with two

siren bursts.

Table of Contents

Page 4

The Freedom-500 Owner’s Guide

“Quick Reference” of the Transmitter Functions........................................................................... 3

Introduction .................................................................................................................................... 5

Arming the System ..................................................................................................................... 6-8

System Armed & Activated ........................................................................................................ 8-9

Disarming the System ............................................................................................................. 9-10

Silent Arming & Disarming .......................................................................................................... 10

The Auxiliary Channels .......................................................................................................... 11-12

Multiple Vehicle Operation .......................................................................................................... 13

Remote Panic Operation ........................................................................................................ 13-15

Valet Mode & Emergency Override ....................................................................................... 15-17

The LED Status Indicator ....................................................................................................... 18-19

Auxiliary Sensor & Prewarning.................................................................................................... 20

Programmable Anti-Carjacking Protection............................................................................. 21-22

Programmable Features......................................................................................................... 22-27

How to Program Features ...................................................................................................... 28-29

How to Program Transmitters to the System......................................................................... 29-30

Replacement and Optional Transmitters .........................................................................2 & 30-31

Limited Lifetime Warranty .............................................................................................Back Cover

Step 1: Turn "On" the vehicle's ignition.

Step 2: Within 10 seconds press the Valet/Override Switch 5 times. The system

responds with 1 siren burst to confirm Transmitter Programming Mode.

Step 3: Within 10 seconds, press either the Trunk button or Button #4 on each

transmitterto be programmed. The response to each is 1 and 1, 1 and 2,

etc., siren burst then chirp(s).

If 17 seconds expire without any programming activity the system will automati-

callyexit TransmitterProgramming Mode. Turningoff theignition switchwill also

exit the system from Transmitter Programming Mode; in either case the system

signals the exit with 1 long siren chirp.

Introduction

Page 5

Step 1: Turn the vehicle's ignition "On" then "Off".

Step 2: Within 10 seconds of turning the ignition "Off", press the Valet/Override

Switch 5 times. The system will sound a siren burst, then a single chirp

confirming entry to Features Programming Mode.

Step 3: Within 7 seconds of entering Features Programming Mode, press the

Valet/Override Switch the number of times equal to the number of the

feature to be programmed. The system will repeat the feature number

with same number of siren chirps.

Step 4: After the system acknowledges the feature to be programmed, press

eithertheTransmitter Arm/Lock Buttontoturn the featureon (the system’s

response will be 1 chirp), or the Disarm/Unlock Button to turn the feature

off (the system’s response will be 2 chirps).

Page 28

How to Program Features

The 20 programmable features, explained in the previous pages, are very easily

programmed by a procedure using the ignition key, Valet/Override Switch, and

transmitter. To access Features Programming Mode:

Congratulations on the purchase of your vehicle security system. In learning to

operate your system, please become familiar with these three components:

TheTransmitter:Eachsecuritysystemcomeswithtwopre-learnedtransmitters,

butcan learn up to 4 different transmitters. Every transmitter has its own unique,

invisible code, which changes with each use. Thus, your transmitter cannot be

duplicated. The transmitter has four buttons: an “Arm/Lock” button; a “Disarm/

Unlock” button; a “Trunk” button which operates an additional output, and which

alsocanarmanddisarmyoursystemsilently;anda“Button#4”whichcanoperate

another additional output, or be configured to operate the Remote Panic feature.

TheValet/OverrideSwitch:Thisswitchcanbeusedtoturn“Off”thealarmportion

of the system, including the programmable Automatic Last Door Arming and

AutomaticRearmingfeatures,byplacingthesysteminto“ValetMode”.TheValet/

Override Switch can also be used in conjunction with the vehicle’s ignition key to

perform an “Emergency Override” of the system should the transmitter be lost.

Both of these are explained on pages 15-17.

The LED Status Indicator Light: The LED Indicator shows the status of the

system and serves as a visual deterrent to break-ins and theft; see pages 18-19.

Arming the System

THE SIREN WILL

CHIRP ONCE THE PARKING LIGHTS

WILL FLASH ONCE

THE DOORS WILL LOCK

(IF CONNECTED)

Thesystemmaybe"Armed"byoneoftwomethods.Thefirstmethodinvolvesthe

use of a remote transmitter to "Actively" arm the system, provided the ignition

switch is "off" and the system is not in Valet Mode. The second method is a

programmablefeaturecalled“LastDoorArming”inwhichthealarmwill“Passively”

or “self” arm.

To Actively Arm the System:

Press & Release the “Arm/Lock”

Transmitter Button

Page 6

Upon Arming: • The siren will chirp one time.

• The parking lights will flash once.

• The doors will lock. (If an optional interface is connected)

• The starter interrupt will engage.

• The LED Status Indicator will begin to flash slowly.

Press &

Release

Page 27

18. 1 or 2 Button Arm/Disarm: (1 Button / •2 Button)

- This feature controls how the transmitter operates the security system.

Having this feature on the “2 Button” setting has the system operating in a

"dedicatedbuttonforarminganddedicatedbuttonfordisarming"fashion. The

"2Button"settingis thecorrectonetobeusedwiththeincluded transmitters.

If this feature is set for “1 Button”, a single transmitter button will alternate

arminganddisarmingthesystemwitheachpressofthatbutton. Thistypeof

operation is also described as a "single button toggle" for the arming and

disarming of the system. Optional transmitters are available for best use of

this feature. When programming, press Arm/Lock for 1 Button, or Disarm/

Unlock for 2 Button operation.

19. Transmitter Button #4 Operates Remote Panic: (On / •Off)

- Thisfeature, described onpage14, configuresthetransmitter’s Button #4to

operate Remote Panic without locking or unlocking the doors. If this feature

isturnedon,the Auxiliary 3rd Channelisoperatedby pressing andreleasing

Button#4insteadofpressingandholdingit. Whenprogramming,pressArm/

Lock for 3rd Channel, or Disarm/Unlock for Remote Panic operation.

20. Single or Multi-Vehicle Operation: (•Single / Multi-Vehicle)

- This feature is described on page 13. When programming, press Arm/Lock

for Single operation, or Disarm/Unlock for Multi-Vehicle operation.

If a protected zone is open when actively arming using the transmitter, the sys-

tem will still arm, but it will bypass the open zone until the zone is secured.

Page 7

To Passively Arm the System: Turn Ignition Off, Then Open &

Close a Door.

Automatic “Last Door Arming” is a programmable feature which allows the alarm

to arm itself and, if desired, lock the doors upon arming. If “On”, this convenient

featureoffers ahigh level of security since the user does not need to actively arm

the system each time the vehicle is exited. Anytime that the ignition is turned off,

and then a door is opened and closed:

• The siren will chirp one time.

• The LED Status Indicator will begin to flash rapidly.

Thirty seconds later:

• The siren will chirp one time again.

• The LED Status Indicator will begin to flash slowly.

• The starter interrupt will engage.

The alarm is now fully armed. The doors will lock at this time, but only if pro-

grammed to do so, and an optional interface must also be installed.

The system can not Last Door Arm if a protected zone is open. Should a vehicle

door be opened during the arming countdown, the countdown will stop and start

Page 26

Mode, and the Auxiliary 2nd Channel is activated, the system will bypass

the current sensing and sensor zones if the system is armed. This allows a

remote start module to start the vehicle without activating the system. The

door and trunk zones remain active, and if violated will activate the system

and turn the vehicle’s engine off. If programming, press the Disarm/Unlock

Button for Start Mode or the Unlock/Disarm Button for Disarm. Please note

that the Auxiliary 3rd Channel has standard full-time Start Mode operation.

14. Transmitter Activated Anti-Carjacking: (On / •Off)

- This feature’s operation is explained on pages 21-22.

15. Door Activated Anti-Carjacking: (On / •Off)

- This feature’s operation is explained on pages 21-22.

16. Ignition Activated Anti-Carjacking: (On / •Off)

- This feature’s operation is explained on pages 21-22.

17. Confirmation Chirp: (•On / Off)

- This feature allows the arm and disarm confirmation chirps to be turned off.

Whenthisfeatureisturnedoff,exceptionswillbechirpsduringprogramming

and the single chirp produced when the system arms by Last Door Arming

and Automatic Rearming.

If the System is Activated:

Page 8

System Armed & Activated

Regardless of method, once the system is in a fully armed state it monitors all

protectedzones,andifanintrusionattemptis detected it will activate,or“trigger”.

An activation consists of the following:

• The doors will immediately relock.

• The electronic siren, or optionally the vehicle’s horn, will start sounding.

• The exterior parking lights will flash on and off repeatedly.

over again when the door is closed. “Automatic Rearming” is a separate pro-

grammable operation similar to Last Door Arming, and should not be confused

with it.

Anactivationhasa30(or60)seconddurationunlessthesystemisdisarmedusing

the transmitter or the Valet /Override switch. If all protected zones are secure at

theendoftheactivation,thesystemwillstopandrearmitselftodetectfurtherentry

attempts. If a protected zone is still open at the end of the activation cycle, the

systemwillcontinuetoreactivateitself,foruptosixactivatedcyclesbeforeitresets

itself and ignores the violated zone. If the programmable activated period is 30 Page 25

10. System Activation Cycle Duration: (•30 / 60 Seconds)

- Configures the system’s activation duration cycle to be either 30 seconds or

60 seconds. If programming, press the Transmitter Arm/Lock Button for the

30SecondsettingorpresstheDisarm/UnlockButtonforthe60secondsetting.

11. Double Unlock Pulse: (On / •Off)

- Configures system to change the single unlock output pulse into a double

unlock pulse. Some newer vehicles require a double pulse to unlock the

doors; when needed this feature saves the expense of optional parts.

12. Open Door Bypass Alert: (On / •Off)

- Configures the system to chirp the siren 3 times upon arming, instead of 1

time, to warn the user if a door is still open.

13. Auxiliary 2nd Channel Disarms System or Engages Start Mode: (•Disarms /

Start Mode)

- This unique feature changes certain aspects of the system’s Auxiliary 2nd

Channel’soperationsothatitismorecompatiblewithoptionalremotestarter

units. Whenthisfeatureisutilized,insteadofdisarmingthesystemwhenthe

Auxiliary2ndChannelisactivated,thesystemdoesnotdisarm. Additionally,

certainofthesystem’ssensoryzonesarebypassedtopreventfalseactivation

due to the remote starting operation. When this feature is set for the Start

Page 9

Disarming the System

To Disarm the System: Press & Release the “Disarm/Unlock”

Transmitter Button

seconds, a continuously violated zone will activate the alarm for 3 minutes total

before resetting and ignoring the violated zone. If the programmable activated

periodis60seconds,thetotalactivatedtimeunderthesamecircumstancewould

be 6 minutes. Once the system is activated, it will store a Zone Violation Code,

which is described on page 19.

THE SIREN WILL

CHIRP ONCE THE PARKING LIGHTS

WILL FLASH TWICE

THE DOORS WILL UNLOCK

(IF CONNECTED)

Press &

Release

Upon Disarm: • The siren will chirp twice. (4 chirps if alarm has activated & reset)

• The parking lights will flash twice. (4 times if alarm has activated)

• Upon the first disarming, the parking lights will then illuminate.

• The doors will unlock. (If an optional interface is connected)

• The starter interrupt will disengage.

5. Automatic Rearming: (On / •Off)

- Configures the system to automatically rearm itself 90 seconds after it has

been disarmed by the transmitter.

6. Doors Lock With Automatic Rearm: (On / •Off)

- Adds the automatic locking of the vehicle's doors to the previous feature.

7. Steady Siren Output Or Pulsed Horn Honk Output: (•Siren / Horn)

- Allows the selection of a constant output to sound the electronic siren or a

pulsedoutput to properly sound the vehicle's horn. If programming, press the

TransmitterArm/LockButtonfor the Steady Sirensettingorpress the Disarm/

Unlock Button for the Pulsed Horn setting.

8. Ignition Controlled Door Lock: (•On / Off)

- Configures the system to lock the vehicle's doors when the ignition is turned

on.The following feature controls unlocking, and these features will still

operate when the system is in Valet Mode.

9. Ignition Controlled Door Unlock: (•On / Off)

- Configuresthesystemtounlockthevehicle'sdoorswhentheignitionisturned

off.

Page 24

Page 23

functions in programming mode are noted. Otherwise, pressing the Arm/Lock

Buttonturnsthefeature“on”;pressingtheDisarm/UnlockButtonturnsthefeature

“off”.

• = Default Factory Setting

1. Current Sensing: (•On / Off)

- Enables the system to be activated if armed should the system detect a

voltage spike in the vehicle’s electrical system.

2. Current Sensing Activation Delay: (3 Seconds / •3 Minutes)

- Allowsoptionofalongerdelaybeforeactivationbycurrentsensingcanoccur.

This is for use in vehicles with equipment, such as cooling fans, which stay

on after the ignition has been turned off.

3. Last Door Arming: (On / •Off)

- Configures the system to automatically arm itself 30 seconds after the last

of the vehicle’s doors is closed.

4. Doors Lock With Last Door Arming: (On / •Off)

- Adds the automatic locking of the vehicle's doors to the previous feature.

Page 10

• The LED Status Indicator will turn “Off”, or begin flashing rapidly

if the Automatic Rearming feature is programmed on or flash a

Zone Violation code if the alarm was activated. (page 19)

Safety Disarm: If the system is disarmed while it is activated, it will disarm, but

notunlockthedoors. ThisistheSafetyDisarmfeature;tounlockthedoorsinthis

situation,simplypresstheDisarm/UnlockButtonagain. Shouldthetransmitterbe

lost, damaged, or its batteries be exhausted, the Valet/Override Switch

& your

vehicle’s ignition key

may be used to disarm the system by performing an

Emergency Override, which is explained on page 17.

Should you wish to arm or disarm the system without

the confirmation chirps, simply press and release the

Transmitter Trunk Button twice. Using the Silent Arm/

Disarmoperationsimplyreversesthearmed/disarmed

statusofthesecuritysystem-ifthesystemisdisarmed

when the double Transmitter Trunk Button signal is

received,itarms;shouldthesystembearmedwhenthe

double signal is received, it will disarm.

Silent Arming & Disarming

Press &

Release

Twice

X 2

To Silent Arm / Disarm: Press & Release the Trunk Button Twice

Tabla de contenidos

Otros manuales de Alarma de coche de Omega

Omega

Omega Excalibur AL-1000-EDP Manual de usuario

Omega

Omega AL-100-H Manual de usuario

Omega

Omega Excalibur AL-1510-EDP Manual de usuario

Omega

Omega Excalibur AL-1000SH Manual de usuario

Omega

Omega RS-210-DP Manual de usuario

Omega

Omega Executive 2300 Manual de usuario

Omega

Omega Excalibur ATV-1000 Manual de usuario

Omega

Omega C-4SRS Manual de usuario

Omega

Omega ClassicOne Manual de usuario

Omega

Omega Excalibur AL-1610-EDP Manual de usuario

Omega

Omega Crime Guard 750i5 Manual de usuario

Omega

Omega K9 SUPER MUNDIAL-SS Manual de instrucciones

Omega

Omega Executive 2300atv Manual de usuario

Omega

Omega Excalibur AL-1920-EDP Manual de usuario

Omega

Omega Crime Guard 350i5 Manual de usuario

Omega

Omega Crime Guard 810i6 Manual de usuario

Omega

Omega Echo-2 Guía de inicio rápido

Omega

Omega OL-MDB-ALL Manual de usuario

Omega

Omega Excalibur RS-X70 Manual de usuario

Omega

Omega Excalibur AL-1610-EDP Manual de usuario

Omega

Omega Crime Guard 850i5 Manual de usuario

Omega

Omega Executive model One 1.7rs Manual de usuario

Omega

Omega Excalibur AL-1810-EDP Manual de usuario

Omega

Omega KeyCounter Passive Antitheft System Manual de usuario

Manuales populares de Alarma de coche de otras marcas

Clifford

Clifford 3606X Manual de usuario

Ultra Start

Ultra Start 2500M SERIES Manual de usuario

Ultra Start

Ultra Start 650 Series Manual de usuario

Audiovox

Audiovox Prestige Platinum+ APS-511C Manual de usuario

Sparkrite

Sparkrite SRA8 Manual de usuario

Viper

Viper 4708V Manual de usuario

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Manual

Falcon

Falcon Predator XL3 Guía del usuario

Audiovox

Audiovox Auto Security XR91 Instrucciones de funcionamiento

Clifford

Clifford Sabre II Manual de usuario

CrimeStopper

CrimeStopper CS-8717 Guía de inicio rápido

Ultra Start

Ultra Start 450 SERIES Manual de usuario

Scytek electronic

Scytek electronic Vectra X3 Manual de usuario

Excalibur

Excalibur AL-1860-EDPB Manual de usuario

Clifford

Clifford CYBER 2 Manual de usuario

Gemini

Gemini 7057 Manual de usuario

FlashLogic

FlashLogic FLRSBA PRESTIGE Manual de usuario

Magicar

Magicar FAI-440 Manual de usuario