Omcan FP-IT-0004-VT Manual de usuario
Bowl Cutters
Models FP-IT-0004-VT, 0006-VT, 0009-VT
Items 47261, 47269, 47083
Instruction Manual
Revised - 12/08/2021
Toll Free: 1-800-465-0234
Fax: 905-607-0234
Email: [email protected]
www.omcan.com
2
Page
--------------------------------------------------------------------------- 3 - 4
--------------------------------------------------------------------------- 4 - 6
-------------------------------------------------------------------------- 6
--------------------------------------------------------------------------------------- 6 - 7
--------------------------------------------------------------------------------------------- 8
------------------------------------------------------------------------------------- 8 - 9
---------------------------------------------------------------------------- 10 - 14
---------------------------------------------------------------------------- 15
------------------------------------------------------------------------------------------- 16 - 18
---------------------------------------------------------------------------- 19
Table of Contents
Section
General Information
Safety and Warranty
Technical Specications
Installation
Operation
Maintenance
Parts Breakdown
Electrical Schematics
Notes
Warranty Registration
Model FP-IT-0004-VT / Model FP-IT-0006-VT / Model FP-IT-0009-VT
3
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan
and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone over the age of 18, of
sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct
operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the
machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of
the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has suered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety
instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save
these instructions for future reference. Also save the original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et
Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne
ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de
plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour
utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication
de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine
ou des personnes à proximité de la machine pendant son fonctionnement.
VÉRIFIEZ LE COLIS DÈS RÉCEPTION
Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage
n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés
sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises
manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant
d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager
une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine
doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents
d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli
par un tiers transporteur.
4
General Information
Safety and Warranty
Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations
et les consignes de sécurité.
Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces
instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour
l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba
Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona
inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona
mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido
entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.
Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la
máquina mientras esta en el funcionamiento.
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de
funcionamiento y seguridad.
Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para
salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el
envío del equipo si servicio técnico o devolución de la máquina que se requiere.
GENERAL PRECAUTIONS
• The machine may be used only by trained sta familiar with the safety information given in this manual.
• New sta must be trained in the use of the machine before using it.
• Before cleaning or servicing the machine, disconnect it from its power supply.
• The residual risks must be assessed when servicing or cleaning the machine with the guards removed.
• When servicing or cleaning the machine, concentrate on the job in hand.
5
Safety and Warranty
• Regularly check the condition of the power cable; damaged or worn power cables pose a serious electrical
hazard.
• If the machine appears to be or is malfunctioning, do not use it or try to x it yourself; contact the “Service
Centre” immediately.
• Do not use the machine for frozen products, meat and sh with bones or any nonfood products.
• Do not put your ngers inside the bowl when the machine is working.
• The manufacturer cannot be held responsible in the following cases:
- The machine is tampered by unauthorized personnel.
- Components are replaced with non original spare parts.
- The instructions in this manual are not followed carefully.
- The surfaces of the machine are treated with unsuitable products.
SAFETY EQUIPMENT
MECHANICAL SAFETY EQUIPMENT
As for mechanical safety equipment, the machine described in this manual complies with the UL and CSA
standard. Safety requirements are ensured with the lid which can only be removed if the tank-locking arm is
rotated anti-clockwise on the side of the lid itself.
ELECTRICAL SAFETY EQUIPMENT
As for electrical safety equipment, the machine described in this manual complies with the UL and CSA
standards. The machine is provided with:
• Coded micro-switch which stops the machine if the lid is removed, and prevents the machine from being
restarted until the lid is correctly closed.
• Relay in the command circuit which requires a voluntary restart of the machine after a power blackout.
Even if professional cutters are equipped with electrical and mechanical safety devices (during normal use and
during cleaning and maintenance operations), there are residual risks which cannot be completely eliminated;
these are referred to in this manual with the wording CAUTION. These risks may arise when handling the
blades while loading the machine or during cleaning or sharpening operations of the blades.
NOTE: THESE BOWL CUTTERS ARE NOT IDEAL FOR MAKING LARGE BATCHES OF HUMMUS.
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure
or other damages resulting from installation in non-commercial or residential applications. The right
is reserved to deny shipment for residential usage; if this occurs, you will be notied as soon as
possible.
1 YEAR PARTS AND LABOUR BENCH WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop o to either
an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the
equipment.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
6
Technical Specications
Safety and Warranty
Model FP-IT-0004-VT FP-IT-0006-VT FP-IT-0009-VT
Power 0.8 HP / 600 W 1.6 HP / 1200 W
Bowl Capacity 3.3 L / 3.5 QT 5.3 L / 5.6 QT 9.4 L / 9.9 QT
Bowl lling level 1.5 L / 1.6 QT 3.1 L / 3.3 QT 5.4 L / 5.7 QT
Revolutions 600 - 2800 RPM
Dimensions 18” x 11.7” x 11.8”
457 x 296 x 300mm
18” x 12” x 14.3”
457 x 305 x 362mm
22” x 13.7” x 16.5”
560 x 348 x 420mm
Weight 29.8 lbs. / 13.5 kgs. 32 lbs. / 14.5 kgs. 50.7 lbs. / 23 kgs.
Packaging Dimensions 11.8” x 19.9” x 14.6”
300 x 505 x 370mm
11.8” x 19.9” x 16.9”
300 x 505 x 430mm
14.4” x 23.6” x 19.1”
365 x 600 x 485mm
Packaging Weight 35.3 lbs. / 16 kgs. 37.5 lbs. / 17 kgs. 57.3 lbs. / 26 kgs.
Item Number 47261 47269 47083
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classied as normal solid urban waste and can therefore be disposed of
without diculty.
In any case, for suitable recycling, we suggest disposing of the products separately (dierentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
Installation
SHIPPING
The machines are carefully packed before shipping. The consignment is composed of:
• Robust cardboard external box with internal supports .
• The machine.
• The spatula.
• Blade sharpening plate.
• This manual.
7
Installation
CHECKS ON DELIVERY
When you receive the package containing the machine, carefully check the packaging for signs of damage
during shipping. If the packaging shows signs of mishandling, impacts or dropping, report the damage to the
shipping agent within three days of the date of delivery indicated on the documents and draw up a detailed
report on any damage to the product.
DISPOSING OF PACKAGING
The packaging materials (cardboard box, plastic strap and polyurethane foam) can be disposed of as normal
domestic waste; there is no diculty in disposing of them. If the machine is installed in a country in which
special regulations apply, dispose of the material in a regulatory manner.
POSITIONING
Place the product on a solid surface following the surface dimensions indicated in the technical specications;
the surface must be smooth, non-slippery, dry, robust and solid and it must be placed at a height of 80 cm
above the ground. Furthermore, the cutter must be placed in an environment with a max. non-saline humidity
of 75% and a temperature between +5°C and +35°C; and, in any case, in an environment which does not lead
to any machine malfunctions.
ELECTRICAL CONNECTION
The machine has a power cable with a cross section of 3x1.5 mm², a length of 2.5 m and a NEMA plug.
Connect the machine to a 120 or 230 Volt 60 Hz power supply. Check that the earth system functions perfectly
and make sure the connection is provided with a thermo-magnetic 0.03A circuit breaker. Also check that
the information on the machine’s nameplate matches the specications given in the delivery and shipping
documents, and that both the master switch and cable are easily accessible while the machine is in use.
PRELIMINARY CHECK
Check the integrity and correct position of all the components of the cutter before any operation. Then check
the correct functioning of all its components. Proceed as follows:
1. Press the ON button and the OFF button.
2. Verify that the machine stops if the tank-locking arm is rotated anti-clockwise.
3. Verify that the revolution speed increases and decreases by rotating the SPEED knob clockwise and anti-
clockwise.
4. Press the PULSE button with brief pulses.
8
Operation
Maintenance
CONTROLS
The commands are placed on the body of the cutter. These include the ON button, the OFF button, the PULSE
button and the SPEED knob to regulate the speed. Use the ON button to switch the machine on, and OFF
to switch the machine o, rotate the speed knob clockwise to increase the revolutions and anti-clockwise to
reduce them. Press the PULSE command for the pulse functioning of the machine.
LOADING
CAUTION! Food must only be loaded into the tank when the motor is not running and with the speed
knob at minimum.
Proceed as follows:
1. Rotate the arm in a clockwise direction until the lid can be removed.
2. CAUTION!! Put the product inside the tank, paying attention not to touch the blades with your hands; if very
large pieces of food are used, dice them into small pieces manually before putting them inside the tank.
CAUTION!! Do not ll the tank more than 1/2 full.
3. Avoid direct contact with the machine during use.
4. Put the lid back and rotate the arm to the closing position.
5. Do not use the cutter at low speed for prolonged periods of time.
6. Add any additional food during the process by removing the cover on the lid.
7. At the end of the process, set the speed knob to minimum and then stop the machine.
8. The machine is provided with a device which switches it o after 30 seconds of use at minimum speed. The
device is used to preserve the machine and stop the motor from overheating. If you use the machine at low
speed, allow the machine to rest for at least 30 seconds.
CLEANING
CAUTION! Before performing any cleaning operations you must set the speed knob to minimum and
disconnect the power plug from the mains to completely isolate the machine from the rest of the
system.
GENERAL INFORMATION
• The machine needs to be cleaned at least once a day, or if necessary, more frequently.
• The machine must be washed with neutral detergents at room temperature, using a soft cloth.
• The machine must be cleaned carefully in all its parts, especially those that come into contact with food.
• Do not use pressurised water cleaners or jets of pressurised water to clean the machine.
• Do not use tools, brushes or anything that may damage the machine’s surfaces.
• Do not clean the cutter in a dishwasher.
• Make sure that no residual liquids can get inside the cutter and compromise its functioning and increase
9
Maintenance
electroshock risks.
• After cleaning, carefully dry all parts part of the cutter and put them back together again.
CLEANING THE LID, BLADE HOLDER AND TANK
Rotate the closing arm to remove the lid. You can now easily remove the blade holder and tank by pulling them
upwards. Once the parts have been removed, clean them with water and neutral detergents.
CAUTION! Carry out these operations with protective gloves on.
MAINTENANCE
CAUTION! Before servicing the product, disconnect its power plug from the mains to isolate the
product completely from the rest of the system.
POWER CABLE
Check the condition of the cable regularly and call the SERVICE CENTRE if it needs replacing.
BELT
The belt does not need adjusting; generally it needs to be replaced after 3/4 years, in that case, contact the
“SERVICE CENTRE”.
FEET
The feet may deteriorate or lose elasticity, thus reducing stability of the cutter. Replace them contacting the
“SERVICE CENTRE”.
KNIVES
Check the condition of the blade, after many sharpenings it must not reduce more than 5mm. For replacement,
contact the “ASSISTANCE CENTER”.
CAUTION! For any anomaly/malfunction, contact the “SERVICE CENTRE”, any operation carried out
by unauthorized personnel may compromise the correct functioning of the machine and invalidate the
warranty.
BLADE SHARPENING
CAUTION!! Blades need to be sharpened if you notice a reduction in cutting performance.
Proceed as follows:
1. Rotate the lever in a clockwise direction to the position in which you can remove the lid.
2. Remove the blade holder
3. Take the sharpening stone provided, and while being very CAREFUL, pass it uniformly over the cutting side
of the blades towards the outside until the blade is sharpened.
10
Parts Breakdown
Model FP-IT-0004-VT 47261
Model FP-IT-0006-VT 47269
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Cortador de Omcan
Omcan
Omcan FP-IT-0004 Manual de usuario
Omcan
Omcan FP-CN-0178 Manual de usuario
Omcan
Omcan GR-IT-1000-C Manual de usuario
Omcan
Omcan 24242 Manual de usuario
Omcan
Omcan HLC300 Manual de usuario
Omcan
Omcan FP-CN-0185 Manual de usuario
Omcan
Omcan FP-IT-0003 Manual de usuario
Omcan
Omcan GR-IT-0373 Manual de usuario
Omcan
Omcan FP-IT-0009 Manual de usuario
Manuales populares de Cortador de otras marcas
Milwaukee
Milwaukee HEAVY DUTY M12 FCOT Manual de usuario
Makita
Makita DCS552 Manual de usuario
SignWarehouse.com
SignWarehouse.com Bobcat BA-60 Manual de usuario
Makita
Makita 4112HS Manual de usuario
GEISMAR STUMEC
GEISMAR STUMEC MTZ 350S Manual de usuario
Hitachi
Hitachi CM 4SB2 Guía de solución de problemas
