Olivetti d-COLOR MF222plus Manual de usuario
E-1
INSTALLATION MANUAL
d-Color MF 552 plus/d-Color MF 452 plus/
d-Color MF 362 plus/d-Color MF 282 plus/d-Color MF 222 plus
<Important>
Be sure to correctly follow the procedures in order as explained in this Installation Manual.
If you do not follow the procedure in order, the image trouble may occur.
©Olivetti S.p.A
I. Outline of installation procedures (d-Color MF 552 plus/d-Color MF 452 plus)
When installing the machine and associated options as a system, follow the order shown on the upper.
Caution:
• For the detailed installation procedures for each
option, follow the instructions given in the corre-
sponding installation manual and perform the
procedures correctly. (Optional devices must be
installed after completing the main unit installa-
tion.)
• Once the Power Switch is turned ON, do not
turn OFF it until the installation work has been
completed.
• When placing the machine on the floor, make
sure to use the paper feed cabinet to secure the
performance and the quality of the product.
• Lifting the machine in an awkward position or
transporting it in a poorly balanced position
could result in personal injury. When transport-
ing the machine, assign an adequate number of
persons to the job and ensure that each person
can take a good position of not being exces-
sively loaded.
(mass: approx. 101 kg (222-11/16 lb))
AU-102 WT-506
AU-201*2
SP-501
PC-110
OT-506
Machine
PC-210
MK-730
FS-534FS-533PK-519
MK-734
KH-102
PC-410
TK-101
AU-201*1
MK-735
HT-509
ZU-606*4
FS-535*4
JS-506
LU-204
LU-301
PK-520
SD-511
JS-602*4
PI-505*4
PK-521*4
SD-512*4
UK-204*3
Electronic system options
EK-606*3 EK-607*3
SC-508*3
FK-511
VI-506
IC-414
✱Electronic system options
*1: When installing the AU-201 with MK-735
*2: When installing the AU-201 without MK-735
*3: No particular order in installation procedures.
*4: Unable to be installed in d-Color MF 452 plus.
UK-208*3
KP-101
A2XKIXC001DA
Applied Machines: d-Color MF 552 plus/d-Color MF 452 plus/d-Color MF 362 plus/
d-Color MF 282 plus/d-Color MF 222 plus
Y115290-3 Installation ManualY115290-3 Installation Manual
E-2
Outline of installation procedures (d-Color MF 362 plus/d-Color MF 282 plus/d-Color MF 222 plus)
When installing the machine and associated options as a system, follow the order shown on the upper.
Caution:
• For the detailed installation procedures for each
option, follow the instructions given in the corre-
sponding installation manual and perform the
procedures correctly. (Optional devices must be
installed after completing the main unit installa-
tion.)
• When placing the machine on the floor, make
sure to use the paper feed cabinet to secure the
performance and the quality of the product.
• To use this machine, install the dual scan docu-
ment feeder, the reverse automatic document
feeder, or the original cover.
Even if you do not install the original cover, be
sure to install the hinge covers supplied with
the original cover.
• Once the Power Switch is turned ON, do not
turn OFF it until the installation work has been
completed.
• Lifting the machine in an awkward position or
transporting it in a poorly balanced position
could result in personal injury. When transport-
ing the machine, assign an adequate number of
persons to the job and ensure that each person
can take a good position of not being exces-
sively loaded.
(mass: approx. 85 kg (187-3/8 lb))
*1: When installing the AU-201 with MK-735
*2: When installing the AU-201 without MK-735
*3: No particular order in installation procedures.
*4: No installation is required when DF-701 is loaded.
*5: Unable to be installed in d-Color MF 222 plus.
UK-204*3
PC-110
JS-506
Machine
PC-210
SP-501 OC-511DF-701
PK-520
SD-511
MK-730
AU-102
FS-534
Electronic system options
FS-533
PK-519
MK-735
EK-606*3 EK-607*3
UK-208*3
SC-508
VI-506*5
IC-414*5
PC-410
MK-734
HT-509
WT-506
AU-201*2
DF-624
AU-201*1
KH-102
✱Electronic system options
KP-101
FK-511
UK-209*4
A161IXC001DA
Installation Manual Y115290-3
E-3
II. Installation space (unit: mm (inch))
d-Color MF 552 plus + PC-210 + ZU-606 + FS-535
+ LU-204
d-Color MF 362 plus + DF-701 + PC-210 + FS-534
+ MK-730
III. Pre-installation check items
1. Select a level and stable place for installing the
machine.
2. Be sure to use a power source of the voltage and
frequency indicated in the product specifications.
Ensure that the current carrying capacity of the
power outlet is at least equal to the current listed
in the product specifications.
3. Power the machine directly from a dedicated
power outlet. (Do not use an extension cord.)
4. Do not plug or unplug the power cord with wet or
dirty hands, otherwise you may get an electric
shock.
5. Avoid a hot and humid environment, or a place
exposed to direct sunlight.
6. Avoid a dusty location, or a place near volatile
and flammable substances.
7. Avoid a poorly ventilated place.
IV. Notes on using touch panel
Be sure to instruct users on the following points.
• This machine uses a capacitive touch panel.
When you touch the touch panel, use your fin-
ger or the stylus pen supplied with the machine.
If you touch the panel using your nail or a pen
tip instead of using your finger or the stylus pen,
the touch panel does not respond normally.
• Pressing the touch panel hard may cause dam-
age.
• Do not strongly press the panel or press it using
the sharp tip of mechanical pencils.
• The key is a finger tapping (quick light touch
using a finger) operation.
A5AYIXC001DA
1217
(47-15/16) 480
(18-7/8)
2763
(108-3/4)
1066
(41-15/16)
1246
(49-1/16)
428
(16-7/8) 818
(32-3/16)
1568
(61-3/4)
386
(15-3/16)
936
(36-7/8)
246
(9-11/16)
A5C1IXC011DA
937
(36-7/8) 225
(8-7/8)
1822
(71-3/4)
660
(26)
1246
(49-1/16)
428
(16-7/8) 818
(32-3/16)
1568
(61-3/4)
386
(15-3/16)
936
(36-7/8)
246
(9-11/16)
Y115290-3 Installation Manual
E-4
V. Accessory parts
*1
d-Color MF 552 plus/d-Color MF 452 plus: One
d-Color MF 362 plus/d-Color MF 282 plus/d-Color
MF 222 plus: Two
*2
d-Color MF 362 plus/d-Color MF 282 plus/d-Color
MF 222 plus only
*3
d-Color MF 552 plus/d-Color MF 452 plus only
Note:
The parts shown below are used when installing
options. Keep them safe.
• Paper size label: Large capacity unit (LU-301)
(d-Color MF 552 plus/d-Color MF 452 plus only)
• Label (Super G3 label): Fax kit
Note:
This manual provides the illustrations of the accessory
parts and machine that may be slightly different in
shape from yours. In that case, instead of the illustra-
tions, use the appearance of your machine to follow
the installation procedure. This does not cause any
significant change or problem with the procedure.
No. Name Q’ty
1. User’s guide holder 1
2. Installation manual 1 set
3. Paper size label 1
4. Label (Legal restrictions on copying) 1
5. Label (Super G3 label) 1
6. Cap A (Black) 2
7. Cap B (White) 2
8. Power cord 1
9. Power cord instruction 1
10. Cord clamp*1 1 or 2
11. Connector cover 1
12. Screw A *2 1
13. Screw B 1
14. Screw C
1
15. Chart *3 1
16. Spacer 1
17. Stylus pen 1
18. Waste toner box 1
9738
9646
A161IXC061DA
After unpacking, be sure to get rid of the
packaging materials and keep them out of
the reach of children.
Putting the head in the plastic bag
involves danger of suffocation.
Installation Manual Y115290-3
E-5
VI. Removing the machine
1. Unpack and remove the machine package.
2. Remove the machine, holding it by the locations
on the left side and the handles on the right side
as shown in the illustration and keeping it level.
Caution:
Machine mass
d-Color MF 552 plus/d-Color MF 452 plus: approx.
101 kg/222-11/16 lb
d-Color MF 362 plus/d-Color MF 282 plus/d-Color
MF 222 plus: approx. 85 kg/187-3/8 lb
• Make available collective manpower of an
appropriate size for transporting the machine.
• Before attaching the machine to the paper feed
cabinet, make sure that the supplied connector
cover is not attached.
• When attaching the machine, as the reference
fit the machine with the corner A and B of the
paper feed cabinet.
VII. Removing protective tape, packing
and other shipping materials
1. Remove the protective tape and the protective
materials.
Note:
After removing protective tape A, be sure to push
the area indicated by the “ ” mark to lock the
guide. (d-Color MF 552 plus/d-Color MF 452 plus
only)
When holding the transportation handles,
be careful not to catch your fingers in the
machine.
A2XKIXC003DA
A2XKIXE034DA
A
B
Connector cover
A5AYIXC003DA
A5AYIXC002DA
<d-Color MF 552 plus/d-Color MF 452 plus>
A
Y115290-3 Installation Manual
E-6
2. Open the right door and remove the protective
sheet and packaging materials.
Note:
After removing the packaging materials, make
sure that the transfer roller assy is secured in
place. In the case of <NG>, press the transfer
roller assy into place so that it is secured as shown
in <OK>.
3. Remove the locking screws.
4. Remove the protective sheets.
A5C1IXC001DA
A5C1IXC003DA
A5C1IXC002DA
B
A5C1IXE012DA
<d-Color MF 362 plus/d-Color MF 282 plus/
d-Color MF 222 plus>
<Viewed from point B>
A161IXC005DB
< OK > < NG >
A2XKIXC008DA
A2XKIXC009DA
Installation Manual Y115290-3
E-7
5. Slide out the tray 1 and remove the protective
tape from the inside of the tray.
6. Slide out the tray 2 and remove the tray locking
materials.
7. Remove the protective tapes from the inside of
the tray 2 and remove accessory parts.
8. <d-Color MF 552 plus/d-Color MF 452 plus>
Open the lower front door.
<d-Color MF 362 plus/d-Color MF 282 plus/d-
Color MF 222 plus>
Open the front door.
A5C1IXC005DA
A161IXC009DA
A5AYIXC004DA
A2XKIXC010DA
A161IXC015DB
Y115290-3 Installation Manual
E-8
9. <d-Color MF 552 plus/d-Color MF 452 plus>
Remove the protective tape.
<d-Color MF 362 plus/d-Color MF 282 plus/d-
Color MF 222 plus>
Remove the protective tape and protective mate-
rial.
10. Remove the protective tape from the drum units
and developing units.
Note:
Do not remove the tape A in this procedure.
11. Remove the protective materials from the four
places.
Note:
Keep the protective materials. It is necessary for
transporting the machine.
12. Release the lever of the drum unit (K).
13. Slightly slide the drum unit (K) out and remove
the protective tape
A2XKIXC011DA
Protective tape
A161IXC010DC
Protective tape
Protective material
A5AYIXC005DA
A
A2XKIXC013DA
A2XKIXC014DA
A2XKIXC015DA
Installation Manual Y115290-3
E-9
14. Slide the drum unit (K) into the machine.
15. Lock the drum unit (K) with the lever.
16. Install the supplied waste toner box.
Note:
Push the areas indicated by the “ ” marks to set
the waste toner box to the machine
* Perform the following steps 17 to 19 only when
installing d-Color MF 552 plus/d-Color MF 452
plus.
17. Close the lower front door.
18. Open the upper front door.
19. Remove the protective tape and protective
material.
VIII. Installing the toner cartridge
Note:
Since cartridge is not supplied with the machine,
purchase toner cartridge (of different colors) sepa-
rately.
1. Shake the toner cartridge up and down and left to
right 5 to 10 times respectively.
Note:
Shake the cartridge adequately. Otherwise, it may
cause trouble.
2. Insert the toner cartridge into the machine.
Note:
• Make sure that the color is same between
inserting port and the toner cartridge.
• Make sure that the blue label position of the
toner cartridge is matched with the one of the
machine side.
A2XKIXC016DA
A2XKIXC031DA
Protective tape/
Protective material
A0EDIXC020DA
A2XKIXC017DA
Y115290-3 Installation Manual
E-10
3. Push the toner cartridge all the way in and rotate
it clockwise to lock it.
Note:
Make sure that the toner cartridge is pushed all the
way in.
4. Using the same procedure, install the toner car-
tridges for other colors of toner.
5. <d-Color MF 552 plus/d-Color MF 452 plus>
Close the upper front door.
<d-Color MF 362 plus/d-Color MF 282 plus/d-
Color MF 222 plus>
Close the front door.
IX. Mounting the accessory parts
1. Attach the supplied caps A and B.
2. Remove the protective cover from the supplied
stylus pen.
Note:
Discard the removed protective cover.
3. Set the stylus pen in the place shown in the illus-
tration.
4. Attach the supplied cord clamp to the scanner
rear cover of the machine. (One supplied screw
A)
Note:
Only d-Color MF 362 plus/d-Color MF 282 plus/d-
Color MF 222 plus needs this step.
5. Attach the supplied connector cover to the
machine. (One supplied screw B)
A2XKIXC018DA
A2XKIXC019DA
A2X0IXC068DA
A5C1IXC007DA
A161IXE047DA
A161IXE065DA
Installation Manual Y115290-3
Otros manuales para d-COLOR MF222plus
1
Tabla de contenidos
Otros manuales de Copiador de Olivetti
Olivetti
Olivetti d-Color MF280 Manual de usuario
Olivetti
Olivetti d-Copia 200D Manual de usuario
Olivetti
Olivetti d-ColorMF659 Manual de usuario
Olivetti
Olivetti d-Color MF369 Manual de usuario
Olivetti
Olivetti d-copia 200MF Guía de configuración
Olivetti
Olivetti d-Copia 120 Guía de configuración
Olivetti
Olivetti Copia 9910 Manual de usuario
Olivetti
Olivetti d-COPIA 3500MF Manual de servicio
Olivetti
Olivetti AR-DU3 Manual de usuario
Olivetti
Olivetti d-Copia 2000 Manual de usuario
Olivetti
Olivetti DP-700 Manual de usuario
Olivetti
Olivetti d-Copia 4003MF Manual de usuario
Olivetti
Olivetti d-Copia 201D Guía de configuración
Olivetti
Olivetti d-Copia 16 Manual de usuario
Olivetti
Olivetti d-Color MF364 Manual de usuario
Olivetti
Olivetti DF-650 Manual de usuario
Olivetti
Olivetti d-Copia 2200MF Manual de usuario
Olivetti
Olivetti AR-NC7 Manual de usuario
Olivetti
Olivetti DP-670 Manual de usuario
Olivetti
Olivetti d-Copia 3003MF Manual de usuario
