Oki OJ2010 Manual de usuario
Chapter 1
Introduction
The printer is a general purpose color ink-jet printer that provides high quality text and graphics
printing. The printer can print on single sheet paper, envelopes, labels, index cards, and
transparencies.
Your printer combines the power and ease-of-use of Microsoft®WindowsTM with a compact printer.
This combination allows you to change printer settings and track the progress of your print job from
your computer screen.
This
Users Guide
describes the setup and operation of your printer.
OJ2010 ( 96-02-07 )
Select a Location for the Printer
Place the printer on a flat, stable surface near your workstation. Leave enough space above the
printer to allow for easy paper loading. Also, leave enough space to extend the paper exit tray.
Do not place the printer:
In direct sunlight
Near heat sources or air conditioners
In dusty or dirty environments
OJ2010 ( 96-02-07 )
Unpack the Printer
Remove the printer and all accessories from the packing carton. Save the carton and packing
materials in case you need to repack the printer.
Remove the print cartridges packed inside the printer, behind the paper load door.
Make sure you have the following items:
Printer
Power cord
Printer setup diskette(s)
Paper support
Black print cartridge
Color print cartridge
If any items are missing, broken, or damaged, contact your dealer.
OJ2010 ( 96-02-07 )
Begin Printer Setup
Follow the steps in this chapter to set up your printer. Then complete the steps in Chapter 2 ( )
to install the printer software on your personal computer.
Do not install the print cartridges in your printer until you are instructed during the
installation of the printer software in Chapter 2 ( ).
OJ2010 ( 96-02-07 )
Install the Paper Support
Place the bottom edge of the paper support onto the back of the printer and push
forward until it clicks into place.
OJ2010 ( 96-02-07 )
Connect the Printer and Computer
You need a parallel printer interface cable,
no longer than 6 feet
, capable of supporting
bidirectional communications to connect the printer to your computer. This cable is not supplied
with the printer.
Your printer should not be powered on or plugged in yet.
1) At the back of the printer, plug in the parallel interface cable.
2) Fasten the metal clips to the parallel interface cable.
If your parallel cable has a grounding wire, it is not necessary to attach it to the printer.
3) Refer to the instruction manuals that came with your computer to connect the other end of
the parallel interface cable to your computer.
OJ2010 ( 96-02-07 )
Plug in the Printer
1) Plug the printer power cord into the power socket on the back of the printer.
2) Plug the printer power cord into an electrical outlet.
3) Press the power switch to turn the printer on.
The power light comes on.
OJ2010 ( 96-02-07 )
Load Paper
You can use most high-quality papers with your OKI
JET
2010
printer. For the best results when printing
with color, use coated paper.
You'll find detailed paper guidelines in the printer software on-line Help.
Depending on the thickness of your paper, the sheet feeder can hold up to 150 sheets.
1) At the front of the printer, open the paper load door.
2) Squeeze and hold the left paper guide release lever and move the left paper guide
edge to the correct paper size indicator.
Do not move the right paper guide
.
3) Place the paper in the sheet feeder behind the guides.
Depending on the thickness of the paper, the sheet feeder will hold a
maximum of 150 sheets: do not overload it!
- Do not force the paper under the feeder rollers.
- If the paper has a preferred print side, insert it facing you.
OJ2010 ( 96-02-07 )
- Load letterhead stationery with the letter-head side facing you and
the top of the page pointed down.
4) Close the paper load door.
OJ2010 ( 96-02-07 )
Extend the Paper Exit Tray
1) Gently pull the tray toward you until it stops.
2) Flip the tray extension out.
The paper exit tray is designed for use with paper shorter than 11.7 inches
(297 mm). When you print on paper longer than 11.7 inches (297 mm), close
the paper exit tray.
Now install the printer software: see page 11 ( ).
Note: During
the installation of the printer software you will be prompted to
install the print cartridges.
OJ2010 ( 96-02-07 )
Tabla de contenidos
Otros manuales de Impresora de Oki
Oki
Oki OKIPAGE 8c Plus Manual de usuario
Oki
Oki OKIPOS 80 Plus III Manual de usuario
Oki
Oki B411d Guía de inicio rápido
Oki
Oki OKIPAGE 8W Manual de usuario
Oki
Oki MPS6150c Instrucciones de funcionamiento y mantenimiento
Oki
Oki C710 Manual de usuario
Oki
Oki ML6300FB-SC Manual de usuario
Oki
Oki C9600hnColorSignage Manual de usuario
Oki
Oki ML8810 Manual de usuario
Oki
Oki Microline 320 Turbo D1 Manual de usuario
Oki
Oki ES6410 Manual de usuario
Oki
Oki C5400 Series Manual de usuario
Oki
Oki ES2426dn Actualización de firmware
Oki
Oki C941dn Instrucciones de funcionamiento y mantenimiento
Oki
Oki MPS9650c Instrucciones de funcionamiento y mantenimiento
Oki
Oki C3600n Manual de usuario
Oki
Oki B6250 Series Manual de usuario
Oki
Oki ES3037 Manual de servicio
Oki
Oki C9600hnColorSignage Manual de usuario
Oki
Oki C9200 Manual de usuario
