Oki C9000 Series Manual de usuario
USER’S GUIDE
C9800 MFP/C9800 GA MFP
C9800
C9000
C9800 MFP User’s Guide> 2
P
REFACE
Every effort has been made to ensure that the information in this document is
complete, accurate, and up-to-date. OKI Printing Solutions assumes no
responsibility for the results of errors beyond its control. OKI Printing Solutions also
cannot guarantee that changes in software and equipment made by other
manufacturers and referred to in this guide will not affect the applicability of the
information in it. Mention of software products manufactured by other companies
does not necessarily constitute endorsement by OKI Printing Solutions.
While all reasonable efforts have been made to make this document as accurate and
helpful as possible, we make no warranty of any kind, expressed or implied, as to
the accuracy or completeness of the information contained herein.
The most up-to-date drivers and manuals are available from the Oki web site:
http://www.okiprintingsolutions.com
Copyright © 2005 OKI Printing Solutions
Oki, OKI Printing Solutions and Microline are registered trademarks of Oki Electric
Industry Company, Ltd.
ENERGY STAR is a trademark of the United States Environmental Protection Agency.
Microsoft, MS-DOS and Windows are registered trademarks of Microsoft
Corporation.
Other product names and brand names are registered trademarks or trademarks of
their proprietors.
As an ENERGY STAR Program Participant, the manufacturer has
determined that this product meets the ENERGY STAR guidelines
for energy efficiency.
This product complies with the requirements of the Council
Directives 89/336/EEC (EMC), 73/23/EEC (LVD) and 1999/5/EC
(R&TTE), as amended where applicable, on the approximation of
the laws of the member states relating to Electromagnetic
Compatibility, Low Voltage and Radio & Telecommunications
Terminal Equipment.
This product is equipped with the following embedded RFID read/write system:
Product name : Embedded RFID Read/Write System
Model number : RX4004A
The label on the RFID unit contains the following information:
Oki Data Corporation
Model number : RX4004A
Serial number :
Complies with IDA Standards DB100707
C9800 MFP User’s Guide> 3
N
OTES
,
CAUTIONS
AND
WARNINGS
!
NOTE
A note provides additional information to supplement the main
text.
S
AFETY
WARNINGS
This product has been carefully designed to give years of safe,
reliable performance. As with all electrical equipment, however,
there are a few basic precautions that should be taken to avoid
injury or damage, therefore please be careful to read and
understand the safety warnings on the following pages before
operating the product.
CAUTION!
A caution provides additional information which, if
ignored, may result in equipment malfunction or
damage.
WARNING!
A warning provides additional information which, if
ignored, may result in a risk of personal injury.
C9800 MFP User’s Guide> 4
WARNING!
Ensure all warning and instruction labels on
this product are read, understood and followed
in order to prevent any risk of injury.
Ensure this and all other documentation is both
read carefully and retained for future
reference.
This product may be heavy. Please check the
weight of this product and take all necessary
precautions to prevent any risk of personnel
injury.
This product must be placed on a flat solid
surface strong enough to support its weight to
prevent any risk of injury.
Ensure that there is adequate ventilation all
around this product to prevent overheating and
any risk of fire.
E
C9800 MFP User’s Guide> 5
WARNING!
Keep this product away from direct heat
sources such as radiators and out of direct
sunlight to prevent any risk of overheating.
The power supply required for this product is
220 - 240 VAC, 50/60 Hz. Refer to your
product's rating label for full power rating
details. Ensure that you have a suitable power
supply before connecting the product. If in
doubt contact your dealer or check with your
local power provider.
Ensure both the product and mains power
switches are in the OFF position before
connecting the AC power cable.
This product has an earthed plug as a safety
feature and will only connect to an earthed
socket. Do not attempt to defeat the earthing
or there is a risk of fire or shock.
C9800 MFP User’s Guide> 6
WARNING!
If using an extension cable or power strip
ensure that the total current rating (amperes)
of all connected equipment is less than the
maximum rating of the extension cable, power
strip or wall outlet. Otherwise fire or shock
may occur.
If this product is already supplied with a fitted
power strip then NO additional power strip or
extension cable should be used to connect to
the mains wall outlet.
Ensure the power cable is routed so as not to
be damaged or cause a trip hazard. If the cable
becomes frayed or damaged, replace it
immediately to prevent any risk of shock.
Do not twist, constrict or knot the power cable
as this can cause overheating which may lead
to fire or electric shock.
Ensure the power socket to which this product
is connected is easily accessible at all times.
Do not connect or disconnect the power plug
with a wet hand as this may cause electric
shock.
C9800 MFP User’s Guide> 7
WARNING!
Always hold the power plug to connect/
disconnect the power cable to/from the mains
socket. Unplugging by pulling on the cable can
cause fraying and may lead to fire or electric
shock.
Use only the power cable and power strip
supplied. Using a power cable or power strip
not intended for this product may lead to fire or
electric shock.
To avoid risk of fire and electric shock, do not
use the power cable or power strip supplied
with this product for any other electrical
equipment.
If you do not connect the power cord or any
other cables only as directed in the User's
Guide, this may result in a fire.
Ensure loose clothing and hair are kept clear of
moving parts when this product is in operation
to prevent possible risk of injury.
It is recommended that this product is
switched off prior to opening any covers.
When this product's cover is open, do not touch
the fuser unit or print head as you may receive
burns. Allow them to cool before touching.
C9800 MFP User’s Guide> 8
WARNING!
If this product's casing gets extremely hot or
smoke, unusual smells or abnormal noises are
emitted from this product, there is a risk of fire.
Unplug the mains connector and contact your
dealer.
If this product has been knocked over or
damaged, there is a risk of electric shock, fire
and/or injury. Unplug the mains connector and
contact your dealer.
If any liquid (for example water) is allowed to
enter this product, there is a risk of fire. Unplug
the mains connector and contact your dealer.
Do not place containers containing liquid on
this product as electric shock, fire and/or
injuries may occur.
If any foreign objects (for example clips) are
allowed to enter this product, there is a risk of
electric shock, fire and/or injury. Unplug the
mains connector before removing the object.
Do not introduce foreign objects into the
ventilation holes or operate this product with
covers open or removed as electric shock, fire
and/or injuries may occur.
C9800 MFP User’s Guide> 9
WARNING!
Do not use an extremely flammable spray near
this product as the product contains high
temperature parts that may cause a fire.
Switch this product off before cleaning to
prevent any risk of injury. Clean using a damp
cloth. Do not use liquid or aerosol cleaners.
Do not carry out any operations on this product
that are not specified in the User's Guide. This
may result in electric shock, fire and/or injury.
Do not touch the battery if one is fitted to the
product. There is a risk of explosion if the
battery is replaced by an incorrect type. The
product battery should not require replacement
during the life of the printer.
After installing additional memory, hard disk
drive or any other internally fitted option, any
covers removed or doors opened must be
closed or replaced and secured to prevent any
risk of fire or electric shock.
C9800 MFP User’s Guide> 10
WARNING!
If items such as scanners or finishers are fitted,
please exercise care when moving these items
so as to avoid risk of entrapment or personnel
injury.
If this product is installed on a cabinet or high
capacity feeder, ensure wheel locks are applied
once it is placed in final position for use, to
prevent risk of movement or injury.
Take care with toner powder. If swallowed,
induce vomiting and seek medical attention.
Never attempt to induce vomiting if person is
unconscious.
Take care with toner powder. If inhaled, move
the person to an open area for fresh air. Seek
medical attention.
Take care with toner powder. If it gets into the
eyes, flush with large amounts of water for at
least 15 minutes keeping eyelids open. Seek
medical attention.
Take care with toner powder. Spillages should
be treated with cold water and soap to help
reduce risk of staining skin or clothing.
Otros manuales para C9000 Series
3
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Impresora todo en uno de Oki
Oki
Oki CX1145 Manual de usuario
Oki
Oki MC560n Manual de usuario
Oki
Oki MC360 MFP Guía de configuración
Oki
Oki MC560 Manual de usuario
Oki
Oki MC560 MFP CX2032 Guía de inicio rápido
Oki
Oki OKIOFFICE87 Manual de usuario
Oki
Oki B2520 MFP Manual de usuario
Oki
Oki MC561MFP Manual de usuario
Oki
Oki MB492dn Manual de usuario
Oki
Oki C5510n MFP Manual de usuario
Oki
Oki OKIOFFICE 87 Manual de usuario
Oki
Oki MB441MFP Manual de usuario
Oki
Oki MB260 MFP Manual del propietario
Oki
Oki ES3640eMFP Manual de usuario
Oki
Oki ES9476 MFP Manual de usuario
Oki
Oki C5550 MFP Manual de usuario
Oki
Oki MB472dn Manual de usuario
Oki
Oki MB441MFP Instrucciones originales
Oki
Oki MB760 Manual de usuario
Oki
Oki CX2033MFP Manual de usuario
Manuales populares de Impresora todo en uno de otras marcas
Triumph Adler
Triumph Adler DC 2016 Manual
Epson
Epson WorkForce WF-2510 Guía del usuario
Epson
Epson Stylus Scan 2000 Manual de instalación y operación
Epson
Epson PictureMate Snap PM 240 Manual de instrucciones
Konica Minolta
Konica Minolta bizhub C35 Manual de usuario
Brother
Brother MFC-J430w Manual de usuario
