Oki C9000 Series Guía de configuración
PRINTING GUIDE
C9600n/C9600dn/C9600hdn/C9600hdtn
C9600
C9000
2
P
REFACE
Every effort has been made to ensure that the information in this document
is complete, accurate, and up-to-date. OKI assumes no responsibility for the
results of errors beyond its control. OKI also cannot guarantee that changes
in software and equipment made by other manufacturers and referred to in
this guide will not affect the applicability of the information in it. Mention of
software products manufactured by other companies does not necessarily
constitute endorsement by OKI.
While all reasonable efforts have been made to make this document as
accurate and helpful as possible, we make no warranty of any kind,
expressed or implied, as to the accuracy or completeness of the information
contained herein.
The most up-to-date drivers and manuals are available from the OKI Printing
Solutions website:
http://www.okiprintingsolutions.com
Copyright © 2005. All rights reserved.
OKI and OKI Printing Solutions are registered trademarks of OKI Electric
Industry Company, Ltd.
Energy Star is a trademark of the United States Environmental Protection
Agency.
Hewlett-Packard, HP, and LaserJet are registered trademarks of Hewlett-
Packard Company.
Microsoft, MS-DOS and Windows are registered trademarks of Microsoft
Corporation.
Apple, Macintosh, Mac and Mac OS are registered trademarks of Apple
Computer.
Adobe and PostScript are registered trademarks of Adobe Systems.
Other product names and brand names are registered trademarks or
trademarks of their proprietors.
3
C
ONTENTS
Chapter 1: Introduction .........................................................5
About this book ....................................................5
How to access the driver screens ............................6
Windows drivers...............................................6
PCL saved driver settings...................................8
Setting the driver device options.............................9
Windows .........................................................9
Mac OS9 .........................................................9
Mac OS X in Classic Mode ................................ 11
Mac OS X ...................................................... 11
Chapter 2: Blacks and greys ................................................ 13
Black overprint ................................................... 13
Black printing (black generation) .......................... 15
Composite black............................................. 15
True (pure) black ........................................... 15
Fine lines enhancement ....................................... 19
Greyscale printing............................................... 20
Chapter 3: Colour matching ................................................. 25
Basics ............................................................... 25
What this guide describes .................................... 26
Printer colour management .................................. 27
Introduction................................................... 27
About RGB and CMYK colour ............................ 28
Office colour....................................................... 29
Office colour - RGB options .............................. 30
Customising RGB office colour
with the colour correct utility (Windows) .......... 35
Graphic pro........................................................ 36
Types of ICC profile supported ......................... 37
Graphic pro workflow – overview ...................... 38
Matching the colour of
a monitor, scanner or camera......................... 41
Simulating another printer – RGB source
data............................................................ 48
CMYK ink simulations – CMYK source data ......... 56
Rendering intents ........................................... 62
Pure black text / graphics ................................ 63
Colour match precision.................................... 63
Printer driver settings for
ICC profile creation or no colour matching........ 64
4
Chapter 4: Finishing options................................................. 67
Booklet printing (imposition) ................................ 68
Collating............................................................ 71
Colour separation ............................................... 75
Separating queued print jobs................................ 78
Windows separator page ................................. 78
Mac OS 9 cover page ...................................... 79
Mac OS X cover page ...................................... 79
Cover print ........................................................ 80
Custom page size ............................................... 82
Duplex (double-sided) printing ............................. 88
Mac OS X ...................................................... 91
Printing multiple pages on one sheet (N-up) ........... 92
Poster printing.................................................... 95
Scale to page ..................................................... 96
Watermarks ....................................................... 97
Chapter 5: Secure printing................................................. 101
Sending the document....................................... 102
Windows ..................................................... 102
Mac OS 9 .................................................... 103
Printing the document ....................................... 104
Deleting a secure print document........................ 105
Chapter 6: Store to hard disk ............................................. 107
Sending the document....................................... 108
Printing the document ....................................... 108
Deleting a stored document ............................... 108
Index ............................................................................... 109
About this book 5
C
HAPTER
1: I
NTRODUCTION
A
BOUT
THIS
BOOK
This book is delivered as an Adobe Acrobat PDF file. It provides a
convenient on-screen reference to the many features of the
driver software supplied with your C9600.
There are many cross-references within this book, each
highlighted as blue text. When you click on a cross-reference
within Adobe Acrobat or Adobe Reader (also supplied on the
Manuals CD) the display will instantly jump to the part of the
manual containing the referenced material.
By using the button in Adobe Reader, you can navigate directly
back to where you were before.
If you need to print a part of this manual, use Adobe Reader’s
print command, and choose which pages you want to print. Some
pages are deliberately left blank so that the page format is
appropriate for duplex (double-sided) printing if you wish.
6 How to access the driver screens
H
OW
TO
ACCESS
THE
DRIVER
SCREENS
Most of the features described are accessed via the printer driver
screens. How you access them depends on your computer and its
operating system.
W
INDOWS
DRIVERS
The driver windows are tabbed dialogue boxes, offering a wide
range choices about how you want to print your documents.
There are two ways to access the driver features from within
Windows:
1. Directly from the Windows “Printers” folder (“Printers and
Faxes” folder in Windows XP).
If you choose this method any changes you make will
become the driver defaults. This means they will remain
active for all your applications unless you specifically
change them from within the application’s Print dialogue.
2. From your application’s Print dialogue.
If you choose this method any changes you make will
usually only last for as long as the particular application is
running, or until you change them again. In most cases,
once you quit the application the driver defaults will return.
IMPORTANT!
Settings made from the printer’s own control panel are
the printer defaults. They determine how your printer
will behave unless you specify otherwise from your
computer.
The driver defaults override the printer defaults.
Application Print settings override both the printer
defaults and the driver defaults.
How to access the driver screens 7
C
HANGING
THE
DRIVER
DEFAULTS
Windows XP/2000/Server 2003
1. Click [Start] →[Settings] →[Printers and Faxes] to open
the Printers and Faxes window.
2. In the Printers and Faxes window, right-click on the
appropriate printer driver icon, and choose [Printing
Preferences] from the context menu.
Windows 98/Me/NT
1. Click [Start] →[Settings] →[Printers] to open the
Printers window.
2. In the Printers window, right-click on the appropriate
printer driver icon, and choose [Properties] from the
context menu.
C
HANGING
THE
APPLICATION
’
S
DRIVER
SETTINGS
Windows
1. In your application, open the file you want to print.
2. On the [File] menu, choose [Print…].
3. In the application’s Print dialogue, make sure the printer
shown is the appropriate one, and click [Properties].
Macintosh
The Mac user interface is very different to that in Windows. In
particular, OS X differs considerably from previous versions. Full
instructions are therefore included with each procedure.
8 How to access the driver screens
PCL
SAVED
DRIVER
SETTINGS
This feature, unique to the Windows PCL drivers, allows you to
save the printer driver settings and reuse them later. This could
be useful if you frequently print many different types of
document that require different printer driver settings.
Recalling saved settings in the PCL drivers is a simple task that
must be done first, before any job-specific changes are made.
Rather than repeat the procedure throughout this manual, it is
described here.
S
AVING
A
SET
OF
DRIVER
SETTINGS
1. Make any changes to the driver settings you want, as
described in the relevant section of this manual.
2. In the driver’s [Setup] tab, click [Save…].
3. Enter a meaningful name for the settings you are saving,
and click [OK].
R
ECALLING
SAVED
DRIVER
SETTINGS
1. In the driver’s [Setup] tab, choose any previously saved
[driver settings] you need.
2. Proceed to make any other adjustments for this job, as
described in the relevant section in this manual.
Setting the driver device options 9
S
ETTING
THE
DRIVER
DEVICE
OPTIONS
This section explains how to ensure that your printer driver can
utilize all of the hardware features installed in your printer.
Accessories such as hard disk, duplex unit (two sided printing),
additional paper trays, etc., will only be usable if the printer
driver on your computer knows they are there.
In some cases the hardware configuration of your printer is
automatically detected when the driver is installed. However, it is
advisable to at least check whether all of the available hardware
features are listed in the driver.
This procedure is essential if you subsequently add extra
hardware features to your printer after the drivers have been
installed and set up.
W
INDOWS
1. Access the driver’s [Properties] window. (See “Changing
the driver defaults” on page 7.)
2. Select the [Device Options] tab.
In the Windows XP PostScript driver the tab may be called
“Device Settings”.
3. Set the options for any devices you have installed,
including the correct number of paper trays, high capacity
feeder, duplex unit, etc.
4. Click [OK] to close the window and save your changes.
M
AC
OS9
There are 2 methods to configure printer hardware options,
depending on whether or not you use Desktop Printing:
> Use the desktop printer icon if you use desktop printing;
or…
> Use the Chooser if you do not use desktop printing and
print via AppleTalk.
10 Setting the driver device options
C
ONFIGURING
HARDWARE
OPTIONS
FROM
THE
DESKTOP
Use this method if you have a printer icon on your desktop.
1. Select the printer icon on the Desktop for your printer.
2. From the [Printing] menu, choose [Change Setup…].
3. In the [Change] menu, select the hardware item(s) that
you have installed, and change the [To] values as
appropriate.
Tip—If your printer is connected via USB or AppleTalk, click
the [Auto Setup] button. This queries the printer, and sets
the options automatically.
4. Click [OK] to save your settings.
C
ONFIGURING
HARDWARE
OPTIONS
FROM
CHOOSER
(A
PPLE
T
ALK
ONLY
)
Use this method if you do not use Deskop Printing.
1. In the Apple menu, select [Chooser].
2. Select the printer driver that you use (LaserWriter or
AdobePS) in the left-hand side of the Chooser window.
3. If you are on a network with multiple AppleTalk zones,
select the appropriate zone for the printer in the bottom
left side of the Chooser.
If your network does not have multiple AppleTalk zones,
this option will not be visible.
4. Select the name of your printer in the right-hand side of
the Chooser.
5. Click [Setup…].
6. Click [Configure].
7. Make changes to the installed hardware options as
appropriate for your printer.
Otros manuales para C9000 Series
3
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Impresora todo en uno de Oki
Oki
Oki MB460MFP Manual de usuario
Oki
Oki LUCIDIOM EQ-9800 Manual de usuario
Oki
Oki C9800hdn Manual de lista de piezas
Oki
Oki C3530 Manual de usuario
Oki
Oki C9800 GA Manual de usuario
Oki
Oki CX 1145 MFP Manual del propietario
Oki
Oki MB460MFP Manual de usuario
Oki
Oki MC860 MFP Manual de usuario
Oki
Oki B491d Manual de usuario
Oki
Oki FAX 5780 Manual de usuario
Oki
Oki MB780 Manual de usuario
Oki
Oki CX3641 MFP Manual de usuario
Oki
Oki C5550n MFP Manual de capacitación
Oki
Oki CX3641 MFP Manual de usuario
Oki
Oki MB290 MFP Manual de capacitación
Oki
Oki ES7480DFN Manual de usuario
Oki
Oki CX3641 Manual de usuario
Oki
Oki OF5650 Manual de usuario
Oki
Oki CX2731MFP Manual de usuario
Oki
Oki OKIFAX 740 Manual de usuario
Manuales populares de Impresora todo en uno de otras marcas
Triumph Adler
Triumph Adler DC 2016 Manual
Epson
Epson WorkForce WF-2510 Guía del usuario
Epson
Epson Stylus Scan 2000 Manual de instalación y operación
Epson
Epson PictureMate Snap PM 240 Manual de instrucciones
Konica Minolta
Konica Minolta bizhub C35 Manual de usuario
Brother
Brother MFC-J430w Manual de usuario
