OHAUS SD Manual de usuario

Quick Start Guide SD Scales

Ohaus Corporation www.ohaus.com iSD Shipping Scales Quick Start Guide

PREPARATION FOR USE

Battery Installation:

Open battery cover on bottom of

the Indicator. Install three LR14

(“C”) batteries (not included).

Orient batteries as shown on

inside cover. Close battery cover.

AC Adapter Installation:

Check that local line voltage

matches voltage printed on the AC

adapter label. Then connect the

scale to the power supply.

Mount Indicator as desired.

…with or without brackets.

Options below:

120mm / 4.72˝

90mm / 3.54˝

SELECTING THE LOCATION:

Place on a firm, steady surface.

Avoid excessive air current, vibrations, heat

sources, or rapid temperature changes.

Use leveling feet to level the base.

SAFETY PRECAUTIONS

•Before plugging in the indicator, verify that local power supply matches voltage printed

on AC adapter. (Use only the adapter provided.)

•Disconnect the indicator from the power supply when cleaning.

•Do not operate this product in hazardous or unstable environments.

•Do not drop loads on the platform.

•Operate the product only under ambient conditions specified in the Instruction Manual.

•Service should be performed by authorized personnel only.

SD Scales Quick Start Guide

SD Shipping Scales Quick Start Guide ii Ohaus Corporation www.ohaus.com

CONTROLS

Button Functions

UNITS

Cal

Short Press

Long Press

Changes weighing unit and weighing mode.

In Dynamic Weighing Mode, starts countdown.

Starts calibration.

ON/ZERO

Off

Short Press (when off)

Short Press:(when on)

Long Press

Turns scale on.

If balance is on, sets display to zero.

Turns scale off.

OPERATION

Power Up Test: Press ON/ZERO Off.All display segments appear, then the software version.

Display resets to zero.

Zero Function: Press ON/ZERO Off when scale is on, display returns to zero.

When adding additional mass, press ON/ZERO Off repeatedly to scale’s full capacity.

With a container, press ON/ZERO Off to Tare. Add mass to see NET weight. If both sample

and container are removed, a negative value will be displayed. Press ON/ZERO Off to Zero.

Overload: If load exceeds scale capacity, “E” appears. Remove load, scale returns to normal.

Auto Shut-Off: When running on batteries, scale turns off after four inactive minutes.

Dynamic Weighing

With platform empty, press UNITS Cal until bullet • flashes.

Place a mass on the platform. The scale shows “-A-”.

(If using a container, press ON/ZERO Off to tare and return to zero.

Short-press UNITS Cal to start the averaging countdown from 5 seconds.

Averaged weight appears. Bullet • stops flashing when process is complete.

Display holds until a button is pressed.

To repeat process, press UNITS Cal with a mass on platform or container.

To Exit, remove mass from platform or container. Press UNITS Cal.

*80253132*

P/N 80253132

Stability

symbol

Battery charge

symbol

Symbols for weighing

modes:

lb – Pounds

•

– Dynamic Weighing

kg – Kilograms

Negative

symbol

Tabla de contenidos

Otros manuales de Escala de OHAUS

OHAUS

OHAUS A32P3T series Manual de usuario

OHAUS

OHAUS Valor 1000 Manual de usuario

OHAUS

OHAUS Catapult 1000 Manual de usuario

OHAUS

OHAUS YA102 Gold Manual de usuario

OHAUS

OHAUS Adventurer Pro AV811 Series Manual de usuario

OHAUS

OHAUS PX Series Manual de usuario

OHAUS

OHAUS TAJ Carat TAJ203 Manual de usuario

OHAUS

OHAUS Valor 1500 Series Manual de usuario

OHAUS

OHAUS Valor 1000 Manual de usuario

OHAUS

OHAUS TAJ Series Manual de usuario

OHAUS

OHAUS SHRK07AL1 Manual de usuario

OHAUS

OHAUS VE1500P Manual de usuario

OHAUS

OHAUS 5000 Manual de usuario

OHAUS

OHAUS ES series Manual de usuario

OHAUS

OHAUS AS20 Manual de usuario

OHAUS

OHAUS DEFENDER SERIES Manual de usuario

OHAUS

OHAUS Scout SKX Manual de usuario

OHAUS

OHAUS Pioneer PJX Series Manual de usuario

OHAUS

OHAUS Adventurer Pro Manual de uso y cuidado

OHAUS

OHAUS Compass CX Series Manual de usuario

OHAUS

OHAUS DIAL-O-GRA 310 Manual de usuario

OHAUS

OHAUS DS Series Manual de usuario

OHAUS

OHAUS ANALYTICAL Plus Series Manual de usuario

OHAUS

OHAUS Ranger RD Manual de usuario

Manuales populares de Escala de otras marcas

AWS

AWS ZEO-50 Manual de usuario

Gima

Gima Glass Body Fat Analyzer Manual de lista de piezas

Seca

Seca 374 Manual de usuario

TEC

TEC TEC SL59 SERIES Manual de usuario

Axis

Axis B/E Series Manual de usuario

Alecto

Alecto ACW-40 Manual de usuario

Rice Lake

Rice Lake MSI-4260 IS Manual de usuario

IKA

IKA RCT basic safety control Manual de usuario

ADE

ADE M20011 Manual de usuario

Duronic

Duronic KS3000 Manual de usuario

Digi

Digi SM-720 Manual de usuario

Cardinal

Cardinal CS Series Manual de usuario

Korona

Korona Kastella Manual de usuario

A&D

A&D FC-50Ki Manual de usuario

BDA

BDA CAMARGUE Manual de usuario

Tanita

Tanita HD-357 Manual de usuario

Leifheit

Leifheit 03173 Manual de usuario

Lumme

Lumme LU-1340 Manual de usuario