OHAUS MB90 Manual de usuario

Quick Start Guide MB90/MB120

Ohaus Corporation www.ohaus.com i MB90/120 Moisture Analyzers Quick Start Guide

ASSEMBLY

CONTROLS

Turns On or Off display and fan.

When pressed, sends Print command.

When pressed, either starts or stops the

drying process.

When pressed, performs Tare function.

Leveling indicator

Leveling

Feet

Used to level the Moisture Analyzer.

MAKING A SIMPLE MEASUREMENT

Use one of the included absorbent glass fiber pads as a sample to become familiar with the instrument and the

various displays.

If the display is not visible and the unit is plugged into a power source, press

the On/Off button.

Directly start a measurement.

Open the cover on the Moisture Analyzer.

Clean the pan.

Place the pan handle in the sample chamber. Ensure that the tongue of the

pan handle fits exactly in the slot of the draft shield element.

Place the empty sample pan and glass fiber pan in the pan handle. The

sample pan must lie flat in the pan handle.

Note: It is advisable for you to work with the pan handle at all times. The pan

handle is ergonomic, safe and provides protection against possible burns due

to a hot sample pan.

Close the cover. This sets the Moisture Analyzer to zero automatically.

Open the cover on the Moisture Analyzer.

Wet the glass fiber pan with a 0.5 to 1 gram of water.

Note: Minimum sample size must be greater than 0.5 gram.

Starting the test

Close the cover, the Moisture Analyzer starts the drying and measurement

process automatically.

Tray Pan

Leveling

Feet

Leveling

Indicator

Draft Shield

Pan Support

Pan Handle

Sample Pan

MB90/MB120 Quick Start Guide

MB90/120 Moisture Analyzers Quick Start Guide ii Ohaus Corporation www.ohaus.com

Drying and measurement

You are now able to follow the progress of the drying cycle on the display.

This first display comes up automatically when the test was started.

Observing the test progress

There are five displays available when the Moisture Analyzer is running a test.

(Showing %MC, %DC, g, %RG or a curve. )

When pressing the data area while %MC is shown, the display will cycle

through each of the five displays.

The display indicates the Method Name, Temperature/Time, actual

temperature, elapsed time duration of the test, moisture and curve.

The test automatically stops at the end of the measurement.

If you want to end the test sooner, press the button.

Congratulations! You have just performed your first measurement with your

moisture analyzer.

Carefully remove the sample pan handle from the drying area.

WARNING: As the pan and sample may still be

hot, you should let these cool down before

removing the pan from the pan handle!

Edit default method

The analyzer comes with a default method preinstalled. The settings of the default method are shown on the display.

To edit the settings, press on the area where the settings are displayed.

MB90 Moisture Analyzer interface

MB120 Moisture Analyzer interface

MB120 moisture analyzer features

SmartGuideTM function. It can

automatically generate suitable

test method for your samples.

To use it, Click

on the top right corner of the

interface.

Press the setting items to edit them.

Please see the instruction manual for more details.

*30241177* P/N 30241177F

MB120 Instruction Manual:

http://dmx.ohaus.com/WorkArea/showcontent.aspx?id= 4294974363

MB90 Instruction Manual:

http://dmx.ohaus.com/WorkArea/showcontent.aspx?id= 4294974528

For the full instruction manual, please scan the QR code

or click the link below:

MB120 Manual MB90 Manual

Otros manuales para MB90

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de OHAUS

OHAUS

OHAUS T31P Manual de usuario

OHAUS

OHAUS CKW-55 Manual de usuario

OHAUS

OHAUS TD52 Manual de usuario

OHAUS

OHAUS Ranger 3000 Series Manual de usuario

OHAUS

OHAUS ST20C-A Manual de usuario

OHAUS

OHAUS MC2000 Manual de usuario

OHAUS

OHAUS Defender 5000 TD52XW Manual de usuario

OHAUS

OHAUS TD52 Manual de usuario

OHAUS

OHAUS STARTER 3100C Manual de usuario

OHAUS

OHAUS ST Series Manual de usuario

OHAUS

OHAUS STARTER 300C Manual de usuario

OHAUS

OHAUS MB27 Manual de usuario

OHAUS

OHAUS MB90 Manual de usuario

OHAUS

OHAUS MB35 Manual de usuario

OHAUS

OHAUS STARTER 2100 Manual de usuario

OHAUS

OHAUS TD52P Manual de usuario

OHAUS

OHAUS ST3100M-B Manual de usuario

OHAUS

OHAUS TD32PE Manual de usuario

OHAUS

OHAUS STARTER 3100C Manual de usuario

OHAUS

OHAUS MC2000 Manual de usuario

OHAUS

OHAUS ST20M Series Manual de usuario

OHAUS

OHAUS i-DT33XW Manual de usuario

OHAUS

OHAUS STARTER 3100M Manual de usuario

OHAUS

OHAUS TD52 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario