Odyssey INFINITY NX Manual de usuario
LIVE STREAMING VIDEO DRONE
FOR AGES
+
INSTRUCTION & REFERENCE MANUAL • Model no. ODY-1715
14
Thank you for your purchase of the Infinity NX Live
Streaming Video Drone. You’re just moments away
from creating stunning aerial acrobatics!
Product/spare parts included in this packaging
Please read this manual carefully before use and retain it for future reference.
Safety guidelines
● This product is not a toy. It is not appropriate for children under 14 years old.
● Please read this instruction manual carefully before operating the product
according to the manual.
● The manufacturer and dealers disclaim all responsibility for damage caused by misuse.
● Keep the small accessories away from children to avoid choking accidents.
● Keep batteries away from fire or other high-temperature environments.
● When flying the model, keep it at least 1~2 meters away from the user or others to
avoid injury due to collision.
● Do not modify the product; modification may cause malfunction or accident.
● Fly the model within your line of sight to control it safely.
● Children require adult supervision when using this product.
● Remove rechargeable batteries before charging them.
● Recharge rechargeable batteries only under adult supervision.
● Remove exhausted batteries from the controller.
● Do not short circuit the supply terminals.
● The USB charger to be used with the product should be regularly examined for
potential hazards, such as damage to the cable or cord, plug, and
other parts. In the event of such damage, the product must not be used.
WHAT’S IN THE BOX
x1
x1
x1
x4
x1
Infinity NX Drone Unit
2.4 Ghz Radio Transmitter
USB Charger
X-Guard Propeller Pieces
Propeller Changer
x1
x1
x1
x4
x1
Rechargeable LiPo Battery
Smartphone Holder
USB Charger
X-Guard Propeller Pieces
Propeller Changer
2
The Drone Unit
Major parts of the Drone
Orientation Confirmation
Propeller
Protecting
Guard Motor
Camera
Head of the
model
Propeller A
(Clockwise Motor)
Propeller B
(Counter Clockwise
Motor)
Power on the model and make sure that the propellers are installed in the right
position. Propeller A at the left-front and the right-rear corner should spin clockwise.
Propeller B at the right-front and the left-rear corner should spin counterclockwise.
Propeller B
(Counter Clockwise
Motor)
Left Right
Propeller A
(Clockwise Motor)
Tail of the
model
3
Smartphone App “MJX H”
Introduction to the Control & Functions
4
4. H/L speed
22
22. App control
switch
21
21. One key start
20
20. One key Unlock
18
18. One key landing
15
15. 3D visual effects
11
11. Waypoints
16
16. File play
23
23. Return
17
17. WIFI signal of
the drone
3
3. 360° Roll
8
8. Light switch
7
7. Home Beacon
6
6. Smart Fly mode
12
12. Link/Unlink drone
14
14. Video
2
2. 180° screen eversion
1
1. Hide the interface
19
19. Trimmer C
13
13. Trimmer D
24
24. Trimmer B
25
25. Trimmer A
26
26. Left stick
27
27. Right stick
5
5. Gravity control mode
9
9. Mode Switches
10
10. Low-level/
Medium-level
Throttle switch
4
Remote Control
Button & Feature Locations
Installing the Batteries in the Remote Control
Antenna
Power
Indicator
Power Switch
(Speed Setting x3
Low/Med/High)
2nd Push –Auto Takeoff
3rd Push –Auto Landing
One Button Auto Start
1st Push –Auto Start
Switch between Left/Right Turns
or Sideward Flights (Short Press)
Trim A
Turn Left/Right
Trim Setting
Trim B
Strafe Left/Right
Trim Setting
Light Button
Photo Button
Left Control
Stick
Directional Stick
(Press down to enter
SmartFly Mode)
Trim C
(Forward Trim Setting)
Trim D
(Reverse Trim Setting)
Video
Shooting
Manual Flip &
Roll Button
Use a small screwdriver to remove the screw securing the battery cover on the back of the
remote control. Then install 6 x AA batteries (not included) in the orientation shown below.
Then replace the battery cover back on the remote control and put the screw back in.
5
1. Before flying, insert each protecting
guard on the bottom of a rotor housing
as shown and push the guard up
until the clips at its top secure the guard.
2. If you wish to remove the guards for storage,
gently pull apart the clips at the top of each
guard and pull down the base until the guard
is removed.
Connect the battery wire plug with the power
supply wire plug and insert the battery into
the battery compartment.
How to Charge the Drone Battery
Reinstall the Drone Battery
Installing and Removing the Protective Guards
Pic.1
Pic. 2 Pic.3
Disconnect the battery wire plug from
the power supply wire plug . Pull on the
silver foil to remove the battery from the
Drone. Then connect the battery wire
plug with the USB charging cable plug,
and insert the USB interface to any USB
charging outlet to charge the battery.
The USB indicator light illuminates while
charging is proceeding and turns off
once the battery is fully charged. Full
charging time is around 70 minutes.
6
Preparation for Flight
QR Code
iOS
QR Code
Android
WiFi connection instructions*
1. Power on the model. The indicator light will flash rapidly. The model is
in gyro-detection state. Put the Infinity NX drone unit on the ground.
2. Enter your smart phone’s WIFI settings and connect to the WIFI signal
“MJX H ****”. After a successful connection, exit settings.
3. Open the “MJX H” APP on your smart phone and click the logo “MONITOR” to enter
the control interface to watch the real-time video. Or click “CONTROL” to enter
the APP control interface to control the flight with the APP. Touch“ ” when it shows in
RED, which means that your mobile phone has successfully connected with the drone.
When connected, the indicator light on your drone will stay on. Touch “ ” and
the rotor blades will rotate slowly. Then, push up the throttle control stick,
and the drone will take off.
*If you want to use the remote control instead of the mobile device to control your Inifinity,
turn on your remote control and link it to your drone before opening up your MJX app … if
you want to use the smart device only, do not turn on the remote control.
APP Remote control software download
For Android systems, please visit our website www.mjxrc.com to download the
software “MJX H”.
For Apple IOS system, please go to the APP store to download the software “MJX H”.
(Or download either mobile phone APP by scanning the QR code below.)
7
Enter into the APP Control
One key Take-off and Landing
1. After the model is unlocked, by pressing the Power button and then Engine Start, the rotor
blades will rotate slowly; touch “ ” , the model will take off.
2. While the drone is flying, make sure the drone is completely level and then touch “ ”.
The drone will automatically & gently land on the ground. Push the left throttle stick down
once the drone reaches the ground to automatically stop the engine and propeller blades.
Drone Calibration
Pic.4
1.Open the software
“MJX H”
2.Cilck the “CONTROL”
button.
3.Activate the mobile
phone APP real-time
remote control
interface.
Please perform calibration for the first flight or when the flight performance is poor.
Poor flight performance (except vibration created by camera mount) or even
complete failure may result from out-of-date calibration. To calibrate your unit,
whether using the controller or smart phone app:
1. Put the model on the ground or any flat & still surface.
2. Pull down both of the control sticks to the bottom right corner for 2 seconds (Pic .4).
The indicator light of the drone will flash rapidly and then stay on, indicating that
calibration is complete.
Note: Please make sure that the model is put on the ground or any flat & still surface.
If the model inclines, it will bring unsatisfactory altitude-hold performance after
the model takes off.
Note: If you are using the Remote
Control Transmitter, perform the same
operation for Drone Calibration.
8
While the model is flying in Smart Fly mode, touch the icon “ ” again. Once the icon
turns black and the model indicator light turns from flashing to constant illumination,
the drone has exited headless mode.
Emergency Stop
Gravity Sensor (G-Sensor) Control Function
Smart Fly (Headless Mode)
Touch “ ” ; once it turns red, the model is in G-sensor control mode. The drone
movement (turn left, turn right, fly left, fly right, fly forward and backward) will be
controlled by the mobile phone’s accelerometer.
Pic.5
Whether using the controller or the smart phone APP, if you encounter an emergency,
it’s easy to perform an immediate landing. Just pull the left control stick to the left-bottom
corner while pulling the right control stick to the right-bottom corner (Pic.5).
Touch the icon “ ”; once it turns red and the indicator light of the model turns from
constant on to flashing, it means that the model has enter into headless mode.
Enter into Smart Fly mode:
Exit Smart Fly Mode:
Setting Flight direction control in Smart Fly mode:
● When checking the flight direction of the drone, set the model nose straight ahead
and tail facing you. This direction will be constantly considered as “forward”
when forward signal is given from the remote control, no matter where the model
nose is pointing to.
Note: If you are using the Remote
Control Transmitter, perform the same
operation for Emergency Stop.
9
When the model is in headless mode, touch “ ” and the drone will fly back to the pilot.
Press this button again or push the forward/backward control stick to exit the Home
Beacon function.
Home Beacon (One Key Return)
Turn the turning
control stick left, andthe
drone will turn to your
right.
Turn the turning
control stick right, and
the drone will turn to your
left.
Turn the sideward
flight control stick right,
and the drone will fly to
your right.
Turn the sideward
flight control stick left, and
the drone will fly to your
left.
Push down the forward/
backward control stick,
the model will fly backward,
toward you.
Push up the forward/
backward control stick, the
model will fly forward, away
from you.
●When the model is flying in Smart Fly (Headless mode), you should keep facing
the forward direction. Otherwise, the model will be difficult to control.
The model control is shown as below:
Remarks:
●Flight direction proof is needed when the model is going to fly in Smart Fly mode. When
checking on the flight direction, the drone should be set straight ahead with its tail
facing you. You should face the same direction the model nose is pointing.
You should stand in the same orientation when flying the drone.
●When the model is flying in Smart Fly mode, if the flight direction is inconsistent,
land the drone quickly and carry out the flight direction proof action again.
10
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Zumbido de Odyssey
Odyssey
Odyssey STARFALL X ODY-2222 Manual de usuario
Odyssey
Odyssey GALACTIC II Manual de usuario
Odyssey
Odyssey StarChaser ODY-1940WIFI Manual de usuario
Odyssey
Odyssey Spartan Manual de usuario
Odyssey
Odyssey Galaxy Seeker II Manual de usuario
Odyssey
Odyssey Micro X-3 Manual de usuario
Odyssey
Odyssey Build-A-Drone ODY-1228 Manual de usuario
Odyssey
Odyssey ODY-1717NX Manual de usuario
Odyssey
Odyssey STEALTH NX-2 ODY-1765 Manual de usuario
Odyssey
Odyssey StarChaser Manual de usuario
