Octava HDMX42-V1.3 Manual de usuario

Description Specifications

Model HDMX42-V1.3

HDMI Inputs 4

HDMI Outputs 2

Optical Audio Output 1

Version 1.3

IN/Out Connectors 19 pin HDMI female type-A

HDCP HDCP

Display Selection Remote, Manual, Smart Scan,

RS232

Single Link Range 480 P, 720 I/P, 1080 I/P

Video Data Rate 6.75 Gbps

Vertical Frequency Scan Rate 24 / 50 / 60 Hz

Dimension 12.08 x 4.1 x 1.67 inch

(306.9 x 104.2 x 42.3mm)

DC adapter (included) 5VDC, 2.5A

Rackmount capable 1RU, Rack mounts included

Remote control (IR) Infrared, discrete code.

For Questions and support:

Email : [email protected]

URL: www.octavainc.com

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LL.C

All trademarks are the sole property of their respective companies

V 1.3

Deep Color

Installation Guide

Rev. B

Table of contents

1. Application Diagram

2. Description

3. Features

4. Clear EYETM

5. Smart ScanTM

6. Installation

7. Remote Control Guide

8. Configuring Smart ScanTM

9. Short Cuts

10. RS232 Controls

11. EDID Configuration

12. Changing EDID mode

13. 1 RU Rackmount

14. Disabling / Enabling IR Remote Control Receiver

1 RU Rackmount :

The Octava 4x2 HDMI Matrix Switch can be installed in a 1 RU rack by

simply installing the rack mounts included.

Disabling /Enabling Front Panel IR Remote Receiver:

To disable the front panel IR remote receiver-insert the plastic plug into the

IR jack as shown.

IR disabled IR enabled

Application Diagram

Description:

The Octava 4x2 HDMI Matrix Switch allows you display any 4 HD

sources on 2 HD displays! You can create Picture By Picture or even

have the SAME picture on both HD screens for the ultimate in HD

viewing experience and flexibility.

The Octava 4x2 HDMI Matrix is Full 1080P, V1.3 compatible. An

internal digital audio processor processes HDMI audio and converts to

Optical Digital Audio Ouput for integration with your surround sound

audio system.

Our proprietary Clear EYETM transmission line and ISI reduction design

will IMPROVE the digital video signals. Smart ScanTM algorithm

intelligently selects the correct HDMI source so you can enjoy the

program instead of fumbling with the remote.

Features:

Watch ANY 4 HD programs simultaneously on 2 Displays!

V1.3, 1080P.

4 HDMI inputs, 2 HDMI Outputs.

Optical Audio Output for integration with surround sound system.

Works with HDMI or DVI-D, HDCP-enabled HDTV.

Supports high-resolution video 480 P, 720 I/P, 1080 I/P.

Clear EYETM design optimizes HDMI signal transmission.

Smart Scan TM Algorithm intelligently selects the correct input.

Remote Control (IR) included. Discrete Code allows direct channel

control.

External IR Jack for extension.

1RU Rackmount capable.

RS-232 control.

Clear EYETM:

Our proprietary Clear EYETM transmission line and ISI reduction

design will IMPROVE the digital video signals caused by

transmission degradations.

Smart ScanTM:

Octava’s HDMI switch with Smart ScanTM saves you the hassle of

fumbling with multiple remote controls. Simply power on the HDMI

source you want to view and the HDMI switch will automatically

switch to the correct port. If no HDMI sources are on, then the

switch will go into standby mode.

Installation:

1)Connect the Monitor to the HDMI OUT A

2)Connect the second monitor/projector to HDMI OUT B

3)Connect the HDMI sources to the HDMI INPUTS

4)Turn On your HDTV and at least 1 HD source

5)Connect the DC power adapter.

7 Press the “A”

button on the front

panel. LED will

flash for ~2 min

while programming.

Programming

will take ~2

minutes.

LED will flash

while

programming

8 Wait.

Programming is

complete when

LED indicates “1”

9 Set the Program/

LOCK switch #4 to

LOCK Position

( UP)

11 Connect all video

sources and

displays to Matrix

and turn ON

12 Re-power the

Matrix.

3 12

Infrared

Jack

Infrared Detector

Changing EDID mode:

It is recommended to keep the EDID in the factory default

MODE1. If necessary, you may set to different EDID mode by

following these instructions.

Front View

Back View

Step Action Notes

1 Set the Smart Scan switch

to OFF

2 Disconnect all sources

and display from Matrix

3 Set the Progam/Lock

switch #4 to “program

mode” ( down)

4 Set the EDID to the mode

desired.(MODE 2 shown.) See page 10

for other

EDID modes

5 Reset Power to the Matrix

by disconnecting the

power and reconnecting

power.

6 The LED will now indicate

the EDID Mode that you

will program.(mode 2

shown)

LED “2” will

flash.

flashed

Switch

Number 1 2 3 4

Name Smart Scan

Switch EDID

switch EDID

switch Programming/LOCK

switch

Function Enable/disable

Smart Scan EDID

MODE

select

EDID

MODE

select

Programming/LOCK

Down = Smart

Scan Off

Up= Smart Scan

Down= EDID

Programming mode

Up= Locked

LED Indicators

Manual Select

DC Power

Input

HDMI Output

(

To TV

)

HDMI Output

(

To TV

)

HDMI Sources

Optical Audio

Out

EDID & Smart Scan

Switch

RS232

Pressing +/-

Increments/Decrements

to the next available

Source. 5

Remote Control Guide:

Octava’s Remote control uses discrete code so can be easily

integrated with most Universal Remote Controls such as Logitech’s

Harmony.

EDID Configuration:

The Matrix can be configured to 3 EDID settings.

It is recommended to keep the EDID in the default factory mode 1.

Button Function Notes

+, - Increments/Decrements to the next

available Source

1,2,3,4 Selects the corresponding numbered

source.

Turns ON/OFF the LED light.

Turns ON/OFF the HDMI switch

Other Not used

Mode Video Audio Description Switch settings

1 480I,720I/P,

1080I/P PCM,

Bitstream

(Dolby

Digital, DTS)

Default

Mode

2 480I, 720I/P,

1080I/P.

Reads EDID of

all monitors

and sets to :

Video=min.

Resolution of

displays

connected.

PCM, Bitstream

(Dolby Digital,

Dolby Tru

HD,DTS,DTS

Master Audio)

Read EDID

from Monitor

and AV receiver

connected and

set AUDIO to

Maximum

capability.

Parsing/

Read Mode

3 480I,720I/P,

1080I 2 CH PCM Basic Mode

Pressing ON/OFF

Turns On/Off the

HDMI switch

Pressing LED

Turns on/off the

Blue LED light.

Pressing 1-4

Selects the

corresponding

numbered source.

Pressing A-D

Selects the Display

to be controlled.

Input Switch Controls

Note:

<STX> denotes Start of Text (0x2)

<ETX> denotes End of Text (0x3)

Basic Quick Start:

Use the remote control to select the Display that you wish to control

followed by the Input (DVD, Settop) that you wish to watch.

For example:

-Pressing Display B, “2” will switch Input 2 to HDMI Out B.

-To connect DIPLAY A to IN1 and DISPLAY B to IN3 you simply follow

this sequence

Step 1) Display A, 1 (this will set Display A to Input 1)

Step 2) Display B, 3 (this will set Display B to Input 3)

Here are some more examples:

Input ASCII Function Selection

A-1 <STX>211<ETX> Select OUT A to Input port 1

A-2 <STX>212<ETX> Select OUT A to Input port 2

A-3 <STX>213<ETX> Select OUT A to Input port 3

A-4 <STX>214<ETX> Select OUT A to Input port 4

B-1 <STX>221<ETX> Select OUT B to Input port 1

B-2 <STX>222<ETX> Select OUT B to Input port 2

B-3 <STX>223<ETX> Select OUT B to Input port 3

B-4 <STX>224<ETX> Select OUT B to Input port 4

Output Selection

(Step 1) Input Selection

(Step2) Result

DISPLAY A “2” Display A switches to

Input 2

DISPLAY B “1” Display B switches to

Input 1

DISPLAY A “+” Display A increments to

next available Input

DISPLAY B “-” Display B decrements

to next available Input

Configuring Smart ScanTM:

The Smart Scan is disabled before shipment. It is recommended

to leave Smart Scan disabled in most applications.

To enable the Smart ScanTM

1) Set the Configuration switch #1 to the up position.

2) Re-power the matrix.

To disable Smart ScanTM

1) Set the Configuration switch #1 to the down position.

2) Re-power the matrix.

Short Cuts:

The Octava 4x2 HDMI Matrix Switch offers several “short cuts”

with the remote control for the most common scenarios.

Number of HDMI

Sources ON Short Cut How

1 Switch picture between Display A

and B. Press A or B

2 Swap the 2 HD video sources

between Display A and B. Press + or -

3-4 Cycle thru all the HD picture

combinations on the display(s) Press + or

Press -

RS232 Controls:

The Octava HDMI Distribution Amp can be easily integrated

with 3rd Party control systems via RS232 control. The following

shows the control protocol:

Baud rate=9600

Data bits=8

Parity check=None

Stop bits=1

Flow Control=None

Protocol:

<STX>Command to Execute<ETX>

Basic controls

Note

<STX> denotes Start of Text (0x2)

<ETX> denotes End of Text (0x3)

Input ASCII Function Selection

1 <STX>001<ETX> Port Status

2 <STX>2XX<ETX> Source display switching(See Page 9)

3 <STX>003<ETX> Turn ON LED

4 <STX>004<ETX> Turn OFF LED

5 <STX>005<ETX> Turn ON Power

6 <STX>006<ETX> Turn OFF Power

7 <STX>007<ETX> Turn ON Smart Scan

8 <STX>008<ETX> Turn OFF Smart Scan

7 8

Tabla de contenidos

Otros manuales de Conmutador de matriz de Octava

Octava

Octava MVPS-UHD42VC Manual de usuario

Octava

Octava HD4XSTPMX Manual de usuario

Octava

Octava HDMX42 PRO HD HOME Theater Series Manual de usuario

Octava

Octava UHD44MX-IP Manual de usuario

Octava

Octava HDMXA71-V1.3 Manual de usuario

Octava

Octava HD4XSTPMX Manual de usuario

Octava

Octava HDMX44-V1.3 Manual de usuario

Octava

Octava HD42CATMX Manual de usuario

Octava

Octava HDMXA71-V1.3 Manual de usuario

Octava

Octava HDMXA71 Pro HD Home Theater Series Manual de usuario

Octava

Octava HDMXA71 Pro HD Home Theater Series Manual de usuario

Octava

Octava HDMX44-V1.3 Manual de usuario

Octava

Octava 44UHDMX Manual de usuario

Octava

Octava HD4XSTPMX Manual de usuario

Octava

Octava HDMX44-V1.3 Manual de usuario

Octava

Octava HDHC44MX-V1.3 Manual de usuario

Octava

Octava UHD44MXA-IP Manual de usuario

Manuales populares de Conmutador de matriz de otras marcas

Broadcast Tools

Broadcast Tools SS 8.2 Manual de usuario

Altimium

Altimium MATF32 Manual de usuario

ALFAtron

ALFAtron ALF-MUK44N Manual de usuario

Monoprice

Monoprice Blackbird 15377 Manual de usuario

Kramer

Kramer XL 3216VS Manual de usuario

PTN

PTN FMX12 Manual de usuario

CYP

CYP nT15GX01 Manual de usuario

Kramer

Kramer VP-2x2 Manual de usuario

Kramer

Kramer Sierra Video 6432V5xl Manual de usuario

TESmart

TESmart HMA0402A40 Manual de usuario

Intelix

Intelix FLX-88 Instrucciones de funcionamiento

Kramer

Kramer LASSEN XL 3232S Manual de usuario

Roland

Roland XS-1HD Manual de usuario

Kramer

Kramer VS-66HDCPxl Manual de usuario

Atlona

Atlona AT-HDMI-22M Manual de usuario

Link

Link HD8X8 Manual de usuario

AMX

AMX AVS-OP-2020-117 Instrucciones y recetas

Lindy

Lindy 38042 Manual de usuario