Nvidia NVX-E0204D Manual de usuario

NVIDIA Graphic Cards

User’s Guide

Doc No. : NVX-E0204D

in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic,

mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company.

Disclaimer

We makes no representations or warranties, either expressed or implied, with respect to the contents hereof and

specifically disclaims any warranties, merchantability or fitness for any particular purpose. Any software described

in this manual is sold or licensed "as is". Should the programs prove defective following their purchase, the buyer

(and not this company, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair, and any

incidental or consequential damages resulting from any defect in the software. Further, this company reserves the

right to revise this publication and to make changes from time to time in the contents hereof without obligation to

notify any person of such revision or change.

All brands or product names mentioned in this manual are trademarks or registered trademarks of their respective

companies.

FCC Statement

FCC Class B Radio Frequency Interference

Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measure:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/television technician for help.

Notice 1:

The changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

Notice 2:

Shielded interface cables must be used in order to compiliy with the emission limit.

GeForce4 Ti –Ferocious Graphics Power

User’s Guide

The GeForce4 Ti graphics processing unit (GPU) is the first consumer GPU capable of driving complex geometries

and character animations. With its advanced nfiniteFX II Engine, superior Accuview Antialiasing techniques, and

flexible nView display technology, the GeForce4 Ti GPU allow end users to experience radically immersive graphical

environments complete with unique visual effects, and the most realistic, life-like images ever experienced on a

desktop PC.

GeForce4 Ti 4600GeForce4 Ti 4400 GeForce4 Ti 4200

Vertices per Second 136 Million 125 Million 113 Million

Fill Rate ( AA Samples / Sec )4.8 Billion 4.4 Billion 4 Billion

Operations per Second 1.23Trillion 1.12 Trillion 1.03 Trillion

Memory Bandwidth 10.4 GB/Sec. 8,8 GB/Sec. Up to 8 GB/Sec.

Maximum Memory 128 MB 128 MB 128 MB

GeForce4 Ti –Ferocious Graphics Power

User’s Guide

nfiniteFX II Engine

The NVIDIA nfiniteFX II Engine incorporates dual programmable Vertex Shaders, faster Pixel Shaders and 3D

textures. The nfiniteFX II Engine gives developers the freedom to program a virtually infinite number of custom

special effects to create true-to-life characters and environments.

Accuview Antialiasing

The Accuview Antialiasing subsystem with advanced multisampling hardware delivers full-scene antialiased quality

at performance levels never before seen.

Lightspeed Memory Architecture II

LMA II boosts effective memory bandwidth by up to 300%. Radical new technologies?including Z-occlusion culling,

fast Z-clear, and auto pre-charge?effectively multiply the memory bandwidth to ensure fluid frame rates for the

latest 3D and 2D games and applications.

3D Textures

An integral part of the nfiniteFX II and nfiniteFX Engines, 3D textures make hollow objects solid with true

three-dimensional material properties such as wood grain or marbling.

Shadow Buffers

Shadow buffers enable self-shadowing for characters and objects, and soften the edges of shadows for realistic

effects, adding depth to scenes and highlighting spatial relationships between objects.

GeForce4 Ti –Ferocious Graphics Power

User’s Guide

Unified Driver Architecture (UDA)

Guarantees forward and backward compatibility with software drivers. Simplifies upgrading to a new NVIDIA product

because all NVIDIA products work with the same driver software.

Advanced Pixel Shaders

Part of the nfiniteFX II Engine, advanced Pixel Shaders alter lighting and surface effects that replace artificial,

computerized looks with materials and surfaces that mimic reality. Technical advancements deliver substantial

performance improvement in all areas, especially three and four texture performance.

AGP 4X/2X and AGP Texturing Support

Takes advantage of new methods of transferring information more efficiently, and allows content developers to use

high-quality, 32-bit color textures and high-polygon-count scenes.

Dual Vertex Shaders

Part of the nfiniteFX II Engine, dual Vertex Shaders are used to breathe life and personality into complex characters

and environments. By driving more than 100 million processed vertices per second, dual Vertex Shaders make

massively populated scenes rich in detail possible.

Highest Quality and Highest Performance Microsoft Windows XP Support

Fully accelerates Windows XP multimedia and user interfaces, making it the ideal Windows XP graphics solution.

GeForce4 Ti –Ferocious Graphics Power

User’s Guide

Lossless Z-Compression

LMA II contains a lossless form of Z-compression that delivers a 4:1 benefit. Compression is a crucial technique in

saving memory bandwidth for higher performance.

Microsoft DirectX 8.X and OpenGL 1.3 Optimizations and Support

Delivers the best performance and guarantees compatibility with all current and future 3D applications and games.

Quad Cache

LMA II contains a caching system for primitives, vertices, textures and pixels. These caches are individually

dedicated and optimized for almost instant graphics pipeline access and reuse.

World's Fastest DDR Memory Interface

The 10.6GB per second memory subsystem ensures peak performance and the smoothest frame rates ever,

allowing extremely high resolutions and full-scene antialiasing as the standard operating mode for most games.

Z-Correct Bump Mapping

The nfiniteFX II engine is capable of making intersecting bump-mapped polygons look realistic and accurate. This is

especially important in scenes where water and land interact with each other.

Hardware Installation

mmCC

lGraphics Card

lUser’s Guide

lDrivers& UtilitysCD

nnPP

Caution :

Static electricity can severely damage electronic parts, Take these precautions:

lBefore touching any electronic part, drain the static electricity from your body. You can do this by touching

the internal metal frame of your computer while it's unplugged.

lDon't remove a card from the anti-static container until you are ready to install it. When you remove a card

from your computer, place it back in its container.

lDon't let your clothes touch any electronic parts.

lWhen handling a card, hold it by its edges, and avoid touching its circuitry.

Hardware Installation

Before You Begin

Before you process next step, make sure your computer system meets the peripheral requirements and switch to

standard VGA display driver.

Prepare Your Computer for Installation

Prior to working on your computer, make sure the power and any related equipment are turned off.

How to Insert Your AGP Graphics Card?

Hardware Installation

How to Connect the Monitor?

Plug your monitor cable into the monitor connector on your AGP graphics

card. Make sure the other end of the monitor cable is properly connected to

your monitor.

Installation Procedures

For the first time Installation

Locate the AGP bus expansion slot, make sure this slot is unobstructed.

1. Remover the corresponding expansion slot cover from the computer chassis.

2. Ground yourself to an anti-static mat or other grounded source.

3. Position the card directly over the AGP slot and insert one end of the card down into the slot. Be sure the

metal contacts on the bottom of the host adapter are securely seated in the slot.

4. Connect your analog monitor's 15-pin VGA connector to the card and fasten the retaining screws (if any).

5. Connect other cables and devices if available.

Now you are ready to install the software drivers and utilities.

For Systems with existing VGA card

Change your display driver to Standard VGA.

1. Shut down your computer and unplug all electrical cards.

2. Replace the existing VGA card with the new graphics card.

3. Restart your computer and install the new display driver.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Tarjeta de video de Nvidia

Nvidia

Nvidia Inno3D Manual de usuario

Nvidia

Nvidia GeForce GTX 760 Manual de usuario

Nvidia

Nvidia NVIDIA Quadro FX 540 Manual de usuario

Nvidia

Nvidia GEFORCE GT 630 Manual de usuario

Nvidia

Nvidia 3DForce4-MX440 Series Manual de usuario

Nvidia

Nvidia RTX A6000 Manual de usuario

Nvidia

Nvidia Quadro FX 370 Manual de usuario

Nvidia

Nvidia GeForce4 MX Series Manual de usuario

Nvidia

Nvidia GeForce MX Series Manual de usuario

Nvidia

Nvidia GeForce FX 5900 XT Series Manual de usuario

Nvidia

Nvidia GeForce GTX 980 Guía de referencia rápida

Nvidia

Nvidia GeForce 6 series Manual de usuario

Nvidia

Nvidia GeForce MX420 Manual de usuario

Nvidia

Nvidia GRID K1 Manual de usuario

Nvidia

Nvidia 8400 - BFG GeForce GS Manual de instrucciones

Nvidia

Nvidia Quadro K4000 Manual de usuario

Nvidia

Nvidia GeForce 256 Manual de usuario

Nvidia

Nvidia GEFORCE GTX 460 Manual de usuario

Nvidia

Nvidia GEFORCE GTX 560 Ti Manual de usuario

Nvidia

Nvidia Quadro Manual de usuario

Nvidia

Nvidia GEFORCE GTX 550 Ti Manual de usuario

Nvidia

Nvidia Quadro 6000 Manual de usuario

Nvidia

Nvidia 6800 - GeForce GTO PCI 256MB Graphics Card Manual de usuario

Nvidia

Nvidia Quadro K6000 Manual de usuario

Manuales populares de Tarjeta de video de otras marcas

Gainward

Gainward GeForce GTX 690 4GB Manual de usuario

ATI Technologies

ATI Technologies RADEON 137-40225-20 Manual de usuario

MSI

MSI N220GT series Manual de usuario

ATI Technologies

ATI Technologies RADEON 7000 MAC EDITION Manual de usuario

SIIG

SIIG aurora Manual de usuario

ClearSpeed

ClearSpeed ClearSpeed Advance e720 Manual de usuario

MSI

MSI R7850 series Manual de usuario

DVS

DVS Atomix HDMI Manual de usuario

Aztech

Aztech VGS3D-AGP Manual de usuario

Advoli

Advoli TB4 Standard Manual de usuario

ELSA

ELSA ERAZOR III LT Manual de usuario

Gigabyte

Gigabyte GV-R7500L Manual de usuario

Themis

Themis TGA-7000 PMC Manual de usuario

EMS

EMS XtremeRGB-Ex1 Manual de usuario

Pioneer

Pioneer PDA-5003 Manual de usuario

QDI

QDI N2 Manual de usuario

NEC

NEC N8116-48 Manual de usuario

MSI

MSI R7770 PoweR Edition Manual de usuario