FLEXESERVE® | Flexeserve Zone® -Replacing a fan plate | V1 MAR 2021
© 2021 The Alan Nuttall Partnership Ltd
How to guide
Flexeserve Zone®-Replacing a fan plate
NOTE
Ensure that the unit is switched off and disconnected from the power supply when
carrying out this task.
•Insert the
blank off plug
into the fan
plug.
•Screw the fan
plug into
position using
the M3 screws
and a PZ1
screwdriver.
•Plug the fan
cable back
into the
wiring loom.
13
•Ensure that
the safety
earth link is
refitted
before re-
energising the
unit.
17
•Replace all
applicable
back panels,
ensuring that
all M4 fixings
are refitted to
the top rear
back panel.
16
15
14
