Numatic WVP 800 DH Especificaciones

Tabla de contenidos

Otros manuales de Aspiradora de Numatic

Numatic

Numatic Henry HVR 200-A2 Manual de usuario

Numatic

Numatic RSB150 Manual de usuario

Numatic

Numatic HDX.201-12 Manual de usuario

Numatic

Numatic HZ 190 Manual de usuario

Numatic

Numatic WV 1500 Manual de usuario

Numatic

Numatic NaceCare NBV 220 Manual de usuario

Numatic

Numatic PPH 320-12 Manual de usuario

Numatic

Numatic A26A Manual de usuario

Numatic

Numatic Nacecare NVH 380-1 Manual de usuario

Numatic

Numatic NQ.100 Manual de usuario

Numatic

Numatic NS1 Manual de usuario

Numatic

Numatic HZ 570S Manual de usuario

Numatic

Numatic NQS 350B Manual de usuario

Numatic

Numatic PVT 220A Manual de usuario

Numatic

Numatic NBV190NX Manual de usuario

Numatic

Numatic PPR 240-11 Manual de usuario

Numatic

Numatic NV-450 Instrucciones de montaje

Numatic

Numatic Henry HDK.201-12 Manual de usuario

Numatic

Numatic NVQ 370-21 Manual de usuario

Numatic

Numatic PPT 220-B2 Manual de usuario

Numatic

Numatic HVB 170 Henry Manual de usuario

Numatic

Numatic CVC 370 Manual de usuario

Numatic

Numatic AirBo AMS615A Manual de usuario

Numatic

Numatic MFQ 370-21 Manual de usuario

Manuales populares de Aspiradora de otras marcas

Bissell

Bissell LittleGreen Proheat 1425 Series Manual de usuario

Panasonic

Panasonic MC-YL637S147-AE Manual de usuario

NEFF

NEFF N17XH10 0 Series Manual de usuario

LG

LG A9 Series Manual de usuario

Oreck

Oreck Cordless Captura BK51700 Series Manual de usuario

Kogan

Kogan KAVACROBVWA Manual de usuario

Kränzle

Kränzle VENTOS 50 ID Guía del usuario

EVVO

EVVO Ai35 Manual de usuario

DeWalt

DeWalt DWH200D Manual de usuario

Pontec

Pontec Pondomatic Vacuum Cleaner Manual de usuario

Cleanmaxx

Cleanmaxx PC-P007E Manual de usuario

Exido

Exido 240-114 Manual de usuario

RIDGID

RIDGID WD1685AU0 Manual de usuario

Ezviz

Ezviz RE4P Manual de usuario

STG global

STG global TANVAC HDV3000 Manual de usuario

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Manual de usuario

Factory

Factory M3340 Manual de usuario

Shop-Vac

Shop-Vac VN92 SERIES Manual de usuario

WVP 800 DH Operator Instructions

1) Once model no WVP 800 DH has been removed from its packaging, lay all

components next to main unit to ensure the following accessories have been included.

1 x WVP 800 DH

1 x 4mtr discharge hose

4 x 76mm locking castors

1 x 2.5 mtr vacuum hose/bend assembly

4 x 32mm plastic extension tubes

1 x wet pick up nozzle

1 x nozzle cleaner with slide on brush

Setting up the vacuum

2) Connect 2.5 mtr hose/bend assembly to hose inlet fitted on the front of the drum

assembly.

3) Connect 4 x 32mm plastic extension tubes together and then fit into 32mm plastic

bend fitted to the end of the hose.

4) Fit wet pick up nozzle onto the end of the 32mm extension tube.

5) Connect 4 mtr discharge hose (screw fitting) to rear of drum assembly.

6) Fully uncoil discharge hose and place into a suitable drainage system which must be

lower than the vacuum to work effectively.

7) Move vacuum unit into position, ensuring that is placed on level ground. Push down

the locking mechanism on each castor to secure the unit in place.

8) Ensure that power switch on the vacuum unit is switched off before plugging the

mains lead into a suitable mains power outlet. You may wish to connect the vacuum to an

R.C.D (rated at 30 Milli Amps) before connecting to a power supply.

9) Turn on vacuum switch.

10) Lower extension tubes and wet pick up nozzle into pond.

11) The Vacuum will start to suck up the liquid/debris and when full will automatically

empty the contents via the discharge hose. The quantities of water/waste can be adjusted

by adjusting the auxiliary air inlet on the plastic bend. Please note that the vacuum switch

will need to be turned off before further vacuuming commences.

12) Sometimes sediment may settle in the bottom of the drum assembly, this can easily

be rectified by flushing the unit through with clean water.

Cleaning Sides of pond

13) Remove wet pick up nozzle and extension tubes from hose assembly.

14) Connect slide on brush onto nozzle cleaner to the end of the curved wand section,

or if you are working at a greater depth add 1 or more straight wand sections.

15) Ensure slide valve is fully open on wand section, turn on vacuum and place into

the pond, and scrub pond sides to remove algae and grime.

Things to remember before using the vacuum

•This vacuum is intended only for the use of cleaning/ maintenance of Fish ponds.

•The vacuum must always be secured in place using the 4 x locking castors and on

level ground.

•The vacuum must not be used with extension leads greater than 10 metres.

•The vacuum should not be used for the removal of Hazardous or Volatile

substances.

•Do not allow children near the pond when using the vacuum or let them use the

machine.

•Never use this machine in or around the pond unless you have a Residual

Current Device Fitted (R.C.D)

•The manufacturer of this appliance cannot accept responsibility for loss of stock

or damage to ponds while using this machine.

12.03.07