Nuga NM-200 Manual de usuario
www.nuga.kr
NM-200
User Manual
ENGLISH / CE H/H / B TYPE / Rev. 00
2016.11.03
Tourmanium Product
Quality Warranty Enclosed
[ ENGLISH ]
185, Jiraeul-ro, Jijeong-myeon, Wonju-si,
Gangwon-do, Korea
TEL : +82-33-730-0001 / FAX : +82-33-730-0007
http://www.nuga.kr
Thank you for purchasing this product.
Before use...
Please read the cautions for safety in the
user manual to use this product safely.
NM-200
Product Components
Names and Functions of Product
Descriptions for Controller Buttons
How to Use Product
How to Take Emergency Actions during Use
How to Store and Clean after Use
Self-check Items
Before any A/S request
Controller Check Indicator Window
Product Specifications
Product Warranty
8
9
10
14
17
20
21
22
23
24
25
Product Introduction
How to Use Product
Product Storage and Care
Contents Cautions for Safety
Cautions for Safety
Cautions for your safety
Disclaimer
· These cautions include descriptions for the safety of users and prevention
of any damage to properties among others.
· Read through the following details to use the product appropriately.
· This Manual classifies the risk level into following three degrees and the
following graphical symbols remind users of cautions for matters and
operations of concerns about any risk.
· The manufacturer, importer and/or agent shall not be responsible for any
problem and/or other damage to the product which has been caused
from the user’s fault or operation.
· Information in the user manual has been prepared on the basis of the current
product specifications.
· Details in the user manual might be different from those on the product.
· The product manufacturer will be adding and supplementing new functions
at any time and new technologies shall be applied to the product continuously
in the future as well.
· All the standards and functions are subject to change without any notice
to users to improve performance.
Interpretations on symbols
Caution
If there is a possibility of a minor injury or damage to goods due to
non-compliance.
Danger
If there is high possibility of death due to non-compliance.
Warning
If there is a possibility of an injury or death due to non-compliance.
NM-200
Cautions for Safety
Put the projector sock on the projector while
using the projector to keep the projector from
touching the skin directly.
(Otherwise, it is likely that injuries occur.)
Avoid pulling out the power cord parts or touching
the power plug with the wet hands.
(Otherwise, it might cause electrical shock or fire.)
Do not use it for other usages than the described
purposes of uses.
(Otherwise, it might cause damage to the product.)
Do not apply washing or dry-cleaning.
(Otherwise, it might cause damage to the product
or any danger of electric shocks or fire.)
Anyone other than technicians qualified for our
company’s A/S should not disassemble, repair
or modify the product for any reason.
(Otherwise, it might cause damage to the product
or electric shock and/or fire.)
The appliance is not to be used by people
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been under
supervision or instruction
Do not place any heavy object or other electric
heater on this product.
(Otherwise, it might cause injuries or damage to
the product.)
Do not place any inflammable substances such as
the candle light, cigarette light and/or wine among
others, any vessel containing water, heavy object
and other substances.
(Otherwise, it might cause fire.)
Do not place the controller covered with any quilt
during use.
(Otherwise, it might cause damage to the product
or a danger of fire.)
Danger Warning
Avoid bending the power cord excessively or
pressing it down with heavy objects.
Never use other temperature controllers with
different specifications.
(Otherwise, it might cause damage to the product.)
Anyone using a cardiac pacemaker should consult
with a doctor before any use of this product.
NM-200
Product Components
Names and Functions of Product
Descriptions for Controller Buttons
8
9
10
Product Introduction
NM-200
Remove the power cord from the socket during no
use for a long time.
Keep any pin, wire or other metallic pieces from
stabbing or inserting to the product.
(Otherwise, it might cause damage to the
product.)
Use the product in a proper range of temperature
(50~60).
(Otherwise, it might cause burns.)
Do not expose the product to the direct sunlight.
(Otherwise, it might cause damage to the product.)
Check out the voltage before any use to ensure
the applicable voltage and apply the power plug to
the dedicated socket in any way.
Please abide by defined time and methods.
Caution
]WGGGGGGGGGGGGGGGG]W\WGGGGGGGGGGGGGGGG\W[WGGGGGGGGGGGGGGGG[WZWGGGGGGGGGGGGGGGGZW
Heater Controller
User ManualPocket Heater Cover
It is connected to an outlet to input the power supply
to the product.
ⴚPower cord
It controls temperature in the heater with convenience
in use due to the compact design.
ⴙController
Name Function
The heater as the main component in the product is
combined with tourmanium to increase the heating
effects.
ⴘHeater
Product Introduction
ⴘHeater ⴙController ⴚPower cord
Names and Functions of Product
Product Components
NM-200
www.nuga.kr
NM-2 0 0
User Manual
Thank you for purchasing this product.
Before use...
Please read the cautions for safety in the
user manual to use this product safely.
Tourmanium Product
QualityWarranty Enclosed
[ENGLISH ]
i
Introduction
Please check out whether all the components are unpacked in hand
before installing the product.
Please inquire from of your supplier if there is any missing or
damaged component.
Some specifications and/or designs are subject to change for
improving the product performance.
Descriptions for Controller Buttons
Unit to display operation state of the heater
Unit to display the setting/current temperature
of the heater
Unit to display turn on/off of the controller
Unit to control ON/Off of the power supply
for the controller
Unit to control the temperature of the heater
Cable for supplying power to the controller
Name Function
NM-200
Product Introduction
ྛOperation
indicator lamp
ྚTemperature
indicator window
ྙPower indicator lamp
ྜPower button
ྜྷTemperature
control dial
ྞPower input cable
Memo
NM-200
How to Use Product
How to Take Emergency Actions during Use
14
17
How to Use Product
NM-200
How to Use Product
TUFQTUFQTUFQ
Press the power button on the
controller to turn on the power
supply for the product and
controller after connecting the
power cord to a socket.
The current temperature is
shown on the temperature
indicator window.
The current temperature is
shown on the temperature
indicator window after the
user’s setting temperature
is blinking three times.
A red light is lit on the
operation indicator lamp if
the current temperature is
higher than the setting
temperature.
Turn the temperature control dial
clockwise on the controller to set
the desired temperature.
(30~70)
Power
indicator lamp
How to Use Product
Before using product
'RQRWXVHLWIRURWKHUXVDJHVWKDQWKHGHVFULEHGSXUSRVHVRIXVHV&KHFNRXWWKHYROWDJHLQXVHEHIRUHDQ\XVH$Q\RQHXVLQJDFDUGLDFSDFHPDNHUVKRXOGFRQVXOWZLWKDGRFWRUbefore any use of this product.
1HYHUXVHRWKHUWHPSHUDWXUHFRQWUROOHUVZLWKGLIIHUHQWspecifications.
'RQRWSODFHWKHFRQWUROOHUFRYHUHGZLWKDQ\TXLOWGXULQJXVH8VHWKHSURGXFWLQDSURSHUUDQJHRIWHPSHUDWXUHKeep the product tightly close
to the desired area in the body
after setting the temperature.
i
NM-200
How to Take Emergency
Actions during Use
TUFQTUFQ
Remove the power cord from
the socket in any case after
using the product.
Then, all the lamps on the
controller are tuned off.
Press the power button to turn
off the power on the product
and controller if you want to
stop using the product.
NM-200
How to Use Product
Stop using the product immediately and remove
the power plug if there is any lightning.
Stop using the product immediately and contact
your supplier branch or our company if you smell
any burn or detect any smoke from the product.
Stop using the product immediately and consult
with a doctor if any abnormality occurs to the
human body.
Turn off the power switch immediately, stop using
the product and contact our company if you find
out any failure or power failure from the product.
Turn off the power switch, remove the power
plug immediately, and then contact our company
if you have poured water into the product.
Memo
NM-200
How to Store and Clean after Use
Self-check Items
Before any A/S request
Controller Check Indicator Window
Product Specifications
Product Warranty
20
21
22
23
24
25
Product Storage and Care
NM-200
Tabla de contenidos
Otros manuales de Producto de cuidado personal de Nuga
Manuales populares de Producto de cuidado personal de otras marcas
HiB
HiB Spectre 50 Manual de usuario
Carex
Carex SunLite Manual de usuario
Roper Rhodes
Roper Rhodes Intense Manual de lista de piezas
Interacoustics
Interacoustics Titan IMP440 Instrucciones de funcionamiento y seguridad
ReTrak
ReTrak VS001 Manual de usuario
LED Technologies
LED Technologies dpl PAIN RELIEF Joint Wrap Manual de usuario
