NUCLEONIX SYSTEMS PRIVATE LIMITED RM704 Manual de usuario

I N S T R U C T I O N

M A N U A L

NUCLEONIX SYSTEMS PRIVATE LIMITED

Plot No. : 162 A&B, PHASE II, I.D.A. Cherlapally, Hyderabad - 500 051.

Ph : 040-27263701, 32914548, Fax : 040-27262146

e-mail : info@nucleonix.com website : www.nucleonix.com

File Name :RM704_Man

Date:12-05-2014

GAMMA RADIOGRAPHY SURVEY METER

TYPE : RM704

CONTENTS

SL.NO.DESCRIPTION PAGE NO.

CHAPTER I INTRODUCTION 01-01

CHAPTER II SPECIFICATIONS 02-02

CHAPTER III OPERATIG INSTRUCTIONS 03-07

CHAPTER IV BLOCK DIAGRAM DESCRIPTION 08-09

CHAPTER V EQUIPMENT MAINTENANCE SERVICES 10-15

AND WARRANTY CLAUSE

Important Note : For all Radiation meters which are battery powered & exported, battery cells

are removed & shipped. This is because air line / customs will not accept electronic equipments

with battery cells inside Hence customers are requested to procure these battery cells locally &

power-up the unit. For battery cells replacement, refer to CHAPTER-V.

NUCLEONIX SYSTEMS PVT. LTD

CHAPTER - I

INTRODUCTION

Gamma Radiography Survey Meter Type RM704 designed, manufactured and supplied by

Nucleonix Systems is a state of art Micro-controller based unit which serves as a general purpose

alarming survey meter for use in medical, agricultural, industrial & other installations where

radioactive isotopes are used for a variety of applications.

This unit will be additionally used in measuring radiation levels in Reactor buildings, nuclear

installations, Radio-chemical plants, reprocessing plants, etc., It measures doserate in the range

of 0-50R/hr / 0-500mSv/hr in 5 linear ranges. It also measures count rate in the range of 0-

99999 cps in 4 linear ranges.

It has a lot of unique features which includes user interface through a set of four commands

buttons & the visual indication to the user is on a large analog LCD display. Data visualization is

provided on both linear analog scale & direct digital display.

FEATURES :

❑Conforms to ANSI N42.17A performance specifications for Health Physics instrumentation

(portable) & CE compliant.

❑Micro-controller based design.

❑Compact, Elegant and light weight.

❑Measures gamma dose rate in R/h or Sv/h

❑Dose rate accuracy of +/- 15% with Co-60

❑Overall response within +/- 20% in the energy range of 60 Kev to 1.33 Mev.

❑Uses large area custom LCD display for dose rate visualization.

❑Preset alarm facility for generation of audio / visual alarms.

NUCLEONIX SYSTEMS PVT. LTD

CHAPTER - II

SPECIFICATIONS

Radiation detected :X and Gamma rays

Detector :A miniature halogen quenched GM detector with energy

compensating filter

Measurement Unit :CPS / R/hr / Sv/hr

Measurement Range

Doserate:0 mR/hr - 50R/hr or

0- 500mSv/hr in 5 linear ranges

Countrate:0 - 99999 cps in 4 linear ranges

Accuracy :Within +/- 15% with Co-60

Indication (Visual) :Analog bar scale visualization along with direct digital

indication on custom backlit LCD display.

Range Selection :Automatic

Over range:Sense over range and shows on display

Energy response :Within + / - 20% in the range of 60 KeV to 1.33 MeV

Time constant :Floating time constant of 4 sec / 8 sec

Preset alarm range:0 - 999.9 mR/hr or

0 - 9999 mSv/hr or

0 - 9999 cps

Once dose-rate / count-rate exceeds these levels alarms set ON

automatically.

Audio :Built-in piezo buzzer for generating audio chirps for radiation

events and alarm O/P for preset alarms.

User Interface:FN, , p&qare the four control buttons provided on the

instrument. The above buttons allow the user to program and

operate the instruments in appropriate manner for

configuration and measurement.

Power :6V, DC size AA MN1500 LR6 (4 x 1.5V) alkaline cells.

Battery indication :Battery low indication is provided on LCD display

Dimensions :106W x 196L x 85Ht in mm (approx.)

NUCLEONIX SYSTEMS PVT. LTD

CHAPTER - III

OPERATING INSTRUCTIONS

The instrument is configured and ready for use with default settings. If user extends to change

the settings may do so by going through below configuration options

3.1 CONFIGURATION BEFORE USE

3.1.1 SWITCHING ON/OFF THE EQUIPMENT

The instrument will be switched ON only when is pressed for minimum 1 sec. For

switching OFF the equipment pressed for minimum 2sec. If it is pressed for longer

time then it will automatically get switched OFF.

3.1.4 AUDIO

The instrument is given provision for audio to be generated through (headphones),

(buzzer) or it can be kept OFF. For that select the below screen on the LCD by

pressing FN key.

Now using por qkeys, toggle the audio status to

either ON ( headphone mode) or ON

( Buzzer mode) or OFF

100

10 30

NUCLEONIX

Now using p or q buttons select the required

unit as R/hr or Sv/hr or CPS.

After last key press, within a few seconds the new

measurements are done in the freshly selected unit.

100

10 30

R/hr

NUCLEONIX

3.1.2 UNIT OF MEASURERMENT

The instrument is provided with 3 units of measurement - R/hr, Sv/hr and CPS. The

range of measurement is to be selected automatically depending upon the current

doserate/countrate level. Select the following screen by pressing FN key.

3.1.3 BACK LIGHT

The LCD display is provided with a LED backlight which can be turned ON if required.

For that select the below screen on the LCD by pressing FN key.

Now using por qkeys, toggle the backlite status

to ON or OFF. Keep the backlite OFF to maximize

battery life when not required.

100

10 30

NUCLEONIX

NUCLEONIX SYSTEMS PVT. LTD

3.1.5 ADJUSTMENT OF CALIBRATION FACTOR

The instrument calibration factor is protected from unauthorized access by password

protection using below menu option calibration menu could be accessed.

Now using pand qkeys, enter the unlock code

to modify the calibration factor

Now press pto set the blinking digit or qto

select the next digit for adjustment.

The alarm level is adjustable in the range of 0-

999.9 mR/hr in R/hr unit, 0 - 9999 mSv/hr in

Sv/hr and 0 - 9999 cps in cps unit.

3.2 MEASUREMENT MODE

RANGE SELECTION

3.2.1 R/hr MODE

The unit operates in 5 linear ranges 0 - 5mR/hr, 0 - 50mR/hr, 0 - 500mR/hr, 0 - 5R/hr

and 0 -50R/hr. Depending upon the doserate/countrate, the range of operation is selected

automatically in the unit.

(Full scale = 5mR/hr)

3.1.6 ADJUSTMENT OF ALARM LEVEL

The preset alarm level of the instrument in the measurement unit can be set using the

below menu option. Press FN key to select the menu option.

100

10 30

mR/hr

NUCLEONIX

100

10 30

mR/hr

NUCLEONIX

x0.5

100

10 30

NUCLEONIX

100

10 30

mR/hr

NUCLEONIX

PRESET

D.RATE

888.8

x0.05

NUCLEONIX SYSTEMS PVT. LTD

(Full scale = 500mR/hr)

(Full scale = 5R/hr)

(Full scale = 50R/hr)

3.2.2 Sv/hr MODE

The unit operates in 5 linear ranges 0 - 50µSv/hr, 0 - 500µSv/hr, 0 - 5000µSv/hr, 0 -

50mSv/hr, and 0 -500mSv/hr. Depending upon current doserate, the range of operation

is selected automatically. The corresponding multiplication factors for bar scale indication

are (X 0.5µSv/hr, X5µSv/hr, X50µSv/hr, X0.5mSv/hr, X5mSv/hr)

3.2.3 CPS MODE

The unit operates in 4 linear ranges 0 - 100cps, 0 - 1000 cps, 0 - 10000 cps and 0 -

99999 cps. Depending upon current doserate, the range of operation is selected

automatically. The corresponding multiplication factors for bar scale indication are (X

1cps, X10cps, X 100cps, X 999 cps)

100

10 30

100

10 30

100

10 30

mR/hr

NUCLEONIX

R/hr

NUCLEONIX

X0.05

R/hr

NUCLEONIX

X0.5

The range changeover happens automatically when doserate exceeds 90% of current

range or falls below 5% of current range.

NUCLEONIX SYSTEMS PVT. LTD

3.3. DOSE RATE / COUNT RATE INTER PRETATION

Step -1 : Operating range selection

After power ON, the doserate/count rate ranges of operation are selected automatical

for the current unit of operation. If the dose rate exceeds 90% of a range then it switchs

to higher range. If it falls to less than 5% of current range then it would go to lower

range. In this way one of the 5 ranges in dose rate mode & 4 ranges in countsrate mode

are selected automatically.

If it exceeds full scale of the instrument O-Fl is shown on the instrument.

Step -2 : Dose rate / count rate inter pretation

For a given measurement range & unit the doserate / countrate canbe measured by

using 2 methods.

Method A : Using the 5 digit seven segment display shown on the bottom of the LCD

display along with the corresponding unit shown. This is direct readout value in selected

measurement unit. Multiplication factor should be ignored.

100

10 30

Method B - Using analog scale indication : The measured doserate/countrate is shown

as a analog indication using 51 independent bar scale LCD segments

R/hr

NUCLEONIX

000.00

100

10 30

mR/hr

NUCLEONIX

X0.05

NUCLEONIX SYSTEMS PVT. LTD

Measured doserate = (Last major division which is lit) +

(no.of segments lit after major division) x 2

X multiplication factor

Please refer to following examples to understand the doserate interpretation

Ex : 1

In this case all the segments are lit upto major

division 40. Additionally 2 minor segments

following 40 are also lit.

The multiplication factor shown is X 0.02 mR/hr. Now the doserate

= [40 + 2 x 2] x 0.05mR/hr

= 2.2mR/hr

Ex : 2

In this case all the segments are lit upto major division 80. Additionally 3 minor segments

following 80 are also lit.

The Multiplication factor shown is X 0.5mSv/hr

Now the doserate= [80 + 3x2] x 0.5mSv/hr

= 4.30mSv/hr

100

10 30

mR/hr

NUCLEONIX

X0.05

3.4 To make quality measurements

The instrument uses sliding time constant window to measure background radiation or

radiation emitted from a source / sample. Power the unit ON & select measurement unit.

Keep the unit front face in proximity to radiation source if applicable. Allow display to

show readings. After a gap of 10 seconds, take readings every 5 seconds. Take average of

about 5-10 readings to know the average doserate / countrate.

100

10 30

mSv/hr

NUCLEONIX

X0.05

NUCLEONIX SYSTEMS PVT. LTD

CHAPTER - IV

BLOCK DIAGRAM DESCRIPTION

Gamma Radiography Survey Meter RM704 is a battery operated radiation survey meter which

works on 6V (4 x 1.5V) AA size battery). Internally the regulated power supplies of +5V and

+5V/6V are generated by two low dropout regulators for powering the pulse processing and

display section and the high voltage section. The high voltage section generates an EHT of +500V

@ 75mA for biasing the GM detector which is used as the radiation sensor.

Pulse processing section comprises of a micro-controller , BCD counter, a negative tail pulse to

TTL convertor, E2PROM, Reset circuit and buzzer driver ckt.

The display & user input interface section comprises of a custom LCD display & a 2x2 matrix

keypad for configuring and use of the instrument the custom LCD comprises of a full scale

indication of 0 - 100 on analog scale with a resolution of 2. A corresponding multiplication

factor along with the measurement unit is displayed below. When the segments of the analog

indication are lit, then that corresponds to the value of the current measurement multiplied by

the multiplication factor shown below as X #.## where #.## is the multiplication factor.

Direct digital readout is given below in the bottom by 5 independent 7 segment displays along

with decimal point. The measurement unit is same as that of the analog LCDindication. Howerver

multiplication factor is not applicable.

Tabla de contenidos

Otros manuales de Instrumento de medición de NUCLEONIX SYSTEMS PRIVATE LIMITED

NUCLEONIX SYSTEMS PRIVATE LIMITED

NUCLEONIX SYSTEMS PRIVATE LIMITED GR612 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario