NPower 457801 Manual de usuario
IMPORTANT: PLEASE BE SURE TO READ AND SAVE THE ENTIRE
MANUAL BEFORE USING YOUR JUMPSTARTER. ANY MISOPERATION OR
MISUSING MAY DAMAGE THE EQUIPMENT OR CREATE HAZARDOUS
CONDITIONS FOR THE USER. PLEASE KEEP THIS MANUAL FOR FUTURE
REFERENCE.
22AH 800A Jumpstarter
OWNER’S MANUAL
Model number-457801
Conventions Used
The following conventions are used in this manual.
WARNING
Warnings identify conditions that could result in personal injury or
loss of life.
CAUTION
Cautions identify conditions or practices that could result in damage
to the unit or to other equipment.
NOTE: These notes describe an important action item or
an item that you must pay attention to.
Abbreviations and Acronyms
A Ampere
AC Alternating Current
Ah Amp-hours
DC Direct Current
mA milli-Ampere
V Volt
LED light-emitting diode
CONTENTS
1. Introduction..............................................................................................
2. Scope of delivery.....................................................................................
3.ImportantSafetyInstructions......................................................................
4. Features..................................................................................................
5. Operations...............................................................................................
6. Recharging..............................................................................................
7. 12V DC outlet.......................................................................................
8. Troubleshooting......................................................................................
9. Specifications..........................................................................................
10. Warranty................................................................................................
1.
2
2
2
4
7
8
11
11
12
13
2.
Easy-to-use and designed for reliable service, the NPOWER 800A Jumpstarter
can run many DC appliances whenever you need power for work or play, at
home or on the road. The 800A Jumpstarter has a battery inside, it is designed
for Jumpstart vehicles as SUVs, trucks, and vans…
The NPOWER Jumpstarter:
Powers 12V DC appliances
Jumpstarts vehicle engines up to 800A
Over load protection for 12V DC outlet
LED light for emergency
1. INTRODUCTION
2. SCOPE OF DELIVERY
3. IMPORTANT SAFETY INSTRUCTIONS
NO.
1Jump Starter with Jumpstart cables It is the main body
of the unit.
2
AC charging adapter lets you recharge the unit from a
standard AC wall outlet and can only be used to recharge the
internal battery of the unit.
3Owner’s instructions Read the instruction carefully before
use the unit.
Description
TThe NPOWER Jumpstarter generates the high current up to 800A. Operating
the Jumpstarter incorrectly or misusing it may damage the equipment or create
hazardous conditions for the user.
NOTE: Before using your Jumpstarter, be sure to read and save these
safety instructions.
CAUTION:
The unit is not intended for use as a UPS (Uninterrupted Power Supply).
3.
WARNING:
Before starting the vehicle, be sure that the clamps are connected in the right
way and the green indicator light is on.
WARNING:
The NPOWER Jumpstarter contains components that tend to produce arcs or
sparks. To prevent fire or explosion, do not operate the Jumpstarter in the
compartments containing batteries or flammable materials, or in locations
that require ignition-protected equipment.
WARNING:
This product contains a sealed, non-spillable lead-acid battery which must be
recycled or disposed of properly.
WARNING:
Working in the vicinity of a lead-acid battery is dangerous. During normal
operation, this type of battery releases hydrogen gas which is explosive,
poisonous and highly using the unit, you must carefully read and follow these
instructions and those published by the manufacturer of the battery or any
equipment you intend to use in the vicinity of the battery.
WARNING:
Protect the unit from direct sunlight or excessive heat and moisture.
WARNING:
This unit contains electrical circuitry that is not water-resistant. Do not
submerge the unit in water.
WARNING:
Never attempt to jump start or re-charge a frozen battery.
WARNING:
The jump start power switch controls power to the output terminals. To
prevent accidental shorting, keep this switch in the off position for all
operations, unless for jump starting or using the outing terminals to power a
12V DC appliance.
WARNING:
Do not smoke, use matches or cigarette lighter, or allow any spark or flame
near battery or engine.
4.
WARNING:
Put the clamps back on the holder after use to avoid sparking.
4. FEATURES
Front view
1. Battery level button— When pressed, you can see the battery level according
to the battery level indicators.
2. Battery power level indicators
The value of the battery
U<10.5±0.4V
（10.5±0.4V）<U<（12.5±0.4V）
U>12.5±0.4V
Display mode
Only red LED indicator lights.
Only yellow LED indicator lights.
Only green LED indicator lights.
Note: It is recommended that you should look over the battery power level
after every 30 minutes charging.
3. LED light —High brightness LED light for emergency use.
4. LED light switch
5. Correctly/incorrectly Connection indicator—When you connect the clamps to
the battery correctly, that is red clamp to the positive and black clamp to the
negative, the green LED lights. When you connect the clamps to the battery in
the wrong way, the red LED lights.
5.
6. Charging jack—you can charge the battery in the unit by inserting the
attached AC charging adapter into this it.
7. Bi-colored charging/charged indicator—.When the battery is being
charged, this LED indicator lights red, when the battery is full charged, this
LED indicator lights green.
8. 12V DC socket—It is an input or output easy-access port. You can insert
the cigarette plug into it to charge the interior battery or power 12V
accessories.
Note：The 12V DC socket contains 15A fuse for over current protection.
Note：It is recommended that you use the unit to power 12V
accessories less than 8A.
9. Black battery clip
10. Portable handle
11. Red battery clip
Note: Be sure that the switch is on off position and the clips are
connected in the right way, that is red to positive polarity, and black to
negative polarity.
Rear view
6.
12. Jumpstart power switch—It is a manual rotary switch. When you jump start
a vehicle, you should turn off the switch and the vehicle engine，connect the
unit to the vehicle, then you can turn on the switch, you must pay attention to
the operation process.
13. 15A replaceable fuse
AC charging adapter
14. AC charging adapter
Features of the AC charging adapter
Input voltage: 110V AC
Output voltage: 13.5V DC
Input current: 0.5A
Note: it is recommended that you use the AC charging adapter to charge
the battery.
7.
5. OPERATIONS
Dry Don’t allow water or other liquids to drop or splash on the
unit.
Cool
Ambient air temperature should be between -10℃and
40℃(14℉and 104℉) – the cooler the better within this
range.
Ventilated
Leave at least 2” (5cm) clearance around the Jumpstarter
for air flow. Ensure that the ventilation openings are not
obstructed.
Safe
Do not operate the unit in the same compartment as
batteries or in any compartment capable of storing
flammable liquids like gasoline.
Protected
from battery
gases
Do not operate the unit where it will be exposed to battery
gases.These gases are very corrosive and prolonged
exposure will damage the Jumpstarter
The unit should be operated only in locations that meet the following
requirements:
WARNING: Fire Hazard
Never allow jumpstart cables’ red and black clamps to touch each other or
another common metal conductor. This could cause damage to the unit
and/or create a sparking/explosion hazard.
WARNING:
The connection of the jumpstart cables to the vehicle’s battery terminals must
be positive to positive (red clamp to battery “+”) and negative to negative
(black clamp to battery “-“). A reverse polarity connection may cause damage
to the unit and/or create a sparking/explosion hazard.
NOTE:
Closely follow these instructions for jumpstart your vehicle as they may be
different from the instructions supplied with other jumpstart products or
jumpstart cables.
8.
The procedures to jump start a vehicle:
(1). Turn off the vehicle and all accessories.
(2). Place the NPOWER Jumpstarter on a flat and stable surface near the
battery which need to be started. Ensure that the Jumpstart power switch is
“OFF”.
(3). Connect the red positive (+) clamp of the cables to the positive (+) terminal
of the engine battery.
(4). Connect the black negative (-) clamp of the cables to the engine block,
cylinder head, or other stationary heavy metal part of the motor. If the red
“Reverse Polarity” LED illuminates, then reverse polarity has been detected.
Correct polarity must be established before proceeding. Disconnect the
Jumpstart clamps from the vehicle’s battery and do the steps (3) and (4) again.
(5). Switch on the Jumpstart power switch. Before starting the engine, make
sure the Jumpstarter and the cables are clear of the metal parts and other
moving things.
(6). Crank the engine for 5 seconds or until it starts, whichever is first.
WARNING: Fire hazard
Do not crank the engine for more than 5 seconds. The Jumpstart feature is
designed for short term operation only. Operating the Jumpstart feature for
more than 5 seconds may cause damage to the unit. Allow the NPOWER
Jumpstarter to cool down for at least 3 minutes after each boost.
(7). Switch off the Jumpstart power switch.
(8). Remove the red positive (+) clamp and then the black negative (-) clamp
from the engine battery.
6. RECHARGING
WARNING:
Do not charge the unit in wet or moist locations because it may cause severe
electric shock and injury may result.
WARNING:
Do not charge the unit immediately after any severe discharge or heavy usage.
Wait half an hour to let the battery of the unit cool down first.
Tabla de contenidos
