Novitec U-Nova Manual de usuario

[u-Nova + USB 3.0]

[Installation guide]

[u-Nova + Installation guide] 
 

Copyright ©2022_Ver.1 NOVITEC Co., Ltd. 
CONTENTS 
 
RECOMMENDED SYSTEM CONFIGURATION................................................................................ 4 
PREPARATION FOR CAMERA CONFIGURATION.......................................................................... 4 
HANDLING PRECAUTIONS............................................................................................................... 4 
1. INSTRUMENT SAFETY INSTRUCTIONS ............................................................................................................................................4 
2. IMPORTANT SAFETY PRECAUTIONS ................................................................................................................................................4 
3. HANDLING AND CLEANING ............................................................................................................................................................5 
4. INSTALLATION....................................................................................................................................................................................5 
5. PERFORMANCE AND LONGEVITY ....................................................................................................................................................6 
6. CONNECTOR......................................................................................................................................................................................6 
INSTALLING THE SOFTWARE .......................................................................................................... 6 
1. DOWNLOAD THE INSTALLATION FILE............................................................................................................................................6 
2. INSTALL THE NOVITEC SOFTWARE.................................................................................................................................................8 
INSTALLING THE CAMERA............................................................................................................. 11 
1. ATTACH A LENS ..............................................................................................................................................................................11 
2. CONNECT THE INTERFACE CARD AND CABLE TO THE CAMERA .............................................................................................11 
3. CONFIGURE USB SETTINGS .........................................................................................................................................................11 
4. LAUNCH VIEWER............................................................................................................................................................................16 
5. CONNECT THE CAMERA................................................................................................................................................................17 
6. GET THE IMAGE ..............................................................................................................................................................................18 
PHYSICAL INTERFACE ..................................................................................................................... 19 
1. POWER/VOLTAGE ...........................................................................................................................................................................19 
2. USB3.0 CONNECTOR....................................................................................................................................................................19 
3. GPIO CONNECTOR .......................................................................................................................................................................19 
TROUBLESHOOTING........................................................................................................................ 20 
1. UPGRADING CAMERA FIRMWARE ...............................................................................................................................................20 
2. SYSTEM ERROR:MSVCR110.DLL &MFC110U.DLL...............................................................................................................26 
3. CHECK THE VERSION OF THE USB PORT ..................................................................................................................................29 

[u-Nova + Installation guide]

8. IMAGE TABLE OF CONTENTS ........................................................................................................ 31

9. TABLE OF CONTENTS...................................................................................................................... 32

10. REVISION HISTORY ....................................................................................................................... 32

11. CONTACTING US............................................................................................................................ 32

[u-Nova + Installation guide]

1. Recommended System Configuration

The following system configuration is recommended when using the camera.

•OS –Microsoft Windows 7/8/10 (32-bit, 64-bit)

•Ports –USB 3.0

•Software –Microsoft Visual Studio 2015 (to compile and run example code)

2. Preparation for Camera Configuration

The following components are required to install the camera.

•USB3.0 cable (see 6.2. USB3.0 Connector)

•GPIO cable (see 6.3. GPIO Connector)

•Lens (see 5.1. Attach a Lens)

•Interface card

3. Handling Precautions

3.1. Instrument safety instructions

•We are not responsible for any damage caused by user negligence or other equipment connection.

•Handle the u-Nova with care. For example, be careful of strong impact or storage in an unsuitable

environment.

•Do not use accessories that are not recommended as they may be dangerous.

3.2. Important safety precautions

•Please check the specifications for each product and use a power supply with the appropriate

specifications.

•Keep the product away from radiators, heaters, stoves, or other products (amplifiers, etc.) and heat

sources.

•Be careful not to let flammable substances, water, or metal get inside the camera.

•Do not modify the camera or use the camera with the outer cover removed.

•Avoid using the camera in thunder or lightning storms.

[u-Nova + Installation guide]

•When using the camera outdoors, protect it from moisture. (rain/snow, etc.)

•Board level notes

- Be careful to avoid electric shocks such as static electricity (ESD).

- Use a ground (GND), etc. to cope with ESD, etc.

- Be careful not to get plastic, vinyl, or Styrofoam into the circuit board.

- Do not touch the parts of the circuit board with your hands or conductive devices.

3.3. Handling and cleaning

•Do not attempt to disassemble the camera.

•When replacing or removing the lens or filter, be careful not to allow water or dust to enter.

•Use a blower or lens brush to remove dust from the lens or optical filter.

•Do not disassemble the front flange.

•Clean the case with a soft, dry cloth.

•Do not use benzene, thinner, alcohol, liquid or spray-type cleaners.

3.4. Installation

Avoid installing or storing the camera in the following locations.

•Environments exposed to direct sunlight, rain or snow

•Environments with flammable or corrosive gases

•Excessive temperature or low temperature environment (recommended ambient temperature: 0 ~ 45°

•Wet or dusty places

•Places subject to excessive vibration or shock

•Environments exposed to strong electric or magnetic fields

•Do not point the camera at the sun or other strong light sources.

•In case of unfavorable conditions, be sure to inquire about the installation environment.

[u-Nova + Installation guide]

3.5. Performance and longevity

•Please configure the environment that meets the camera operation specifications. If the ambient

temperature is high, the service life may be shortened due to deterioration of the parts. In that case,

you also need to consider the cooling system.

3.6. Connector

•When manufacturing the I/O connector, be careful with the connection so that the wires fit well.

•Make sure the power is off before connecting or disconnecting I/O connectors.

•To avoid damaging the connector, do not pull by the electric wire, etc.

4. Installing the Software

4.1. Download the Installation File

We recommend that you download and install the latest version of the SDK from the Novitec website.

a. Go to the Novitec website (https://www.novitec.co.kr/).

<image> 1. Enter the website address image

b. Click [Machine Vision] of [Products] in the top tab.

<image> 2. Click Machine Vision Image

c. Click [2D vision] in Machine Vision.

[u-Nova + Installation guide]

<image> 3. Click 2D vision image

d. Click one of the uN-20M, uN-20C, uN-20C-F in the camera list to Access the page.

<image> 4. Camera list image

e. Click [Download] of SDK, in the download field at the bottom of the product page.

<image> 5. Download section on product page image

f. Click [Download] of MV_u-Nova SDK to download the installation file.

[u-Nova + Installation guide]

<image> 6. SDK download window image

4.2. Install the Novitec Software

Refer to 4.1. Download the Installation File to prepare the installation file for Windows.

a. Execute the u-Nova SDK installation file (Setup_u-NovaSDK_X.X.X.X.exe) and Click [Next >].

<image> 7. Installation Startup Image

b. Click [I Agree].

[u-Nova + Installation guide]

<image> 8. License agreement image

c. After selecting the folder to install, Click [Install].

[u-Nova + Installation guide]

<image> 9. Choose Install location image

d. Click [Finish] to finish the installation.

Tabla de contenidos

Otros manuales de Cámara de seguridad de Novitec

Novitec

Novitec i-Nova2 Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario

Novitec u-Nova Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas