Operating instructiOns 4126
82012-12- 06
safeTy
Application
Never use the machine for material which is outside the capacity range of the machine. Check
the machine plate for more information.
Before the machine is operated the following steps must be taken:
Check that all safety devices function and that they are not damaged. Also check that moveable parts are
not exposed to obstacles e.g. owing to incorrectly mounted guards or parts. Broken parts or safety com-
ponents must be changed by authorized staff. Contact Nosstec in case spare parts are needed. The ma-
chine has a 24 month applicable warranty from date of delivery. The warranty is only applicable as long
as original spare parts are used.
Check that the environment around the machine is suitable
• Do not expose the machine to rain.
• Do not use the machine in wet or damp premises.
• Check that the lighting of the premises is satisfactory.
• The floor must be clean, dry and free from oil and grease spots.
• Never use easily inflammable material close to the machine.
• Dirty working sites increase the risk of accidents.
Avoid unstable working positions
Check that the operator always has a secure and stable working position.
Do not keep tools on the machine
Remove all tools from the machine before it is operated.
All repairs must be carried out by authorized staff
The machine has been made according to valid safety rules. All repairs must be carried out by
trained and qualified staff. Only original spares must be used.
Note: If the repairs also involve dismantling of the machine, this must be carried out
according to the enclosed dismantling instruction. This instruction must not be kept
together with the machine.
