Nortel 5510 Manual de usuario
Nortel Ethernet Routing Switch 5500 Series
Installation — SFPs
NN47200-302 (323850-A)
.
Document status: Standard
Document version: 03.01
Document date: 19 July 2007
Copyright © 2007, Nortel Networks
All Rights Reserved.
Sourced in Canada and the United States of America
3
Contents
New in this release 5
Features 5
1000BASE-BX support 5
Other changes 5
Introduction 7
Safety and regulatory information 9
Handling, safety, and environmental guidelines 9
Electrostatic discharge prevention 9
Care of fiber optic equipment 10
Fiber optic cable care 10
Fiber optic connector care 11
Job aid: connector cleaning tools and materials 11
Cleaning single SC and FC connectors 12
Cleaning duplex SC connectors 12
Cleaning receptacles 13
Product safety warnings and information 13
Small form factor pluggable transceivers 17
Selecting an SFP 17
Procedure job aid: SFPs and common applications 18
Procedure job aid: SFP models without DDI support 18
Procedure job aid: SFP models with DDI 19
Installing an SFP 20
Procedure job aid: locking and extractor mechanisms 21
Removing an SFP 22
SFP specifications 23
SFP labels 23
General SFP specifications 24
1000BASE-T SFP specifications 24
1000BASE-SX (LC) SFP specifications 25
1000BASE-SX (MT-RJ) SFP specifications 26
1000BASE-LX SFP specifications 26
1000BASE-XD CWDM SFP specifications 27
Nortel Ethernet Routing Switch 5500 Series
Installation — SFPs
NN47200-302 03.01 Standard
5.1 27 August 2007
Copyright © 2007, Nortel Networks
.
4Contents
1000BASE-ZX CWDM SFP specifications 28
1000BASE-BX DDI SFP specifications 28
Index 30
Nortel Ethernet Routing Switch 5500 Series
Installation — SFPs
NN47200-302 03.01 Standard
5.1 27 August 2007
Copyright © 2007, Nortel Networks
.
5
New in this release
The following sections detail what’s new in Nortel Ethernet Routing Switch
5500 Series Installation — SFPs for release 5.1.
Features See the following sections for information about feature changes.
1000BASE-BX support
The Ethernet Routing Switch 5500 Series supports the 1000BASE-BX SFP.
See "1000BASE-BX SFP specifications" (page 28).
Other changes
This document is a new document based upon Nortel Ethernet Routing
Switch 8600 Installation — SFP and XFP Tranceivers and GBICs
(NN46205-305).
Nortel Ethernet Routing Switch 5500 Series
Installation — SFPs
NN47200-302 03.01 Standard
5.1 27 August 2007
Copyright © 2007, Nortel Networks
.
6New in this release
Nortel Ethernet Routing Switch 5500 Series
Installation — SFPs
NN47200-302 03.01 Standard
5.1 27 August 2007
Copyright © 2007, Nortel Networks
.
7
Introduction
This document provides installation instructions and technical specifications
for Small Form Factor Pluggable (SFP) transceivers.
For a list of supported SFPs, see your latest product-specific release notes.
Information contained in the Release Notes takes precedence over any
information contained in this document.
Navigation
•"Safety and regulatory information" (page 9)
•"Small form factor pluggable tranceivers" (page 17)
•"SFP specifications" (page 23)
Nortel Ethernet Routing Switch 5500 Series
Installation — SFPs
NN47200-302 03.01 Standard
5.1 27 August 2007
Copyright © 2007, Nortel Networks
.
8Introduction
Nortel Ethernet Routing Switch 5500 Series
Installation — SFPs
NN47200-302 03.01 Standard
5.1 27 August 2007
Copyright © 2007, Nortel Networks
.
9
Safety and regulatory information
This section contains important safety and regulatory information. Read this
section before you install Small Form Factor Pluggable (SFP) transceivers.
Navigation
•"Handling, safety, and environmental guidelines" (page 9)
•"Care of fiber optic equipment" (page 10)
•"Product safety warnings and information" (page 13)
Handling, safety, and environmental guidelines
Before you install an SFP, read the following handling, safety, and
environmental guidelines:
•SFPs are static sensitive. To prevent damage from electrostatic
discharge (ESD), see "Electrostatic discharge prevention" (page 9).
•SFPs are dust sensitive. When you store an SFP, or when you
disconnect it from a fiber optic cable, always keep a dust cover over
the optical bore.
•To clean contaminants from the optical bores of an SFP, use an alcohol
swab or equivalent to clean the ferrules of the optical connector.
•Dispose of this product according to all national laws and regulations.
Electrostatic discharge prevention
To prevent equipment damage, observe the following electrostatic discharge
(ESD) precautions when handling or installing the components.
•Ground yourself and the equipment to an earth or building ground. Use
a grounded workbench mat (or foam that dissipates static charge) and
a grounding wrist strap. The wrist strap should touch the skin and be
grounded through a one megaohm resistor.
•Do not touch anyone who is not grounded.
•Leave all components in their ESD-safe packaging until installation, and
use only a static-shielding bag for all storage, transport, and handling.
Nortel Ethernet Routing Switch 5500 Series
Installation — SFPs
NN47200-302 03.01 Standard
5.1 27 August 2007
Copyright © 2007, Nortel Networks
.
10 Safety and regulatory information
•Clear the area of synthetic materials such as polyester, plastic, vinyl, or
styrofoam because these materials carry static electricity that damages
the equipment.
Care of fiber optic equipment
Fiber optic equipment must be kept clean and damage-free. Use the
information in this section to properly maintain and care for fiber optic
equipment.
Care of fiber optic equipment navigation
•"Fiber optic cable care" (page 10)
•"Fiber optic connector care" (page 11)
•"Job aid: connector cleaning tools and materials" (page 11)
•"Cleaning single SC and FC connectors" (page 12)
•"Cleaning duplex SC connectors" (page 12)
•"Cleaning receptacles" (page 13)
Fiber optic cable care
Although the glass fiber of fiber optic cable is protected with reinforcing
material and plastic insulation, it is subject to damage. Use the following
precautions to avoid damaging the glass fiber.
•Do not kink, knot, or vigorously flex the cable.
•Do not bend the cable to less than a 40 mm radius.
•Do not stand on fiber optic cable; keep the cable off the floor.
•Do not pull fiber optic cable any harder than you would a cable containing
copper wire of comparable size.
•Do not allow a static load of more than a few pounds on any section
of the cable.
•Place protective caps on fiber optic connectors that are not in use.
•Store unused fiber optic patch cables in a cabinet, on a cable rack, or
flat on a shelf.
Frequent overstressing of fiber optic cable causes progressive degeneration
that leads to failure.
If you suspect damage to a fiber optic cable, either due to mishandling or
an abnormally high error rate observed in one direction, reverse the cable
pairs. If the high error rate appears in the other direction, replace the cable.
Nortel Ethernet Routing Switch 5500 Series
Installation — SFPs
NN47200-302 03.01 Standard
5.1 27 August 2007
Copyright © 2007, Nortel Networks
.
Otros manuales para 5510
1
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Cambiar de Nortel
Nortel
Nortel 2500 Seriess Manual del operador
Nortel
Nortel Meridian Meridian 1 Manual de instrucciones
Nortel
Nortel Passport 2430 Manual de usuario
Nortel
Nortel 2250 Dimensiones
Nortel
Nortel Passport 7400 Instrucciones de funcionamiento
Nortel
Nortel Passport 15000 Instrucciones de funcionamiento
Nortel
Nortel 5530 Manual de usuario
Nortel
Nortel Passport 8006 Manual de usuario
Nortel
Nortel 2526T Manual de usuario
Nortel
Nortel 2382 Manual de usuario
Nortel
Nortel AN/DC Manual de usuario
Nortel
Nortel DMS-100 Series Instrucciones de funcionamiento y mantenimiento
Nortel
Nortel Versalar 15000 Manual de usuario
Nortel
Nortel Contivity Extranet Switch 2500 Manual de usuario
Nortel
Nortel BayStack 460 Switch Manual de programación
Nortel
Nortel Passport 8600 Series Manual de usuario
Nortel
Nortel 5500 series Manual de usuario
Nortel
Nortel Passport 7400 Manual
Nortel
Nortel 1200N Manual de usuario
Nortel
Nortel 251 Manual de usuario
