Nortel CS 1000 Series Manual de usuario

Nortel Communication Server 1000

SIP DECT Fundamentals

Release: 5.5

Document Revision: 01.07

www.nortel.com

NN43120-123

Nortel Communication Server 1000

Release: 5.5

Publication: NN43120-123

Document release date: 6 January 2009

Sourced in Canada

LEGAL NOTICE

While the information in this document is believed to be accurate and reliable, except as otherwise expressly

agreed to in writing NORTEL PROVIDES THIS DOCUMENT "AS IS" WITHOUT WARRANTY OR CONDITION OF

ANY KIND, EITHER EXPRESS OR IMPLIED. The information and/or products described in this document are

subject to change without notice.

Nortel, the Nortel Logo, the Globemark, SL-1, Meridian 1, and Succession are trademarks of Nortel Networks.

All other trademarks are the property of their respective owners.

Contents

New in this release 7

Other changes 7

Product overview 9

Navigation 9

Overview of SIP DECT 9

Types of SIP DECT configuration 12

Universal extension support 14

DECT handset features 16

CallPilot and Message Waiting Indication support 16

SIP DECT capacity limitations 17

Site planning 19

Navigation 19

Site planning overview 19

Position and use of available cabling 20

Radio coverage 20

Number of handset users 21

Site survey example 21

A normal site survey 21

Site planning example: Able-Studio 22

The facts for Able-Studio 22

The site survey process for Able-Studio 22

DAP deployment rules and requirements 27

Radio synchronization 27

IP network configuration 31

DAP power configuration 34

Initial critical points on the floor plan to identify 34

Rules and guidelines to locate cell centers 35

Coverage and signal strength calculation 37

Determine cell boundaries 38

Identify critical points and cell boundaries 39

Mark the points, centers, and boundaries on the floor plan 40

Deployment illustrations 42

Deployment terms 50

Nortel Communication Server 1000

SIP DECT Fundamentals

NN43120-123 01.07

6 January 2009

Coverage terms 51

Deployment tool 52

Prepare the tool for deployment 54

How the deployment tool works 61

Using the deployment tool 62

Handset tones interpretation 63

Rules for outdoor deployment 63

DECT Deployment Kit 2 64

DAP deployment 67

Correct audio quality problems 71

Single and multiple floor deployment 72

Single floor deployment 72

Multiple floor deployment 78

Reengineer cells for high traffic areas 83

Traffic volume 83

The cell reengineering process 83

Cell division requirements in special cases 92

No office information 92

A mix of users with and without wired telephones in a cell 93

High handset density deployment 95

Limit the anticipated number of handsets 95

Subdivide a cell 95

Deployment review 97

Floor plan completion 97

Hardware installation 99

Navigation 99

Call server 99

Signaling server 99

PC (DAP controller) 100

DECT Access Points 100

Software requirements 103

Navigation 103

Call server software 103

Signaling server software 103

DAP controller software 103

Firewall protection 104

Internet information services 105

DHCP and TFTP servers 111

DAP Controller 130

System configuration 135

Navigation 135

Simple SIP DECT configuration 135

Nortel Communication Server 1000

SIP DECT Fundamentals

NN43120-123 01.07

6 January 2009

Configuration of settings using IP DECT Configurator 136

DAP manager configuration 150

Configuration on Element manager 154

NRS configuration 163

Call server configuration 170

Routed Head Quarter configuration 173

Choice of system configuration 174

Multi site mobility network configuration 175

Subscribe a multi site DECT handset 176

Import and export subscriptions 177

Configure NRS for multi site mobility network 178

Call server configuration to MSMN 179

Configuration of Personal Call Assistant 182

Configuration of Universal Extension (UEXT) on the remote system 182

System administration 185

Navigation 185

DAP manager overview 185

Subscription management 187

Subscribe a handset 187

Edit a subscription RPN 188

Disable a subscription 189

Remove a subscription 190

Delete a number 190

Use the DNR filter 191

Handset status 192

DAP management 194

Change a DAP Radio Part Number (RPN) 194

Reboot a DAP 195

Reboot all DAPs 195

Add a DN range 196

Back up and restore subscriptions 197

Subscription export and import 198

Export subscriptions 199

Import subscriptions 201

DAP reboot history 202

System archive 202

Handset firmware update 204

Central directory access tool 208

Supported database types 209

Installation 210

Configure SIP DECT for Central directory access 213

System maintenance 215

Navigation 215

Nortel Communication Server 1000

SIP DECT Fundamentals

NN43120-123 01.07

6 January 2009

DAP LED indications 215

DAP firmware update 216

Remove and replace a DAP (if a new DAP is available) 217

Remove and replace a DAP (if a new DAP is not available at the moment) 218

System synchronization analysis 219

Synchronization Analyzer interface 220

Export and import SIP DECT system 228

Export a system 228

Import a system 229

DAP Controller deactivation 230

DAP Controller software deinstallation 230

DAP Controller software update 231

Troubleshooting 232

If DAP is not working 232

If you cannot make calls from a DECT handset to an IP/TDM telephone on the

call server 233

If you cannot make calls between DECT handsets 234

If you have problems 236

System survey 236

System archive 238

Network packet capture traces 238

Location builder tool 239

Use the Location builder tool 239

Create a location file 241

Maintenance 246

Nortel Communication Server 1000

SIP DECT Fundamentals

NN43120-123 01.07

6 January 2009

New in this release

Nortel Communication Server 1000 (CS 1000) Release 5.5 introduces

Nortel Session Initiation Protocol (SIP) Digital Enhanced Cordless

Telecommunications (DECT). SIP DECT includes new SIP DECT Access

Points (DAP).

Other changes

This section describes the detailed history of past releases of this

document.

Revision History

Date Description

January 2009 Standard 01.07. This document is up-issued for Release 5.5

with editorial changes.

December

2008 Standard 01.06. This document is up-issued for Release 5.5, in

response to change requests for content related to SIP DECT

4.1.

July 2008 Standard 01.05. This document is up-issued in response to

change requests.

July 2008 Standard 01.04. This document is up-issued in response to

change requests.

May 2008 Standard 01.03. This document is up-issued in response to

change requests.

March 2008 Standard 01.02. This document is up-issued in response to

change requests.

February

2008 Standard 01.01. This is a new document issued to support

Communication Server 1000 (CS 1000) Release 5.5. Some

of the information in this new document was previously

contained in the following document: DECT Fundamentals

(NN43120-114).

Nortel Communication Server 1000

SIP DECT Fundamentals

NN43120-123 01.07

6 January 2009

8New in this release

Nortel Communication Server 1000

SIP DECT Fundamentals

NN43120-123 01.07

6 January 2009

Product overview

Navigation This chapter contains information about the following topics.

•“Overview of SIP DECT” (page 9)

Overview of SIP DECT

You can use Nortel Session Initiation Protocol (SIP) Digital Enhanced

Cordless Telecommunications (DECT) to move without restriction about

your work site while conducting telephone conversations, using wireless

handsets. The Nortel SIP DECT system includes one or more DECT

access points (DAPs or basestations) connected to the TLAN.

A minimal SIP DECT system has the following five main components.

•Call Server

•Signaling Server

•PC with DAP controller software installed

•DAP

•handset

Use the following four tools to configure an IP DECT system.

•Element manager or overlay program for Call Server

•Element manager and, if required, Network Routing Service (NRS)

manager for Signaling Server

•IP DECT Configurator

•DAP manager IP DECT

Note: The IP DECT Configurator and the DAP manager IP DECT are

available as a part of the DAP controller software package.

The following software releases are required on the main system

components.

Nortel Communication Server 1000

SIP DECT Fundamentals

NN43120-123 01.07

6 January 2009

10 Product overview

•Call Server, Release 5.5

•Signaling Server, Release 5.5

•DAP software 4910b414.dwl or later

•DAP controller 4.1 or later (PC software)

You can connect IP phones to the TLAN, connect TDM phones to the

Call Server, Voice Gateway Media Cards and other required cards in Call

Server. Use Voice Gateway Media Cards for IP-to-TDM calls and for

conference calls involving IP phones or DECT handsets on basestations.

The configuration can also include a PC with DECT Messenger to provide

the DECT messaging service on SIP DECT.

Note: For SIP DECT to function properly, you must install a dedicated

Signalling Server running the SIP Gateway application. Other

applications, such as H323 Gateway, NRS, and IP Phones, can be used

on the same Signaling Server without limitations.

Use the Dynamic Host Control Protocol (DHCP) server or the Trivial File

Transfer Protocol (TFTP) server unless you use a DAP configuration

without DHCP or TFTP. You can configure the system to use two separate

servers; one for DHCP and the other for TFTP. If the system requires

DAP configuration without DHCP or TFTP, the DHCP or TFTP server is

required during installation or configuration changes.

Figure 1 "SIP DECT configuration" (page 11) shows a general SIP DECT

system configuration.

Nortel Communication Server 1000

SIP DECT Fundamentals

NN43120-123 01.07

6 January 2009

Otros manuales para CS 1000 Series

Tabla de contenidos

Otros manuales de Servidor de Nortel

Nortel

Nortel HMS400 Manual de funcionamiento

Nortel

Nortel T1/SMDI Manual de usuario

Nortel

Nortel Enterprise Edge 2.0 Messaging Manual de usuario

Nortel

Nortel 1002rp Instrucciones de funcionamiento y mantenimiento

Nortel

Nortel DMS/MSL-100 Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Nortel

Nortel CallPilot Manual de usuario

Nortel

Nortel NN44200-300 Manual

Nortel

Nortel Communication Server 100 Manual de usuario

Nortel

Nortel 1002rp Guía de configuración

Nortel

Nortel 1000E Guía

Nortel

Nortel 5391 Instrucciones de instalación y funcionamiento

Nortel

Nortel BCM50 Guía de instalación

Nortel

Nortel CallPilot 702t Instrucciones de funcionamiento y mantenimiento

Nortel

Nortel CallPilot Instrucciones de funcionamiento y mantenimiento

Nortel

Nortel 1000 Con?guration guide Instrucciones de funcionamiento y mantenimiento

Nortel

Nortel CallPilot Manual de usuario

Nortel

Nortel 1000E Guía

Nortel

Nortel 5100 Series Release 2.3.3 Manual de instrucciones

Nortel

Nortel CallPilot Manual de usuario

Nortel

Nortel 2000 Instrucciones de montaje

Nortel

Nortel 1000E Instrucciones de funcionamiento y mantenimiento

Nortel

Nortel 1000E Guía

Nortel

Nortel Communication Server 1000 Guía

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario

Planet

Planet NAS-7410 Manual de usuario