Nortel CS 1000M HG Manual de usuario

Nortel Communication Server 1000

Fiber Remote Multi-IPE Interface

Fundamentals

NN43021-556

Document status: Standard

Document version: 01.01

Document date: 30 May 2007

Sourced in Canada.

The information in this document is subject to change without notice. The statements, conﬁgurations, technical

data, and recommendations in this document are believed to be accurate and reliable, but are presented without

express or implied warranty. Users must take full responsibility for their applications of any products speciﬁed in this

document. The information in this document is proprietary to Nortel Networks.

Nortel, the Nortel Logo, the Globemark, SL-1, Meridian 1, and Succession are trademarks of Nortel Networks.

All other trademarks are the property of their respective owners.

Revision history

May 2007

Standard 01.01. This document is issued to support Communication Server

Release 5.0. This document contains information previously contained in the

following legacy document, now retired: Fiber Remote Multi-IPE Interface

(553-3021-556). No new content has been added for Communication

Server 1000 Release 5.0. All references to Communication Server 1000

Release 4.5 are applicable to Communication Server 1000 Release 5.0.

August 2005

Standard 3.00. This document is up-issued to support Communication

Server 1000 Release 4.5.

September 2004

Standard 2.00. This document is up-issued for Communication Server 1000

Release 4.0.

October 2003

Standard 1.00. This document is a new NTP for Succession 3.0. It was

created to support a restructuring of the Documentation Library. This

document contains information previously contained in the following legacy

document, now retired: Fiber Remote Multi-IPE Interface: Description,

Installation, and Maintenance (553-3001-022).

Nortel Communication Server 1000

Fiber Remote Multi-IPE Interface Fundamentals

NN43021-556 01.01 Standard

Release 5.0 30 May 2007

4Revision history

Nortel Communication Server 1000

Fiber Remote Multi-IPE Interface Fundamentals

NN43021-556 01.01 Standard

Release 5.0 30 May 2007

Contents

About this document 9

Subject 9

Applicable systems 9

Intended audience 10

Conventions 10

NTP feedback 11

Related information 11

Product description 13

Contents 13

Introduction 13

System overview 13

System description 14

Engineering guidelines 31

Installation and conﬁguration 39

Contents 39

Introduction 39

Quick reference to system installation and conﬁguration 39

Installation overview 41

Preinstallation preparation 42

Fiber-optic equipment installation 46

Remote IPE installation 76

Conﬁguring the equipment 90

Conﬁguring the Fiber Remote Multi-IPE Interface unit 94

Remote IPE acceptance testing 105

Contents 105

Introduction 105

Acceptance testing overview 105

Checking the system 106

Setting up test conditions 106

Performing acceptance testing 107

Remote IPE maintenance 115

Contents 115

Nortel Communication Server 1000

Fiber Remote Multi-IPE Interface Fundamentals

NN43021-556 01.01 Standard

Release 5.0 30 May 2007

6Contents

Introduction 115

Maintenance overview 115

Diagnostic tools 116

Remote IPE fault isolation and correction 128

Replacing Remote IPE equipment 143

Appendix A Peripheral Controller HEX codes and cable

connection diagrams 151

Peripheral Controller hexadecimal codes 151

Fiber Remote Multi-IPE Interface units connection diagrams 152

Procedures

Procedure 1 Installing the Superloop Network card 47

Procedure 2 Installing cables between the Superloop Network card and the

network I/O panel 48

Procedure 3 Setting the S1 dip-switch 53

Procedure 4 Setting the S2 dip-switch 55

Procedure 5 Installing the daughterboard for the ﬁber-optic link 55

Procedure 6 Installing multiple Fiber Remote Multi-IPE Interface units into

the shelf 57

Procedure 7 Installing the Fiber Remote Multi-IPE Interface unit onto the

wall 60

Procedure 8 Installing local superloop cables 62

Procedure 9 Connecting a single Fiber Remote Multi-IPE Interface to the

system monitor 63

Procedure 10 Connecting multiple Fiber Remote Multi-IPE Interface units

to the system monitor 63

Procedure 11 Connecting the MMI terminal to a single Fiber Remote

Multi-IPE Interface unit 65

Procedure 12 Connecting the MMI terminal using a modem 66

Procedure 13 Connecting an NT8D41 SDI Paddleboard 66

Procedure 14 Connecting any other SDI card 67

Procedure 15 Connecting the SDI card and the MMI terminal to multiple Fiber

Remote Multi-IPE Interface units 68

Procedure 16 Connect the link to the Fiber Remote Multi-IPE Interface 70

Procedure 17 Connecting the external alarm cable at the local site 71

Procedure 18 Connecting the DC power source 72

Procedure 19 Connecting the AC/DC Power Converter 75

Procedure 20 Installing the internal cables to the Remote IPE module 77

Procedure 21 Mounting the Fiber Remote Multi-IPE Interface unit on the

wall 82

Procedure 22 Installing superloop cables 83

Procedure 23 Connecting the system monitor cable 84

Procedure 24 Connecting the MMI terminal: 85

Procedure Connecting the MMI terminal using a modem: 86

Procedure 25 Connecting multiple Fiber Remote Multi-IPE Interface units in a

daisy-chain conﬁguration 86

Procedure 26 Connecting the ﬁber-optic link to the Fiber Remote Multi-IPE

Interface at the Remote IPE site 88

Procedure 27 Connecting the external alarm cable at the remote site 89

Nortel Communication Server 1000

Fiber Remote Multi-IPE Interface Fundamentals

NN43021-556 01.01 Standard

Release 5.0 30 May 2007

Contents 7

Procedure 28 Conﬁguring the modem parameters 97

Procedure 29 Performing a call test 107

Procedure 30 Performing a call hold/call retrieve test 108

Procedure 31 Checking the MMI terminal operation 109

Procedure 32 Performing a manual switch-over 110

Procedure 33 Performing a forced switch-over 111

Procedure 34 Perform a fault recovery test 112

Procedure 35 Troubleshooting the ﬁber-optic link 117

Procedure 36 isolating Remote IPE faults 126

Procedure 37 Checking the status of the Superloop Network card 130

Procedure 38 Performing the Superloop Network card self-test 131

Procedure 39 Checking the Peripheral Controller card tracking status 132

Procedure 40 Performing the Peripheral Controller card self-test 133

Procedure 41 Displaying alarm and error logs to check the performance

history 135

Procedure 42 Checking the superloop and the ﬁber-optic link status 136

Procedure 43 Testing the superloops and the ﬁber-optic link 138

Procedure 44 Testing the superloop 139

Procedure 45 Testing the ﬁber-optic link 141

Procedure 46 Unpacking replacement equipment 143

Procedure 47 Removing and replacing a Superloop Network card 144

Procedure 48 Removing and replacing a Peripheral Controller card 145

Procedure 49 Removing and replacing a complete Fiber Remote Multi-IPE

Interface unit 146

Procedure 50 Removing and replacing the card in the Fiber Remote Multi-IPE

Interface unit 148

Procedure 51 Reinstalling covers 149

Procedure 52 Packing and shipping defective cards 149

Nortel Communication Server 1000

Fiber Remote Multi-IPE Interface Fundamentals

NN43021-556 01.01 Standard

Release 5.0 30 May 2007

8Contents

Nortel Communication Server 1000

Fiber Remote Multi-IPE Interface Fundamentals

NN43021-556 01.01 Standard

Release 5.0 30 May 2007

About this document

This document is a global document. Contact your system supplier or your

Nortel representative to verify that the hardware and software described

are supported in your area.

Subject This Nortel technical publication (NTP) provides information speciﬁc to the

implementation of ﬁber-optic links that connect a local system to multiple

Remote IPE modules using a pair of Fiber Remote Multi-IPE Interface units.

It describes the operation of the Fiber Remote Multi-IPE Interface equipment

and provides speciﬁc information on how to install and maintain this

equipment as an integral part of the local system. Fiber Remote Multi-IPE

Interface conﬁguration procedures are identical to the equivalent non-ﬁber

equipment. However, there are some additional software commands

that can be executed using the Man-Machine Interface (MMI) terminal to

speciﬁcally control ﬁber-optic equipment.

Note on legacy products and releases

This NTP contains information about systems, components, and features

that are compatible with Nortel Communication Server 1000 Release 4.5

software. For more information on legacy products and releases, click the

Technical Documentation link under Support & Training on the Nortel

home page:

www.nortel.com

Applicable systems

This document applies to the following systems:

•Communication Server 1000M Half Group (CS 1000M HG)

•Communication Server 1000M Single Group (CS 1000M SG)

•Communication Server 1000M Multi Group (CS 1000M MG)

•Meridian 1 Option 51

•Meridian 1 PBX 51C

Nortel Communication Server 1000

Fiber Remote Multi-IPE Interface Fundamentals

NN43021-556 01.01 Standard

Release 5.0 30 May 2007

10 About this document

•Meridian 1 PBX 61C

•Meridian 1 Option 71

•Meridian 1 PBX 81

•Meridian 1 PBX 81C

Note: When upgrading software, memory upgrades may be

required on the Signaling Server, the Call Server, or both.

System migration

When particular Meridian 1 systems are upgraded to run CS 1000 Release

4.5 software and conﬁgured to include a Signaling Server, they become

CS 1000M systems. Table 1 "Meridian 1 systems to CS 1000M systems"

(page 10) lists each Meridian 1 system that supports an upgrade path to

a CS 1000M system.

Table 1

Meridian 1 systems to CS 1000M systems

This Meridian 1 system... Maps to this CS 1000M system

Meridian 1 PBX 51C CS 1000M Half Group

Meridian 1 PBX 61C CS 1000M Single Group

Meridian 1 PBX 81 CS 1000M Multi Group

Meridian 1 PBX 81C CS 1000M Multi Group

For more information, see Communication Server 1000M and Meridian 1

Large System Upgrades Overview (NN43021-458).

Intended audience

This document is intended for individuals who are responsible for installing

and maintaining Fiber Remote Multi-IPE units as part of a CS 1000M Large

System or Meridian 1 Large System.

ConventionsTerminology

The following systems are referred to generically as "Large System":

•Communication Server 1000M Half Group (CS 1000M HG)

•Communication Server 1000M Single Group (CS 1000M SG)

•Communication Server 1000M Multi Group (CS 1000M MG)

•Meridian 1 Option 51

•Meridian 1 PBX 51C

•Meridian 1 PBX 61C

Nortel Communication Server 1000

Fiber Remote Multi-IPE Interface Fundamentals

NN43021-556 01.01 Standard

Release 5.0 30 May 2007

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de red de Nortel

Nortel

Nortel HomeOffice II Manual de usuario

Nortel

Nortel 2340 Manual de usuario

Nortel

Nortel 5000 Manual de instrucciones

Nortel

Nortel Passport 8683POS Guía

Nortel

Nortel Meridian 1 Option 11C Compact Manual de uso y cuidado

Nortel

Nortel 2230l 2231 Manual de usuario

Nortel

Nortel Passport 8000 Series Instrucciones de montaje

Nortel

Nortel BayStack 100-S Manual de instrucciones

Nortel

Nortel NAC Manual de usuario

Nortel

Nortel 1001t Manual de usuario

Nortel

Nortel Meridian Mail Manual de usuario

Nortel

Nortel Remote Office 9150 Manual de instrucciones

Nortel

Nortel BCN Dimensiones

Nortel

Nortel BayStack 100-S Manual de servicio

Nortel

Nortel 6000 Series Manual de usuario

Nortel

Nortel SONET AccessNode Manual de usuario

Nortel

Nortel 2600 Manual de usuario

Nortel

Nortel SONET AccessNode 800A Series Manual de usuario

Nortel

Nortel R2MFC Manual del operador

Nortel

Nortel 1800 Manual de instrucciones

Nortel

Nortel 2340 Manual de usuario

Nortel

Nortel Contivity 1740 Manual de instrucciones

Nortel

Nortel Passport 4430 Manual de usuario

Nortel

Nortel BayStack 100 Series Instrucciones de uso

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario