Norac U5 Manual de usuario

PULSE

Display Kit – Pull Type

Installation Manual

PULSE-PT01

Printed in Canada

Reorder P/N: PULSE-PT01-INST Rev B (PULSE Display Kit – Pull Type)

NOTICE: NORAC Systems International Inc. reserves the right to improve products and their specifications without notice and

without the requirement to update products sold previously. Every effort has been made to ensure the accuracy of the information

contained in this manual. The technical information in this manual was reviewed at the time of approval for publication.

Contents

1INTRODUCTION..................................................................................................... 2

1.1List of Parts..........................................................................................................................................................................2

1.2Optional RAM Mount Ordering Information ...............................................................................................................2

2TECHNICAL SPECIFICATIONS ............................................................................ 3

3INSTALLATION........................................................................................................ 4

4CABLE DRAWINGS ................................................................................................. 6

4.1ITEM C01: 43220-01 - CABLE UC5 NETWORK 14 AWG - 1M ...........................................................................6

4.2ITEM C02: 43220-03 - CABLE UC5 NETWORK 14 AWG - 3M ...........................................................................6

1Introduction

The PULSE™ Display Kit Manual is intended to be used in conjunction with the UC5™ Spray

Height Control Installation Manual. This manual provides instructions to interface the UC5

Control Module to the PULSE Display. For installation of the rest of the UC5 Spray Height

Control System please refer to the sprayer specific manual provided with the kit.

Your input can help make us better! If you find issues or have suggestions regarding the parts

list or the installation procedure, please don’t hesitate to contact us.

1.1 List of Parts

Item Part Number Name Quantity

C01 43220-01 CABLE UC5 NETWORK 14 AWG 1M 2

C02 43220-03 CABLE UC5 NETWORK 14 AWG 3M 1

D01 43800 UC5 PULSE DISPLAY PANEL 1

E12 43764 UC5 NETWORK COUPLER 2-WAY 1

E20 43764T UC5 NETWORK COUPLER 2-WAY WITH TERMINATOR 2

M01 UC5-BC-MANUAL-ECHO_VT MANUAL UC5 OPERATORS - ECHO/VT 1

M04 PULSE-PT01-INST MANUAL UC5 PULSE DISPLAY KIT - PULL TYPE 1

If this kit is being installed with an existing system with control module serial

number lower than 3200, the following cable is required:

Item Part Number Name Quantity

C30 43250-17 CABLE UC5 POWER RETROFIT FOR ECHO SWITCH FUSED 1

1.2 Optional RAM Mount Ordering Information

This is an optional suction cup mount that may be useful when mounting the PULSE display.

This mount is not supplied with this kit, but can be ordered as per the following information:

To order from NORAC: • Contact us at any of the numbers above.

• Part number - 106332

To order from RAM: • Go to www.ram-mount.com or visit your local RAM dealer.

• Part number - RAM-B-224-1U

2Technical Specifications

CAN ICES-3(A)/NMB-3(A)

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct the interference at their

own expense.

This Class A digital apparatus complies with Canadian ICES-003.

Pursuant to EMC Directive – Article 9, this product is not intended for residential use.

Table 1: System Specifications

Supply Voltage (rated)

12VDC

Supply Current (rated)

Hydraulic Pressure (maximum)

3300 psi

Baud Rate 250 kbps

Clock Frequency (maximum)

96 MHz

Solenoid Valve PWM Frequency

300 Hz

Ultrasonic Sensor Transmit Frequency

50 kHz

Operating Temperature Range

0°C to 80°C

3Installation

Ensure the PULSE power switch is OFF for the remainder of the installation

(Bottom of switch pressed IN).

1. Install the PULSE™ display in the cab of the sprayer where it will be clearly visible and

within easy reach of the operator.

2. RAM manufactures a suction cup mount that works well for installing the PULSE display.

The suction cup mount is not supplied with this kit, but is available from NORAC or RAM.

See Section 1.2 for ordering information.

3. Connect the cable from the PULSE display (D01) to one of the 2-way couplers with

terminator (E20) and connect one of the network cables (C01) to the other side of the

coupler.

4. Connect the remaining coupler with terminator (E20) to the free end of the network cable

(C01).

NOTE: Items E20 (2-way coupler with terminator) are white in color.

5. Connect the remaining cable C01 to the other side of the coupler with terminator (E20).

6. Connect the free end of the second network cable (C01) to the Display Bus connector on

the control module (E01). This is the end of the control module that only has one Deutsch

connector.

7. Disconnect the existing cable C01 from the control module. Connect cable C02 to the

control module.

8. Route cable C02 to the hitch and connect the 2-way coupler (E12) between cable C02 and

the existing cable C01. This will serve as the hitch disconnect.

NOTE: Only parts shown in black are included with this kit. Parts shown in blue

are included with the UC5 Spray Height Control System.

Figure 1: PULSE Pull Type Display Kit Parts

4Cable Drawings

4.1 ITEM C01: 43220-01 - CABLE UC5 NETWORK 14 AWG - 1M

4.2 ITEM C02: 43220-03 - CABLE UC5 NETWORK 14 AWG - 3M

Canada

NORAC Systems International Inc.

Phone: (+1) 306 664 6711

Toll Free: 1 800 667 3921

Shipping Address:

3702 Kinnear Place

Saskatoon, SK

S7P 0A6

United States

NORAC, Inc.

Phone: (+1) 952 224 4142

Toll Free: 1 866 306 6722

Shipping Address:

6667 West Old Shakopee Road, Suite 111

Bloomington, MN

55438

Europe

NORAC Europe

Phone: (+33) (0)4 26 47 04 42

Shipping Address:

Rue de l’hermitage

01090 GUEREINS

France

www.norac.ca

Otros manuales para U5

Tabla de contenidos

Otros manuales de Sistema de control de Norac

Norac

Norac SPRA-COUPE 7000 Series Manual de usuario

Norac

Norac PULSE UC5 Manual de uso y cuidado

Norac

Norac UC5 HD12 Manual de usuario

Norac

Norac UC5 Topcon X30 Manual de usuario

Norac

Norac UC7 Manual de usuario

Norac

Norac UC5 Topcon X30 Manual de usuario

Norac

Norac UC5 Topcon X30 Manual de usuario

Norac

Norac UC4.5 Manual de usuario

Norac

Norac UC5 Active Roll Control Manual de usuario

Norac

Norac UC4+ Manual de usuario

Norac

Norac UC5 Rogator 600 Manual de usuario

Norac

Norac UC7 Manual de usuario

Norac

Norac UC4.5 Manual de usuario

Norac

Norac UC7 Manual de usuario

Norac

Norac UC7 Manual de usuario

Norac

Norac UC4.5 Manual de usuario

Norac

Norac Rogator 700 Series Manual de usuario

Norac

Norac UC4.5 Manual de usuario

Norac

Norac UC4+ Manual de usuario

Norac

Norac UC5 CANbus Manual de usuario

Norac

Norac Active Roll Control UC5 Series Manual de usuario

Norac

Norac Case AFS Pro 300 Manual de usuario

Norac

Norac UC5 Topcon X30 Manual de usuario

Norac

Norac UC5 Topcon X30 Manual de usuario

Manuales populares de Sistema de control de otras marcas

Pentair Pool Products

Pentair Pool Products Compool Manual de usuario

ComfortNET

ComfortNET CTK04 Manual de usuario

Fireye

Fireye InSight II 95DSS3 Manual de usuario

CAME

CAME G3000 Manual de usuario

Idemia

Idemia MorphoAccess VP MD Manual de usuario

Axis

Axis P1445-LE-3 Manual de usuario

HEIDENHAIN

HEIDENHAIN TNC 150 B Manual de usuario

CNC-Step

CNC-Step High-Z T-Series Manual de usuario

Doosan

Doosan DVF Series Manual de usuario

Honeywell

Honeywell KAP 140 Manual de usuario

Honeywell

Honeywell vk41 series Manual de usuario

AirBench

AirBench FPW Guía de instalación

Cypress

Cypress HHR-3160 Manual de usuario

CAME

CAME GLT40AOS Manual de usuario

Zonex

Zonex GEN II -VVT Guía del usuario

Altronics

Altronics K 9650 Manual de usuario

micro-trak

micro-trak RoadMaster Manual de usuario

micro-trak

micro-trak Calc-An-Acre II Manual de usuario