2 3
SVENSKASVENSKA Use
Power on/o
Press and hold the Multifunction button (1) for 3 seconds to turn the
headphones on. Press and hold the Multifunction button again to turn the
headphones o.
Pairing
Make sure the headphones are turned o. Press and hold the
Multifunction button (1) for 3 seconds to enter pairing mode. The
Bluetooth LED (2) flashes red and blue. Open the Bluetooth settings on
your device and connect to "Nomadelic Solo 200". The Bluetooth LED
flashes blue after the pairing is successful.
Charging
The charging LED (7) flashes red when the battery level is low. Connect
the USB-C cable to the charging port (8) and a computer or a USB power
adapter to charge the headphones. The charging LED lights up red during
charging and turns blue when fully charged.
Note! If the battery level is low, you can still
use the headphones with a 3.5 mm cable.
Control music
Play/pause music: Press the Multifunction button (1).
Next song: Press and hold the Volume + button (3) for 2 seconds.
Volume up : Press the Volume + button.
Previous song: Press and hold the Volume - button (4) for 2 seconds.
Volume down : Press the Volume - button.
ANC: Press the ANC button (5) to switch between ANC On, hear-through
and ANC o.
Voice assistant: Press and hold the Multifunction button for 2 seconds.
Factory reset: Press and hold the Volume - and + buttons (3, 4).
Control calls
Answer and hang up a call: Press the Multifunction button.
Reject a call: Press and hold the Multifunction button for 2 seconds.
Redial: Double press the Multifunction button.
Auto pause
The headphones are equipped with a light sensor that pauses the music
automatically if the headphones are taken o.
Safety information
This product contains a rechargeable Li-ion battery, and the battery
cannot be replaced. To prevent possible hearing damage, do not listen at
high volume levels for long periods of time.
Specications
Bluetooth: 5.0
Frequency range: 20 Hz - 20 kHz
Playback time, ANC on: 40 h
Playback time, ANC off: 50 h
Charging time: 2.5 h
Noise reduction: 35 dB (±3dB)
Wireless frequency: 2402-2408 MHz
Transmission power: 20 mW (max.)
Before rst use
Make sure the headphones are fully charged.
ENGLISHENGLISH
1
2
3
4
5
7
86
1 Multifunction button
2 Bluetooth LED
3 Volume + /Next track
4 Volume - /Previous track
5 ANC button
6 3.5 mm port
7 Charging LED
8 Charging port
Overview
