Nokia BH-904 Manual de usuario

Nokia Bluetooth Headset BH-904

14 15

ENGLISH

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares that

this HS-101W product is in compliance with

the essential requirements and other

relevant provisions of Directive 1999/5/EC. A

copy of the Declaration of Conformity can be

found at http://www.nokia.com/phones/

declaration_of_conformity/.

Nokia, Nokia Connecting People and the

Nokia Original Accessories logo are

trademarks or registered trademarks of

Nokia Corporation. Nokia tune is a sound

mark of Nokia Corporation. Other product

and company names mentioned herein may

be trademarks or tradenames of their

respective owners.

Reproduction, transfer, distribution, or

storage of part or all of the contents in this

document in any form without the prior

written permission of Nokia is prohibited.

Nokia operates a policy of continuous

development. Nokia reserves the right to

make changes and improvements to any of

the products described in this document

without prior notice.

Bluetooth is a registered trademark of

Bluetooth SIG, Inc.

To the maximum extent permitted by

applicable law, under no circumstances shall

Nokia or any of its licensors be responsible

for any loss of data or income or any special,

incidental, consequential or indirect

damages howsoever caused.

The contents of this document are provided

"as is". Except as required by applicable law,

no warranties of any kind, either express or

implied, including, but not limited to, the

implied warranties of merchantability and

fitness for a particular purpose, are made in

relation to the accuracy, reliability or

contents of this document. Nokia reserves

the right to revise this document or

withdraw it at any time without prior notice.

The availability of particular products may

vary by region. Please check with your Nokia

dealer for details. This device may contain

commodities, technology or software

subject to export laws and regulations from

the US and other countries. Diversion

contrary to law is prohibited.

ENGLISH

Introduction

With the Nokia Bluetooth Headset

BH-904, you can make and answer

calls hands-free with your compatible

mobile device. The headset is provided

with a sliding boom that allows you to

talk at a lower volume or in a noisy

environment. Noise cancellation helps

you handle calls in noisy

environments.

Read this user guide carefully before

using the headset. Also, read the user

guide for the device that you connect

to the headset.

This product may contain small parts.

Keep them out of the reach of small

children.

Note: The surface of this

device does not contain

nickel in the platings. The

surface of this device contains stainless

steel.

Bluetooth wireless technology

Bluetooth wireless technology allows

you to connect compatible devices

without cables. The headset and the

other device do not need to be in line

of sight, but they should be within 10

metres (33 feet) of each other.

Connections may be subject to

interference from obstructions, such

as walls, or other electronic devices.

The headset is compliant with the

Bluetooth Specification 2.1 + EDR

supporting the Headset Profile 1.1 and

Hands-Free Profile 1.5. Check with the

manufacturers of other devices to

determine their compatibility with

this device.

ENGLISH

Get started

The headset contains the following

parts shown on the title page: volume

key (1), sliding boom (2), earpiece (3),

indicator light (4), power key (5),

charger connector (6), mute key (7),

answer/end key (8), and microphones

(9).

Before using the headset, you must

charge the battery and pair the

headset with a compatible device.

Parts of the device are magnetic. Metallic

materials may be attracted to the device.

Do not place credit cards or other

magnetic storage media near the device,

because information stored on them may

be erased.

Charge the battery

Before charging the battery, carefully

read “Battery and charger

information”.

Warning: Use only chargers

approved by Nokia for use

with this particular model.

The use of any other types may invalidate

any approval or warranty, and may be

dangerous. Use of unapproved chargers

may present a risk of fire, explosion, or

other hazard.

When you disconnect the power cord of

any accessory, grasp and pull the plug,

not the cord.

1. Connect the charger to a wall

outlet.

2. Lift the cover of the charger

connector, and connect the

charger cable to it (10). The red

indicator light is displayed during

charging.

Charging the battery fully may take

up 35 minutes with the AC-6

charger. Charging the battery with

ENGLISH

the AC-6 charger for 15 minutes

provides up to 5 hours of talk time.

3. When the battery is fully charged,

the green indicator light is

displayed. Disconnect the charger

from the headset, then from the

wall outlet. Push the cover over the

charger connector.

To charge the headset with a

compatible Nokia charger that has a

2.0 or 3.5 mm charger plug, use the

Nokia Charger Adapter CA-146C (sold

separately).

To charge the battery through the USB

port of a compatible PC, connect one

end of the Nokia Connectivity Cable

CA-101 (sold separately) to the

charger connector and the other end

to the USB port.

The fully charged battery has power

for up to 8 hours of talk time or up to

160 hours of standby time.

To check the battery charge when the

headset is not connected to a charger,

press the power key when the headset

is switched on. If the indicator light is

green, the charge level is sufficient. If

the light is yellow, you may need to

recharge the battery soon. If the light

is red, recharge the battery.

When the battery charge is low, the

headset beeps every 5 minutes and

the red indicator light flashes.

Switch on or off

To switch on, press and hold the power

key for about 2 seconds. The headset

beeps, and the green indicator light is

displayed. The headset tries to

connect to one or two last connected

devices. When the headset is

connected to a device and is ready for

use, the blue indicator light flashes

slowly. If the headset has not been

paired with a device, it automatically

enters pairing mode.

ENGLISH

To switch off, press and hold the

power key for about 2 seconds. The

headset beeps, and the red indicator

light is briefly displayed. If the headset

is not connected to a device within 30

minutes, it switches off automatically.

Pair and connect the headset

Before using the headset, you must

pair and connect it to a compatible

device.

You can pair the headset with up to

eight devices, but you can connect it

to only up to two devices at a time.

1. Ensure that your mobile device is

switched on and the headset is off.

2. If the headset has not been

previously paired with a device,

switch on the headset. The headset

enters pairing mode, and the blue

indicator light starts to flash

quickly.

If the headset has been previously

paired with a device, ensure that

the headset is switched off, and

press and hold the power key for

about 5 seconds until the blue

indicator light starts to flash

quickly.

3. Activate the Bluetooth feature on

your device, and set it to search for

Bluetooth devices. For details, see

the user guide of your device.

4. Select the headset from the list of

found devices.

5. If necessary, enter the passcode

0000 to pair and connect the

headset to your device.

In some devices, you may need to

make the connection separately

after pairing.

When the headset is connected to at

least one device and is ready for use,

the blue indicator light flashes slowly.

ENGLISH

To manually connect the headset to

one or two last used devices, press and

hold the answer/end key for about 2

seconds (when no devices are

connected), or make the connection in

the Bluetooth menu of the desired

device. If you have a device connected

to the headset and want to connect a

second device, make the connection in

the Bluetooth menu of the device.

You may be able to set your device so

that the headset connects to it

automatically. To activate this feature

in a Nokia device, change the paired

device settings in the Bluetooth menu.

Basic use

Change the earplug

The headset may be provided with

different sized earplugs. Select the

earplug that fits the best and is the

most comfortable for your ear.

To change the earplug, pull the

current earplug from the earpiece (11),

and push the new earplug into place

(12).

Place the headset on the ear

Place the headset over your ear in a

comfortable position, and slide it

downwards (13). Gently push the

earpiece into your ear. Point the

headset toward your mouth.

Sliding boom

The sliding boom brings the

microphone closer to your mouth,

which improves the audio quality

when you talk at a lower volume or in

ENGLISH

a noisy environment. You can use the

boom to answer or end a call.

To use the boom, gently pull it down

toward your mouth (14), or push it up

to its initial position (15).

Adjust volume

The headset automatically adjusts the

volume according to ambient noise. To

manually adjust the volume, slide the

volume key up or down. To adjust the

volume quickly, slide and hold the key.

The selected volume level is saved for

the device that you currently use with

the headset.

Calls

To make a call, use your mobile device

in the normal way when the headset is

connected to it.

To redial the number you last called (if

your mobile device supports this

feature with the headset), when no

call is in progress, press the answer/

end key twice.

To activate voice dialling (if your

mobile device supports this feature

with the headset), when no call is in

progress, press and hold the answer/

end key for about 2 seconds. Proceed

as described in the user guide of the

mobile device.

To answer a call, pull the boom

completely down toward your mouth,

or press the answer/end key. (For noise

cancellation, the boom has to be

completely pulled down.) To reject a

call, press the answer/end key twice.

To end a call, push the boom up to its

initial position, or press the answer/

end key.

To mute the microphone, slide the

mute key toward your mouth. To

unmute the microphone, slide the

mute key to the opposite direction.

ENGLISH

When you mute or unmute the

microphone, the headset beeps twice.

To switch a call between the headset

and a compatible connected device,

press and hold the answer/end key for

about 2 seconds.

Allow connection to two

devices

You can have the headset connected

to two devices at the same time.

By default, the headset can only be

connected to one device at a time. To

allow the headset to connect to two

devices, switch off the headset, and

press and hold the power key, and

slide and hold the volume key up for

about 5 seconds. The blue indicator

light flashes twice.

To allow the headset to connect to

only one device, switch off the

headset, and press and hold the power

key, and slide and hold the volume key

down for about 5 seconds. The green

indicator light flashes twice.

If the headset can connect to two

devices at the same time and you use

redialling or voice dialling, the call is

made on the device that you last used

to make a call when the headset was

connected to it.

Clear settings or reset

To clear all the pairing settings from

the headset, switch off the headset,

and press and hold the power key and

the answer/end key at the same time

for about 5 seconds. The headset

beeps twice, and the red and green

indicator lights alternate. After the

settings are cleared, the headset

enters pairing mode.

To reset the headset if it stops

functioning, even though it is charged,

connect the headset to a charger, and

press the power key and the answer/

end key at the same time.

Otros manuales para BH-904

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Auriculares de Nokia

Nokia

Nokia BH-504 Manual de usuario

Nokia

Nokia BH 604 - Headset - Binaural Manual de usuario

Nokia

Nokia BH-218 Manual de usuario

Nokia

Nokia HS-2R - Personal Radio Manual de usuario

Nokia

Nokia BH-216 Manual de usuario

Nokia

Nokia Bluetooth Headset BH-701 Manual de usuario

Nokia

Nokia BH-801 - Headset - Over-the-ear Manual de usuario

Nokia

Nokia BH 212 - Headset - Over-the-ear Manual de usuario

Nokia

Nokia BH-106 Black Manual de usuario

Nokia

Nokia BH 213 - Headset - Over-the-ear Manual de usuario

Nokia

Nokia BH-500 Manual de usuario

Nokia

Nokia BH-222 Manual de usuario

Nokia

Nokia LPS-4 Manual de usuario

Nokia

Nokia BH 301 - Headset - Over-the-ear Manual de usuario

Nokia

Nokia BH-106 Black Manual de usuario

Nokia

Nokia BH 102 - Headset - Over-the-ear Manual de usuario

Nokia

Nokia BH-106 Black Manual de usuario

Nokia

Nokia BH-905 Manual de usuario

Nokia

Nokia BH-700 Manual de usuario

Nokia

Nokia BH-110 Manual de usuario

Nokia

Nokia BH-900 Manual de usuario

Nokia

Nokia BH-904 Manual de usuario

Nokia

Nokia DVB-H Manual de usuario

Nokia

Nokia HS HS 4W Manual de usuario

Manuales populares de Auriculares de otras marcas

Sena

Sena SMH10 Manual de usuario

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manual de usuario

Sennheiser

Sennheiser EPOS ADAPT 230 Manual de usuario

Doro

Doro Flexus HS2005 Manual de usuario

GE 98971 Manual de usuario

Hama

Hama 00184070 Manual de usuario

Plantronics

Plantronics Blackwire 3200 Series Manual de usuario

Blue Tiger

Blue Tiger Advantage PLUS Manual de usuario

Jawbone

Jawbone Icon Manual de usuario

Jabra

Jabra FR 20 Manual de usuario

Roxcore

Roxcore Flow A+ Manual de usuario

Turtle Beach

Turtle Beach XP 510 Manual de usuario

Philips

Philips SHB6101 Manual de usuario

Jabra

Jabra PRO 9460 Duo Manual de usuario

HyperX

HyperX HyperX Cloud Flight Manual de usuario

Bose

Bose MIE2 Mobile Manual de usuario

Jabra

Jabra Steel Manual de usuario

HyperX

HyperX cloud ii Manual de usuario