Nokia RM-1025 Manual de usuario
Quick Guide
Nokia XXX
Issue 1 EN RM-1025
Psst...
This guide isn't all there is...
There's a user guide in your phone – it's always
with you, available when needed. On the start
screen, tap Care.
For the online user guide, even more info, and
troubleshooting help, go to www.nokia.com/
support.
The instructions in this user guide are based on
the latest available software version. If your
device has not been updated to the latest
available software, there may be differences in
the availability and functionality of some
features.
For info about writing text on your phone, see the
user guide in your phone or the online user guide.
For info on Microsoft Mobile Service terms and
Privacy policy, go to www.nokia.com/privacy.
Contents
For your safety 3
Get started 5
Keys and parts 5
Insert SIM, battery and memory card 6
Charge the battery 9
Copy contacts from your old phone 9
2
Basics 10
Explore your phone 11
Switch between views 13
Find your favourites 14
Change settings quickly 15
Switch Glance screen on 16
Camera 16
Take a photo 16
Phone management & connectivity 17
Connect your computer to the web 17
Sync your content with an Android phone 17
Find your model number and serial
number (IMEI) 18
Product and safety info 18
MANUFACTURER’S LIMITED WARRANTY 28
NOKIA — MANUFACTURER’S LIMITED
WARRANTY 32
For your safety
We invite you to read the instructions on this guide before using the
device.
SWITCH OFF IN RESTRICTED AREAS
Switch the device off when mobile phone use is not allowed or
when it may cause interference or danger, for example, in
aircraft, in hospitals or near medical equipment, fuel, chemicals, or
blasting areas. Obey all instructions in restricted areas.
3
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the
vehicle while driving. Your first consideration while driving
should be road safety.
INTERFERENCE
All wireless devices may be susceptible to interference, which
could affect performance.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
BATTERIES, CHARGERS, AND OTHER ACCESSORIES
Use only batteries, chargers, and other accessories approved
by Microsoft Mobile for use with this device. Do not connect
incompatible products.
KEEP YOUR DEVICE DRY
Your device is not water-resistant. Keep it dry.
PROTECT YOUR HEARING
To prevent possible hearing damage, do not listen at high
volume levels for long periods. Exercise caution when holding
your device near your ear while the loudspeaker is in use.
SAR
This device meets RF exposure guidelines when used either in
the normal use position against the ear or when positioned at
least 1.5 centimetres (5/8 inch) away from the body. The specific
maximum SAR values can be found in the Certification Information
(SAR) section of this user guide. For more info, go to www.sar-
tick.com.
When a carry case, belt clip or other form of device holder is used for
body-worn operation, it should not contain metal and should provide
at least the above-stated separation distance from the body. Note
that mobile devices may be transmitting even if you are not making
a voice call.
4
Get started
Get started with the basics, and have your phone
up and running in no time.
Keys and parts
Explore the keys and parts of your new phone.
1Micro-USBconnector
2 Audio connector (3.5 mm)
3Earpiece
4 Volume/Zoom keys
5 Lock/Power key
6 Back key
7Endkey
5
8 Microphone
9Scrollkey
10 Call key
11 Options key
12 Screen
13 Camera lens. Before using the camera,
remove the protective tape from the lens.
14 Antenna area
15 Speaker
Avoid touching the antenna area while the
antenna is in use. Contact with antennas affects
the communication quality and may reduce
battery life due to higher power level during
operation.
Do not connect to products that create an output
signal, as this may damage the device. Do not
connect any voltage source to the audio
connector. If you connect an external device or
headset, other than those approved for use with
this device, to the audio connector, pay special
attention to volume levels.
Some of the accessories mentioned in this user
guide, such as charger, headset, or data cable,
may be sold separately.
Insert SIM, battery and memory card
Learn how to insert a battery and SIM and memory
cards.
6
Important: Your device uses a micro-SIM
card, also known as a mini-UICC SIM card.
Use of incompatible SIM cards, or use of SIM
card adapters, may damage the card or the
device, and may corrupt data stored on the
card.
Use only compatible memory cards approved for
use with this device. Incompatible cards may
damage the card and the device and corrupt data
stored on the card.
1. Place your finger on the logo and gently lift the
back cover.
2. If the battery is in the phone, lift it out.
3. Open the SIM holder, and slide the SIM into the
holder. Close the holder, and lock it into place.
Make sure the SIM contact area is face down.
7
4. Insert the memory card into the memory card
holder. Close the holder, and lock it into place.
Tip: To remove the memory card, unlock the
holder, then pull the memory card out.
5. Line up the battery contacts, and push the
battery in.
6. Replace the back cover.
7. To switch your phone on, press and hold the
power key until the phone vibrates.
Note: Switch the device off and disconnect
the charger and any other device before
removing any covers. Avoid touching
electronic components while changing any
covers. Always store and use the device with
any covers attached.
8
Charge the battery
Your battery has been partially charged at the
factory, but you may need to recharge it before
you can use your phone.
1. Plug the charger into a wall outlet.
2. Connect the charger to the phone. When done,
unplug the charger from the phone, then from the
wall outlet.
If the battery is completely discharged, it may
take up to 20 minutes before the charging
indicator is displayed.
Tip: You can use USB charging when a wall
outlet is not available. Data can be
transferred while charging the device. The
efficiency of USB charging power varies
significantly, and it may take a long time for
charging to start and the device to start
functioning.
Make sure your computer is switched on.
Copy contacts from your old phone
Get all your contacts to your new phone in one go.
9
Your old phone must have Bluetooth, and the
contacts must be stored in the phone memory,
not on the SIM.
1. On both your new and old phone, switch
Bluetooth on, and make sure both phones are
visible to others.
2. On your new phone, select People, press the
options key, and select Import contacts >
Another phone.
Tip: If you already have contacts on your
phone, select People, press the options
key, and select Import and export > Another
phone.
3. Move the phones close to each other. When the
phones are connected using Bluetooth, the
contacts transfer starts.
If your contacts are written in a language that is
not supported by your new phone, the contact
info may not show correctly.
Tip: If you have an Android phone, you can
keep your contacts and text messages in
sync on both your phones using the Sync
app. Switch on Bluetooth on your Android
phone, and select Sync on your new
phone.
Basics
Learn how to get the most out of your new phone.
10
Tabla de contenidos
Otros manuales de Teléfono móvil de Nokia
Nokia
Nokia E60 Manual de usuario
Nokia
Nokia 600 Manual de usuario
Nokia
Nokia TA-1484 Manual de usuario
Nokia
Nokia X3 Guía de inicio rápido
Nokia
Nokia 5530 - XpressMusic Smartphone 70 MB Manual de usuario
Nokia
Nokia 6101 - Cell Phone 4.4 MB Manual de usuario
Nokia
Nokia 3300 - Cell Phone - GSM Manual de usuario
Nokia
Nokia 3310 Manual de usuario
Nokia
Nokia iSkoot 6600 Manual de usuario
Nokia
Nokia E70 Manual de usuario
Nokia
Nokia 7110 - Cell Phone - GSM Manual de usuario
Nokia
Nokia 700 Manual de usuario
Nokia
Nokia 6820 - Cell Phone - GSM Manual de usuario
Nokia
Nokia 3660 Manual de usuario
Nokia
Nokia Lumia 520 Guía de inicio rápido
Nokia
Nokia Lumia 710 Manual de usuario
Nokia
Nokia 6630 - Smartphone 10 MB Manual de usuario
Nokia
Nokia 6260 - Smartphone 6 MB Manual de servicio
Nokia
Nokia RM-376 Manual de usuario
Nokia
Nokia SLIDE 6700 Manual de usuario
