Noble UH30-E Guía de configuración

INSTALLATION, OPERATION,

AND SERVICE MANUAL

NOBLE UH30-E

UH30-E Manual • 07610-004-45-09-D

NOBLE UNDERCOUNTER DISHMACHINES

REVISION HISTORY

Revision

Letter

Revision

Date Made by Applicable ECNs Details

A 4-27-17 JH N/A Initial release of the manual.

B 9-6-17 JH 8532

Updated depiction of the air-gap on pg. 6.

Removed references to "screen" on pg. 20.

Added communication cable (05700-004-33-64) to pg. 23.

Corrected chemical tubes on pg. 25 and added tube length and color.

Removed ll line (05700-002-62-37) from wash hub on pg. 30.

Replaced 7/8" discharge hose with 5/8" discharge hose (05700-004-46-28) on pg. 31.

Updated view of inlet plumbing on pg. 34 to show angle of elbow and adapter.

Updated schematic to revision E.

C 1-19-18 JH 8537

8574

Added the UH30-E-SEER to the manual.

Updated the Door Assembly pages.

Added item #10 on pg. 48.

Corrected P/N for item #10 on pg. 52.

D 2-7-19 JH

8585

8599

8619

8648

Added PRV to view on pg. 3.

Added note about hot water heates to pg. 7.

Added motor rotation section to pg. 9.

Added programming instructions and fault codes to pgs. 22-26.

Updated P/N for item #2 on pg. 29.

Updated pg. 31 to show panel and membrane together.

Added item #14 on pg. 33.

Updated item #11 on pg. 40.

Added Door Interlock to pg. 41.

Changed rinse arm bearing assembly on pg. 44.

Changed rinse arm bearing kit P/N on pg. 44.

Updated SEER plumbing, pgs. 48-49.

Added note about water connection point to pg. 48.

Updated pgs. 54-55.

Added back panel and gaskets to pg. 56.

Added new drain water tempering kit and 460 V drain water tempering kit to pg. 57.

Updated schematics on pgs. 58-59.

UH30-E

Undercounter dishmachine; high-temperature, hot-water

sanitizing, with a booster tank and detergent

and rinse-aid chemical feeder pumps.

UH30-E-SEER

Undercounter dishmachine; high-temperature, hot-water

sanitizing, with a booster tank and detergent

and rinse-aid chemical feeder pumps. Equipped with Steam

Elimination and Energy Recovery System (SEER).

The manufacturer provides

technical support for all of

the dishmachines detailed

in this manual. We strongly

recommend that you refer to

this manual before making a

call to our technical support

sta󰀨. Please have this manual

open when you call so that our

sta󰀨 can refer you, if necessary,

to the proper page. Technical

support is not available on

holidays.

Contact technical support toll

free at 1-888-800-5672.

Technical support is available

for service personnel only.

NOMENCLATURE

TABLE OF CONTENTS

GUIDES

Symbols............................................................................................................................................ 1

Abbreviations & Acronyms ............................................................................................................... 1

SPECIFICATIONS

UH30-E Dimensions......................................................................................................................... 2

UH30-E-SEER Dimensions.............................................................................................................. 3

UH30-E Operating Parameters ........................................................................................................ 4

UH30-E-SEER Operating Parameters ............................................................................................. 5

Electrical Requirements ................................................................................................................... 6

INSTRUCTIONS

Installation Instructions..................................................................................................................... 7

Inspection......................................................................................................................... 7

Unpacking........................................................................................................................ 7

Plumbing.......................................................................................................................... 7

Water Supply Connections .............................................................................................. 7

Pressure Regulator.......................................................................................................... 8

Shock Absorber ............................................................................................................... 8

Connecting the Drain Line ............................................................................................... 8

Plumbing Check............................................................................................................... 8

Electrical Power Connections .......................................................................................... 9

Motor Rotation ................................................................................................................. 9

Voltage Check................................................................................................................ 10

Surrounding Area........................................................................................................... 10

Temperature Setpoints................................................................................................... 10

Leveling.......................................................................................................................... 10

Chemical Feeder Equipment ......................................................................................... 10

Preparing Chemical Feeder Pumps................................................................................11

Priming Chemical Feeder Pumps ...................................................................................11

Programming Chemical Feeder Pumps......................................................................... 12

Operating Instructions .................................................................................................................... 13

Preparation .................................................................................................................... 13

Power Up ....................................................................................................................... 13

Filling the Wash Tub ...................................................................................................... 13

Ware Preparation........................................................................................................... 14

Washing a Rack of Ware ............................................................................................... 14

Operational Inspection................................................................................................... 16

Shutdown & Cleaning .................................................................................................... 16

Deliming......................................................................................................................... 18

Detergent Control........................................................................................................... 19

iii

TABLE OF CONTENTS

MAINTENANCE

Preventative Maintenance.............................................................................................................. 20

TROUBLESHOOTING

Programming.................................................................................................................................. 22

Fault Codes .................................................................................................................................... 24

Troubleshooting.............................................................................................................................. 27

PARTS

Terminal Block Box, 208/230 V ...................................................................................................... 29

Terminal Block Box, 460 V ............................................................................................................. 30

Control Kick Panel.......................................................................................................................... 31

UH30-E Electrical Panel, 208/230 V .............................................................................................. 32

UH30-E Electrical Panel, 460 V ..................................................................................................... 33

UH30-E-SEER Electrical Panel, 208/230 V ................................................................................... 34

UH30-E-SEER Electrical Panel, 460 V .......................................................................................... 35

Chemical Feeder Pumps................................................................................................................ 36

Door................................................................................................................................................ 38

Miscellaneous Door Components .................................................................................................. 40

UH30-E-SEER Door Interlock ........................................................................................................ 41

Wash & Motor................................................................................................................................. 42

Rinse Manifold................................................................................................................................ 44

Plumbing Options ........................................................................................................................... 45

UH30-E Plumbing........................................................................................................................... 46

UH30-E-SEER Plumbing................................................................................................................ 48

Rinse Plumbing .............................................................................................................................. 50

Rinse Tank...................................................................................................................................... 52

SEER System................................................................................................................................. 54

Stands & Panels............................................................................................................................. 56

Miscellaneous Parts ....................................................................................................................... 57

SCHEMATICS

208/230 V, 50/60 Hz, 1 Phase ....................................................................................................... 58

460 V, 60 Hz, 3 Phase ................................................................................................................... 59

07610-004-45-09-D

GUIDES

SYMBOLS

ABBREVIATIONS & ACRONYMS

ANSI - American National Standards Institute

GHT - Garden Hose Thread

GPG - Grains per Gallon

GPM - Gallons per Minute

HP - Horse Power

Hz - Hertz

ID - Inside Diameter

kW - Kilowatts

NFPA - National Fire Protection Association

NPT - National Pipe Thread

OD - Outside Diameter

PRV - Pressure Regulating Valve

PSI -Pounds per Square Inch

V- Volts

CAUTION

WARNING

NOTICE

- Risk of Injury to Personnel

- Risk of Damage to Equipment

- Risk of Electrical Shock

- Lockout Electrical Power

- Reference Data Plate

- Important Note

- Caustic Chemicals

 - Instructions Hyperlink

07610-004-45-09-D 2

SPECIFICATIONS UH30-E DIMENSIONS

1/4

[7 mm]

[660 mm]

3 1/2

[88 mm]

24 1/4

[615 mm]

3 3/8

[87 mm]

9 3/4

[246 mm]

[202 mm]

BACK

SIDEFRONT

TOP

14 1/4

[363 mm]

7 1/2

[190 mm]

3 7/8

[99 mm]

6 5/8

[169 mm]

[76 mm]

42 3/4

[1087 mm]

16 3/4

[426 mm]

DOOR OPEN

33 5/16

[846 mm]

14 1/4

[362 mm]

CLEARANCE

LEGEND

A - Electrical Connection

B - Water Inlet (with 6' Hose)

(3/4" Male GHT, connect to true

1/2" ID line, 40-90 °F)

C - Drain Connection

(1" ID, 1 3/8" OD)

(Connect to MIN 1 1/2" Drain with Air-gap)

D - Chemical Port

All dimensions from the floor can be increased 1” using the machine’s adjustable feet.

LEGEND

A - Electrical Connection

B - Water Inlet (with 6' Hose)

(3/4" Male GHT, connect to true

1/2" ID line, 40-90 °F)

All dimensions from the oor can be increased 1" using the machine's adjustable feet.

C - Drain Connection

(1" ID, 1 3/8" OD)

(Connect to MIN 1 1/2" Drain with Air-gap)

D - Chemical Port

07610-004-45-09-D

SPECIFICATIONS UH30-E-SEER DIMENSIONS

LEGEND

A - Electrical Connection

B - Water Inlet (with 6' Hose)

(3/4" Male GHT, connect to true

1/2" ID line, 40-90 °F)

All dimensions from the oor can be increased 1" using the machine's adjustable feet.

C - Drain Connection

(1" ID, 1 3/8" OD)

(Connect to MIN 1 1/2" Drain with Air-gap)

D - Chemical Port

17 1/2

[445 mm]

BACK

SIDEFRONT

TOP

1/4

[7 mm]

26 7/8

[692 mm]

3 1/2

[88 mm]

24 1/4

[615 mm]

3 3/8

[87 mm]

4 3/8

[110 mm]

14 1/4

[363 mm]

7 1/2

[190 mm]

1 3/4

[44 mm]

[152 mm]

[76 mm]

43 5/8

[1108 mm]

16 3/4

[426 mm]

DOOR OPEN

33 5/16

[846 mm]

14 1/4

[362 mm]

CLEARANCE

LEGEND

A - Electrical Connection

B - Water Inlet (with 6' Hose)

(3/4" Male GHT, connect to true

1/2" ID line, 40-90 °F)

C - Drain Connection

(1" ID, 1 3/8" OD)

(Connect to MIN 1 1/2" Drain with Air-gap)

D - Chemical Port

All dimensions from the floor can be increased 1” using the machine’s adjustable feet.

07610-004-45-09-D 4

UH30-E

Operating Capacity:

Racks per Hour 27

Dishes per Hour 675

Glasses per Hour 972

Tank Capacity (Gallons):

Wash Tank 3

Rinse Tank 1.66

Always refer to the machine data plate for specic electrical and water

requirements. The material provided on this page is for reference only and

is subject to change without notice.

Water Temperatures (°F):

Minimum Wash Temperature 155

Minimum Rinse Temperature 180

Minimum Incoming Water Temperature 110

Other Water Requirements:

Water Flow Pressure (PSI) 10

Flow Rate Minimum (GPM) 5.16

Water Line Size (NPT) 3/4" Male GHT

Connect to true 1/2" ID Line

Drain Line Size (NPT) 1" ID

1 3/8" OD

Connect to MIN 1 1/2" Drain with

Air-gap

UH30-E OPERATING PARAMETERS

SPECIFICATIONS

NOTICE

Incoming water is from a

"hot" water line.

07610-004-45-09-D

UH30-E-SEER

Operating Capacity:

Racks per Hour 20

Dishes per Hour 500

Glasses per Hour 720

Tank Capacity (Gallons):

Wash Tank 3

Rinse Tank 1.66

Always refer to the machine data plate for specic electrical and water

requirements. The material provided on this page is for reference only and

is subject to change without notice.

Water Temperatures (°F):

Minimum Wash Temperature 155

Minimum Rinse Temperature 180

Minimum Incoming Water Temperature 40

Maximum Incoming Water Temperature 90

Other Water Requirements:

Water Flow Pressure (PSI) 10

Flow Rate Minimum (GPM) 5.16

Water Line Size (NPT) 3/4" Male GHT

Connect to true 1/2" ID Line

Drain Line Size (NPT) 1" ID

1 3/8" OD

Connect to MIN 1 1/2" Drain with

Air-gap

NOTICE

UH30-E-SEER OPERATING PARAME-

SPECIFICATIONS

Incoming water is from a

"cold" water line.

Tabla de contenidos

Otros manuales de Lavavajillas de Noble

Noble

Noble HT-180EC Guía de configuración

Noble

Noble HT-180 HH Guía de configuración

Noble

Noble CG-115 Manual de usuario

Noble

Noble HT-180 Series Manual de usuario

Noble

Noble HT-180 HH Guía de configuración

Noble

Noble 495HTGW22 Manual de usuario

Noble

Noble UH30 Manual

Noble

Noble CG-1200 Guía de configuración

Noble

Noble DG-E Manual

Manuales populares de Lavavajillas de otras marcas

Electrolux

Electrolux ESI5211LOX Manual de usuario

KitchenAid

KitchenAid KUDB230B Manual de usuario

Brandt

Brandt BDJ424DB Manual de usuario

Asko

Asko DSD767UXXL.AU Manual de usuario

Beko

Beko DFN26210W Manual de usuario

NEFF

NEFF S153ITX00E Hoja de especificaciones

Midea

Midea SV 4.45 wi Manual de usuario

LG LDF7932 Manual de usuario

Gorenje

Gorenje GV63214 Manual de usuario

Hotpoint

Hotpoint HDA1100ZWH Manual de servicio

Blomberg

Blomberg LDFN2240W Manual de usuario

AEG

AEG FFB83836PM Manual de usuario

Cylinda

Cylinda DM3220RFD Manual de usuario

Atag

Atag DW8214MB Manual de usuario

GE GLD8000 Series Manual de usuario

Siemens

Siemens SN23HI02KE Hoja de especificaciones

Omega

Omega ODW717X Manual de usuario

BORETTI

BORETTI BVW-683 Manual de usuario