4
English
Română
during operaon. To avoid being burnt, do not touch the inverter
during before touching it.
• Ensure children are kept away from inverters.
• Don’t open the front cover of the inverter. A part from performing
work at the wiring terminal (as instructed in this manual), touching
or changing components without authorizaon may cause injury to
people, damage to inverters and annulment of the warranty
• Stac electricity may damage electronic components. Appropriate
method must be adopted to prevent such damage to the inverter;
otherwise the inverter may be damaged and the warranty annulled.
• Ensure the output voltage of the proposed PV array is lower than
the maximum rated input voltage of the inverter; otherwise the
inverter may be damaged and the warranty annulled.
• When exposed to sunlight, the PV array generates dangerous high
DC voltage. Please operate according to our instrucons, or it will
result in danger to life.
• PV modules should have an IEC61730 class A rang.
• If the equipment is used in a manner not specied by the
manufacturer, the protecon provided by the equipment may be
impaired.
• Completely isolate the inverter before maintaining. Completely
isolate the inverter should: Switch o the PV switch, disconnect
the PV terminal, disconnect the baery terminal, and disconnect
the AC terminal.
• Prohibit to insert or pull the AC and DC terminals when the
inverter is running.
• Don’t connect ESS inverter in the following ways:
• EPS Port should not be connected to grid;
• The single PV panel string should not be connected to two or more
inverters.
