Nixeus NX-VUE30 Manual de usuario
Nixeus Technology, Inc
Nixeus Vue 30" IPS 2560x1600 Monitor
(NX-VUE30)
Important Note:
Please make sure your computer hardware graphics card supports the Nixeus Vue 30" IPS Monitor. Some devices and
connections may not be able to support the full 2560x1600 resolution. If you are not sure, please contact your computer
hardware's manufacturer. Please read this manual before using the Nixeus Vue 30" NX-VUE30 with your computer. It
contains important information regarding use and care of IPS Monitors.
Safety and Maintenance:
1) Do not expose the monitor to direct sunlight. Keep the monitor away from a stove or any other heat source.
2) Remove or secure any objects that may fall into the monitor's vents. Do not obstruct or block the cooling vents of the
monitor.
3) Don't jam the vents on the enclosure.
4) When setting up the monitor for use, please ensure the power plug and socket are easy to insert and extract.
6) Please use only approved power line and power adapters provided by Nixeus. If any power connections are missing,
please contact Nixeus for a replacement. Using un-authorized power connectors may damage your monitor and void your
warranty.
7) During operation, please do not throw objects and take care to avoid collision with the monitor. Do not over-clock or
modify the monitor's decoder board. Please do not apply excessive force to the LCD panel or drop the monitor. Warranty
does not cover physical damages, over-clocking, and modifications to the monitor.
8) When monitor is not in use for a long period of time, please disconnect the power plug.
9) When using slightly wet cloth or LCD cleaners to clean the monitor, please disconnect the power adapter. Do not use
organic solvent, alcohol, or ammonia liquid to clean the monitor.
10) Do not store or use monitor in hot, direct sunlight, or in a cold environment. To avoid electrical shock and to prevent
monitor damage; do not use the monitor in dusty, rain, wet, and humid conditions. If monitor gets wet, please wipe clean
with soft dry cloth as soon as possible. If foreign objects or liquids get into the monitor, please disconnect power adapter
immediately. For service please contact Nixeus Technical support for service and repair at [email protected]
11) To ensure long life and best performance of the monitor, please use the monitor in these safe and optimum
conditions: Temperature = 0-40 degrees Celsius (32-95 degrees Fahrenheit), Humidity = 20-80% RH
Avoiding Image Persistence, Incidental Image or After Image:
1) When the monitor is on and unattended, please use a moving screen saver. If there is a static (non moving image) on
the screen, please refresh regularly or start an application to start using the screen.
2) Long time continuous display of static images may case a "brand" on the screen; this is also cal "image persistence" or
"incidental image" or "after image." "Brand," "incidental image" or "after image" is a common phenomenon of LCD
Panel Technology. In most cases, after turning off the power supply for a certain amount of time the "brand," "incidental
image” or "after image" will gradually disappear. Also by displaying a pure white image for the entire screen for the same
duration that you had the static image that caused the image persistence may remove the image persistence. Please
contact Nixeus if you need assistance in removing image persistence.
CAUTION: Serious "brand," "incidental image" or "after image" will not disappear and cannot be repaired. This type of
damage is not covered by warranty. Please take good care of your monitor to prevent serious "brand," "incidental image"
or "after image."
If your monitor needs replacement parts, warranty service, and repairs please do not attempt to do it yourself! Doing so
may void the warranty. Please contact techsupport@nixeus.com for warranty support. For more information please
visit www.nixeus.com
Box Contents:
Nixeus Vue 30" IPS 2560x1600 Monitor (NX-VUE30)
Stand Base x 1 (with 4 screws)
Dual Link DVI-D Cable x 1
Power Adapter & Power Cable x 1
3.5mm Audio Auxiliary Cable x 1
NX-VUE30 Quick Start Guide
Installing Base Stand: (Tools needed – Philips Screw Driver)
Carefully lay the monitor on its' back on a static free, clean, flat surface. Connect base to stand and line up connection
holes. With the four connection screws provided, secure base to stand.
Input and Connection Ports
DisplayPort (DP), VGA, Dual Link DVI, and HDMI
Note: HDMI 1.4 and VGA do not support full 2560x1600 @ 60Hz
NX-VUE30 Power Cable and Power Supply Switch:
Only use the power cable included with the NX-VUE30. Using any other
un-authorized power adapters may damage your monitor and void your warranty.
Connect the power cable to internal power supply on the back of the monitor (make sure power switch is off before
connecting the cable).
Next use the ON/OFF switch to turn on the internal power supply.
OFF Position ON Position
To turn on the monitor press the "Power" Button shown here:
Monitor Swivel Left/Right:
Make sure the NX-VUE30 is on a stable level surface. Holding the left and right bezel with your hand, carefully adjust
monitor left or right to desired orientation.
Monitor Tilting Foward/Back:
Use both hands, hold the top and bottom or right and left to tilt the monitor as shown in the pictures.
ON SCREEN DISPLAY (OSD)
For the On Screen Display to be visible on the monitor, a video signal must be transmited to the monitor from your
PC/MAC.
The six buttons you will use to navigate the On Screen Display (OSD) are "AUTO," "MENU," "VOL+," "VOL-," "UP,"
and "DOWN." These buttons can be found on the bottom right corner under the bezel with their corosponding logos.
NOTE: For On Screen Display (OSD) Navigation: The "MENU" button also functions as an "ENTER" or "OK" button
and the " AUTO" button functions as a "BACK" or "RETURN" button.
The On Screen Display feature that allows the user to adjust monitor settings without relying on a PC or Mac's software.
OSD SETTING Sub-Menu:
One of the first things you should do is to adjust the On Screen Display settings to your preference.
1) To bring up the OSD menu, first press the MENU button then press the DOWN button to navigate down to OSD
SETTING.
2) Next press the MENU button and you will highlight the word LANGUAGE in red. (NOTE: The MENU button also
acts like an "ENTER" or "OK" button).
3) Next press the "MENU" button to access the Language selection.
4) Then press the UP or DOWN buttons to highlight your preferred language and press the MENU button to
select/activate your language.
If you want to adjust the horizontal placement of the OSD MENU on your monitor;
1) Press the DOWN or the UP button to navigate and highlight OSD H. POS then press MENU to highlight the progress
bar.
2) Use the VOL+ and VOL- buttons to adjust the value for your desired settings. Once you have customized your
selection, press the MENU or AUTO button.
The same steps can also be performed to adjust the vertical placement of the OSD MENU by navigating to the OSD V.
POS and adjusting the progress bar.
The default duration of the OSD MENU before it automatically disappears is 10 seconds.
1) To adjust this setting, in the OSD SETTING sub menu, use the UP or DOWN button to scroll down to OSD TIMER
and press menu to highlight the progress bar.
2) Then use the VOL+ or VOL- buttons to adjust the time for the OSD MENU. If you choose 60 seconds, but you don't
need that much time, you don't have to wait for the OSD to automatically disappear. You can always just press the AUTO
button to make the OSD menu disappear after you are finished with making adjustments.
You also can adjust the transparency of the OSD menu.
1) To do this, go to the OSD SETTING sub-menu and navigate down to TRANSPARENCY.
2) Press MENU to highlight the progress bar and use VOL+ and VOL- buttons to adjust your preferred settings. Once
you finish you may press the AUTO button twice to exit out of the OSD MENU.
BRIGHTNESS Sub-Menu:
To adjust the settings in the BRIGHTNESS Sub-Menu, first press the MENU button bring up the OSD, then press MENU
again to access the BRIGHTNESS Sub-Menu.
1) To adjust the monitor's brightness, use the UP and DOWN buttons to navigate to BRIGHTNESS then press the MENU
button to highlight the progress bar.
2) Next use the VOL+ or VOL- buttons to adjust your preferred brightness settings.
3) Once you have selected your preferred brightness settings, press the MENU or AUTO button to exit out of the progress
bar.
1) To adjust the Contrast Ratio, in the BRIGHTNESS Sub-Menu, use the UP/DOWN buttons to navigate to CONTRAST
2) Then press the MENU button to select CONTRAST to adjust the progress bar to your preferred contrast ratio settings.
Tabla de contenidos
Otros manuales de Monitor de Nixeus
Nixeus
Nixeus NX-EDG34S Manual de usuario
Nixeus
Nixeus Vue NX-VUE22 Manual de usuario
Nixeus
Nixeus NX-VUE27C Manual de usuario
Nixeus
Nixeus NX-VUE24B Manual de usuario
Nixeus
Nixeus NX-VUE27 Manual de usuario
Nixeus
Nixeus NX-VUE27D Manual de usuario
Nixeus
Nixeus NX-VUE27D Manual de usuario
Nixeus
Nixeus FreeSync EDG 27 Manual de usuario
Nixeus
Nixeus NX-EDG274K Manual de usuario
Nixeus
Nixeus NX-EDG24S Manual de usuario
