Nixeus NX-EDG24S Manual de usuario
1
USER MANUAL
NX-EDG24
NX-EDG24S
2
Table of Contents
Important Information 3-4
Getting Started 5
Adjusting the Monitor Stand Adjustment 6 –7
Input and Connection Ports 8
To Enable AMD FreeSync Technology 9 - 10
Monitor Button Operations - Legends and Functions 11
Hot Key –Input 12
Button Functions and Features for On Screen Display (OSD) Main Menu 13
On Screen Display (OSD) PICTURE Sub-Menu 14
Brightness Adjustment 14
Contrast Adjustment 15
Sharpness Adjustment 16
Aspect Ratio 17
Ultra Vivid 18
Active Contrast (Dynamic Contrast Ratio) 19
On Screen Display (OSD) COLOR Sub-Menu 20
Color Temperature 20
Saturation 21
Gamma 22
Color Temperature (Preset Color Temperature Settings) 23
Color Temperature (User Define –Red, Green, Blue) 24-27
Advance (OSD) Sub-Menu 28
Volume 28
Mute 29
Over Drive 30
Low Blue Ray 31
On Screen Display (OSD) - OSD Settings Sub-Menu 32
Language 32
Menu Time 33
Horizontal and Vertical Adjustment 34 - 35
Transparency 36
Reset 37
Electronics Recycling and Proper Electronics Disposal 38 - 40
Nixeus Technology, Inc. - Contact Information 41
3
Important Information
Important Note:
Thank-you for your purchase! Please make sure your computer hardware and graphics card supports the Nixeus EDG 24"
Monitor. Some devices and connections may not be able to support the full 1920x1080 resolution at 144Hz refresh rates.
Avoid using 3rd party cable adapters/convertors to connect the NX-EDG24 to HDMI and DisplayPort output devices - we
cannot guarantee they will be compatible with the NX-EDG24. Only use cables that are direct connections and not
"convertors". If you are not sure, please contact your computer hardware’s manufacturer. Please read this manual before
using NX-EDG24 with your computer. It contains important information regarding the use and care of computer
monitors.
Safety and Maintenance:
1) Do not expose the monitor to direct sunlight. Keep the monitor away from a stove or any other heat source.
2) Remove or secure any objects that may fall into the monitor’s vents. Do not obstruct or block the cooling vents of the
monitor.
3) Don’t jam the vents on the enclosure.
4) When setting up the monitor for use, please ensure the power plug and socket are easy to insert and extract.
5) When disconnecting the power cord or DC power line for the monitor, please wait for 6 seconds before reconnecting
the power cord or DC power line wires for normal operation.
6) Please use only approved power line and power adapters provided by Nixeus. If any power connections are missing,
please contact Nixeus for a replacement. Using un-authorized power connectors may damage your monitor and void
your warranty.
7) During operation, please do not throw objects and take care to avoid collision with the monitor. Do not overclock or
modify the monitor’s decoder board. Please do not apply excessive force to the LCD panel or drop the monitor.
Warranty does not cover physical damages, over-clocking, and modifications to the monitor.
8) When monitor is not in use for a long period of time, please disconnect the power plug.
9) When using slightly wet cloth or LCD cleaners to clean the monitor, please disconnect the power adapter. Do not use
organic solvent, alcohol, house hold glass cleaners or ammonia liquid to clean the monitor - these may damage the
display panel.
10) Do not store or use monitor in hot, direct sunlight, or in a cold environment. To avoid electrical shock and to prevent
monitor damage; do not use the monitor in dusty, rain, wet, and humid conditions. If monitor gets wet, please wipe
clean with soft dry cloth as soon as possible. If foreign objects or liquids get into the monitor, please disconnect power
adapter immediately. For service please contact Nixeus Technical support for service and repair at
techsupport@nixeus.com
11) To ensure long life and best performance of the monitor, please use the monitor in these safe and optimum conditions:
Temperature = 0-40 degrees Celsius (32°-95° Fahrenheit), Humidity = 20-80% RH
4
Avoiding Image Persistence, Incidental Image or After Image:
1) When the monitor is on and unattended, please use a moving screen saver. If there is a static (nonmoving image) on the
screen, please refresh regularly or start an application to start using the screen.
2) Long time continuous display of static images may case a “brand” on the screen; this is also called “image persistence”
or “incidental image” or “after image.” “Brand,” “incidental image” or “after image” is a common phenomenon of LCD
Panel Technology. In most cases, after turning off the power supply for a certain amount of time the “brand,” “incidental
image” or “after image” will gradually disappear. Also by displaying a pure white image for the entire screen for the same
duration that you had the static image that caused the image persistence may remove the image persistence. Please contact
Nixeus if you need assistance in removing image persistence.
CAUTION: Serious “brand,” “incidental image” or “after image” will not disappear and cannot be repaired. This type of
damage is not covered by warranty. Please take good care of your monitor to prevent serious “brand,” “incidental image”
or “after image.”
Larger display panels may have some glow around the edges or corners. This is known as back light bleed and Glow - this
is normal due to the display LED technology that allows more light and higher brightness to produce more vibrant colors
and brighter pictures.
If your monitor needs replacement parts, warranty service, and repairs please do not attempt to do it yourself! Doing so
may void the warranty. Please contact techsuppor[email protected] for warranty support. For more information please visit
www.nixeus.com
5
Getting Started
Please note there are two versions:
NX-EDG24 includes a premium height adjustable stand
NX-EDG24S has a tilt only base stand
Box Contents:
Nixeus EDG 24” 1920x1080 FreeSync™ 144Hz Gaming Monitor (NX-EDG24)
Black DisplayPort to DisplayPort Cable x 1
Power Adapter & Power Cable x 1
NX-VUE24 Quick Start Guide
The included DisplayPort to DisplayPort cable is for connecting the NX-EDG24 for DisplayPort output devices/hardware.
NX-EDG24: Installing Base Stand: (Tools needed –Philips Screw Driver)
Please refer to quick guide for installations of Stand Base and Stand Shaft.
NX-EDG24S: Installing Base Stand:
Please refer to quick guide for installations of Stand Base.
For Audio/Sound: With a DisplayPort and HDMI connection, you can transmit audio from your computer to the
NXEDG24 monitor by adjusting your operating system's audio playback settings.
NOTE: Do not use cable/adapter converters to connect the NX-EDG24 to HDMI and DisplayPort output
hardware/devices. We cannot guarantee these adapters will work with the NX-EDG24. To enable AMD
FreeSync™ Technology - a direct DisplayPort only cable connection to your computer is required.
NX-EDG24 Power Cable and Power Supply Switch:
Only use the power cable included with the NX-EDG24. Using any other un-authorized power adapters may damage your
monitor and void your warranty. Connect the power cable to internal power supply on the back of the monitor.
6
Adjusting the Monitor Stand (NX-EDG24)
NX-EDG24 - Monitor Swivel Left/Right:
Make sure the NX-EDG24 is on a stable level surface. Holding the base shaft with your hand, carefully twist the monitor
shaft left or right to desired orientation.
NX-EDG24 - Monitor Tilting Forward/Back:
Use both hands, hold the top and bottom or right and left to tilt the monitor forward or backward by up to 15°.
7
NX-EDG24 - Monitor Tilting Height Adjustment:
Use both hands, press down the locking button, the slide the monitor up and down the stand shaft for your desired height
by up to 4 inches.
NX-EDG24 - Monitor Pivot to 90° Portrait Mode:
Using both hands, first raise the monitor to the highest point. Next pivot the monitor clock wise into portrait
mode.
NOTE: All Above Monitor and Stand Adjustments is for the NX-EDG24 model with a full feature premium
stand. The NX-EDG24S model only includes a base stand with tilt feature.
8
Input and Connection Ports
DC: Power Input
HDMI 2: HDMI 2.0 Input
HDMI 1: HDMI 2.0 Input
DisplayPort: DisplayPort 1.2 Input
NOTE:
All inputs support native resolutions of 1920 x 1080 and refresh rates up to 144Hz.
All inputs also support AMD Radeon FreeSync Premium Technology and Adaptive Sync Technology with compatible
AMD Radeon Graphics with AMD Radeon Graphics Drivers.
All HDMI inputs are compatible with Xbox gaming consoles at up to 120Hz.
NOTE: At this time Playstation 5 does not support this monitor for 120Hz and may perform at only 60Hz.
9
To enable AMD FreeSync™ Technology
1) First, you must have an AMD Radeon or AMD APU that is compatible with AMD FreeSync™ technology.
Below is a list of AMD hardware that is compatible with FreeSync™.
For an updated list of AMD hardware that is compatible with AMD FreeSync™ technology, please visit:
http://www.amd.com/en-us/innovations/software-technologies/technologies-gaming/freesync
2) Second, you must install or have already installed an AMD Radeon graphics drivers that have AMD
FreeSync™ technology (at minimum AMD Radeon 15.7 Graphics Driver). Always install the newest AMD Radeon
Drivers/ For updated FreeSync™ enabled AMD graphics drivers, please visit:
http://support.amd.com/en-us/download
3) Third, connect the NX-EDG24 monitor to your AMD FreeSync™ enabled hardware using the included
DisplayPort cable. Turn on your computer and power on the NX-EDG24 by pressing the [ ] POWER
ON/OFF button.
4) When your computer boots to the desktop, to enable FreeSync with your new NX-EDG24 FreeSync™ monitor you
must first access the AMD Radeon Software icon in the task bar mini menu on the bottom right of your desktop.
10
5) Next click on the gear icon on the top right corner:
6) In the AMD Radeon Software, click on the Display" tab then toggle the AMD FreeSync from OFF to ON.
NOTE: Once you enable FreeSync™ in the AMD Radeon Software you do not have to go through this process again
(unless you want to disable FreeSync™). If you disconnect the NX-EDG24 via DisplayPort cable from the computer, you
may have to go through this process again to enable FreeSync™. The Adaptive-Sync (FreeSync) range is 30Hz to 144Hz.
If you need additional assistance, please contact us toll free at 888-983-4128 or e-mail [email protected]om
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Monitor de Nixeus
Nixeus
Nixeus NX-VUE24B Manual de usuario
Nixeus
Nixeus Vue NX-VUE22 Manual de usuario
Nixeus
Nixeus NX-EDG274K Manual de usuario
Nixeus
Nixeus NX-VUE27D Manual de usuario
Nixeus
Nixeus FreeSync EDG 27 Manual de usuario
Nixeus
Nixeus NX-VUE27C Manual de usuario
Nixeus
Nixeus NX-VUE30 Manual de usuario
Nixeus
Nixeus NX-EDG34S Manual de usuario
Nixeus
Nixeus NX-VUE27D Manual de usuario
Nixeus
Nixeus NX-VUE 24A Manual de usuario
