Nivel System CL3D Manual de usuario

Cross laser 3D

CL3D

Thank you for purchasing Nivel System cross laser CL3D.For best use of purchased

instrument, please carefully read the manual and keep it in safe place,

to use this manual in the future.

Safety

WARNING: do not look straight into laser beam. Use laser according to the manual.

Construction

Cross laser housing is secured by rubber cover (protection against damage due to

breakdown or impact). In set as standard you can find CL3D cross laser batteries,

strap, casing and bracket (magnet wall shelf, geodetic tripod adapter)

Markings on panel

Modulation indicator (working with sensor)

Power indicator

Compensator blockade indicator

Modulation button

Laser display line button

Compensator blockade mode

Set the switch in the middle position to block the compensator (now you can work

with bent beam). In this case red diode will light up indicates the blockade of

compensator.

In case of low battery diode will start to blink slowly.

Using the laser

To turn on the laser set the switch in ON position.

The device will start to display the beam in horizontal.

If you want to work with laser sensor, laser must be switched into modulation mode

, diode near the icon will light up in green.

In CL1 using button you can turn on and off vertical and horizontal beam. Every

press of this button let you display vertical, horizontal or all beams at the same time.

Lase will level up by itself, in case of settin the laser out of levelling range the laser

beams won’t be displayed –you will hear the sound signal

Turning off the laser

To turn off the laser, set the switch in OFF position.

Magnetic bracket

Mount the laser to the bracket which can be used as a practical shelf. Using the

magnet you can place the shelf on metal element, adjusting laser beam for working

conditions.

FREE EXTENDED WARRANTY- 24 months

To use the free warranty extension to 24 months, the instrument must be registered

within three months from the date of purchase. Registration is done via a form on the

web: http://www.tpi.com.pl/rejestracja-gwarancji

Specification

Laser beam red

> 1mW (class II)

Accuracy ±2mm/10m

Beam display angle 360”

Display planes 3 (2 x vertical, 1 x horizontal)

Self levelling range ±3°

Working range: 15 m (indoor)

Working temperature range -10°C do＋45°C (CL1)

0°C do＋45°C (CL1G)

Power 4,5 V (3 batteries AA)

Resistance class IP44

Mount (screw) 1/4”, 5/8”

Dimensions 162 x 79 x 127 [mm]

Weight 1,3 kg

Nivel System –service, support

TPI Sp. z o.o., Bartycka 22, 00-760 Warsaw, Poland

+48 22 651 03 06, +48 22 651 03 09, [email protected]

www.nivelsystem.com

Otros manuales de Instrumento de medición de Nivel System

Nivel System

Nivel System CL3D Manual de usuario

Nivel System

Nivel System NL520 Manual de usuario

Nivel System

Nivel System NL600 Manual de usuario

Nivel System

Nivel System NL500 Manual de usuario

Nivel System

Nivel System CL1D Manual de usuario

Nivel System

Nivel System DM-120 Manual de usuario

Nivel System

Nivel System M100 DIGITAL Manual de usuario

Nivel System

Nivel System NL400 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario