Open Duration: This allows to set the relay switch time from 3-10 seconds.
Talk Duration: When the conversation time reaches this value, the door phone hand down the call, this
will help to avoid people forgetting to hand down the phone and keeping the line busy.
Remote
password:
Able to set up a 1-6 digits password, when the door phone call to other phones, people
can entry this password to open the door on the other phone.
Local password: 1-6 digits, Use this password to open the door on the door phone’s touch keypad.
Door Unlock
Indication: This Set different sound type when the local password entry is right.
Keypad Mode: Select to choose different mode: password only; Dial and password.
Enable/Disable
Access Table:
When switch to Disable, Calls from other phones to the door phone to open door, ( the
cards will still be usable)
Enable/Disable
Card reader:
When switch to Disable, The RFID card will stop working, not able to use ID card to open
door.
Access table:
Access table allows to add access authorization and manage them in one form, Phones in
this table will be able to call to the door phone and open the door.
Number: Telephone number
Access code: People should entry this code to open the door, when they use their
phones make the call to the door phone.
Name/Department
/Position: Please fill accordingly, or just leave blank
ID: RFID card number,NOT available on this model
Access
management: Select a Access number to modify or delete.
