Ninja Master Prep Manual de usuario

Master Prep®

QB900SL 30

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

For Household Use Only

WHEN USING ELECTRICAL

APPLIANCES, BASIC SAFETY

PRECAUTIONS SHOULD ALWAYS

BE FOLLOWED, INCLUDING THE

FOLLOWING:

READ ALL INSTRUCTIONS BEFORE

USING YOUR NINJA® MASTER

PREP®.

1. Close supervision is necessary when any

appliance is used by or near children.

2. To protect against electric shock, DO

NOT immerse cord, plug or any part of

the main unit in water or any other liquids.

3. DO NOT let cord hang over edge of table

or counter, or touch hot surfaces.

4. DO NOT operate appliance with damaged

cord or plug or after the appliance

malfunctions, or is dropped or has been

damaged in any manner. If the supply

cord is damaged, it must be replaced

by the manufacturer, its service agent

or similarly qualiﬁed persons in order to

avoid hazard.

5. Unplug appliance from outlet when not in

use and before cleaning.

6. DO NOT place on or near a hot gas or

electric burner.

7. The use of accessory attachments,

including canning jars not recommended

by the manufacturer may cause ﬁre,

electrical shock or risk of personal injury.

8. Extreme caution must be used when

moving an appliance containing hot food,

water or other liquids.

9. Use this appliance on a stable work

surface away from water.

10. DO NOT remove the motor head before

the chopping blades have stopped

turning.

11. CAUTION! Chopping blades are sharp,

handle with care. When handling the

chopping blades, always hold by the

plastic shaft. Always remove the blades

carefully from the containers before

emptying the containers and during

cleaning.

12. DO NOT attempt to sharpen blades.

IMPORTANT:

This appliance is not intended for use

by persons (including children) with

reduced physical, sensory or mental

capabilities, or lack of experience

and knowledge, unless they have

been given supervision or instruction

concerning the use of the appliance

by a person responsible for their

safety.

13. DO NOT expose jars to extreme

temperature changes.

14. DO NOT use jars if they are cracked or

chipped.

15. DO NOT use the appliance if chopping

blades are bent or damaged.

16. Avoid contact with moving parts at all

times. Keep hands, hair, clothing as well

as spatulas and other utensils away from

pitcher or chopping container during

operation to prevent risk of personal

injury and/or damage to the appliance.

17. Exercise extreme caution when blending

hot liquids.

18. Immediately release the On/Off pulse

button on the motor head in the event

that the appliance malfunctions during

use.

19. To reduce the risk of injury, NEVER

operate the appliance without the splash

guard in place; DO NOT try to defeat the

interlock mechanism; make sure that the

cutting blades are properly assembled

before operating the appliance.

20. DO NOT use outdoors.

21. DO NOT use appliance for other than

intended use.

22. DO NOT operate the appliance for more

than 15 seconds.

23. DO NOT operate the appliance empty.

24. If the appliance overheats, a thermal

switch will become activated and shut off

the motor. To reset, unplug the appliance

and let it cool down for approximately 10

minutes before using again.

NOTE: This unit has a short power supply

cord to reduce the risk resulting from

becoming entangled in or tripping over a

long cord. An extension cord may be used

if you are careful in its use:

1. The electrical rating of the extension

cord should be at least as great as the

electrical rating of the appliance.

2. An extension cord with the power cord

must be arranged so that it will not drape

over the countertop or tabletop where

they can be pulled on by children or

tripped over accidentally.

TECHNICAL SPECIFICATIONS

Voltage: 220-240V, 50Hz

Power: 400 Watts

Pitcher Capacity: 48 oz / 1.5 Litres

Bowl Capacity: 16 oz / 0.5 Litres

This applaince complies with the WEEE-Directive 2002/96/EC on the disposal of

electrical and electronic equipment (WEEE).

This appliance complies with the European directives for electromagnetic

compatibility (EMC) 2004/108/EC and its revisions, as well as Low Voltage Directive

(LVD) 2006/95/EC and its revisions.

This marking indicates that this product should not be disposed with other

household wastes throughout the EU. To prevent possible harm to the

environment or human health fom uncontrolled waste disposal, recycle it

responsibly to promote the sustainable reuse of material sources. To return

your used device, please use the return and collection systems or contact

the retailer where this product was purchased. They can take this product

for environmental safe recycling.

Technical details

Model number QB900SL 30

Input 220-240V, 50 Hz

Output 400 Watts

Main unit voltage 220-240V, 50Hz

Not to be d ispose d

of with o ther

household waste.

Contents

Getting Started ......................................................................6

Using the Master Prep® Pitcher .......................................8

Using the Master Prep® Bowl ...........................................10

Cleaning and Maintenance ................................................12

Troubleshooting Guide .......................................................12

Thank you for

purchasing

the Ninja®

Master Prep®.

Getting Started

i Pitcher Storage Lid

j Bowl Splash Guard

k Upper Blade (bowl)

l Lower Blade (bowl)

m Master Prep® Bowl with Non-Slip Base

n Bowl Storage Lid

o Power Cord (not shown)

a On/Off Pulse Button

b Power Head

c Pouring Spout

d Pitcher Splash Guard

e Upper Blade (pitcher)

f Lower Blade (pitcher)

g Master Prep® Pitcher with Non-Slip Base

h Spindle Pin

400 Watt Power Head

The 400 watt power head operates on 220-240V, 50Hz electrical power. NEVER

allow the power head to become wet when plugged into an electrical outlet.

WARNING: The power head should never be immersed in water or any other liquid.

CAUTION: Make sure that the power head is unplugged from the electrical outlet and

that the blades have stopped turning before attaching or removing any accessory.

CAUTION: Blades are sharp! Use extreme caution when handling the blades.

Always hold them by the shaft. Do not attempt to sharpen blades.

IMPORTANT: Never run the appliance empty.

The Ninja® Master Prep® is an indispensable kitchen tool that is perfect for blending,

chopping, mixing or pureeing when preparing your favorite recipes. For best results,

be sure to carefully read all the instructions contained in the manual before using this

appliance.

Using the Master Prep® Pitcher

WARNING: DO NOT try to place the

blades onto the power head and then

into the Master Prep™ pitcher.

CAUTION: Blades are sharp! Use

extreme caution when handling the

blades. Always hold them by the shaft.

IMPORTANT: Never run the appliance

empty.

1 Place the Master Prep® pitcher on a

clean, dry, level surface.

2 Holding the lower blade by the shaft,

place it onto the spindle pin inside the

Master Prep® pitcher. (Fig. 1)

3 Carefully insert the upper blade over

the lower blade rotating it until it locks

onto the lower blade. (Fig. 2)

IMPORTANT: Always assemble the

blades inside the container.

Shaft

4 Add the ingredients to be processed

into the Master Prep® pitcher.

IMPORTANT: The blade assembly for

the Master Prep® pitcher must always

be in place before ingredients are

added.

5 Place the pitcher splash guard onto the

top of the Master Prep® pitcher. (Fig. 3)

6 Place the power head on top of the

pitcher splash guard making sure that

it is securely in place. (Fig. 4) DO

NOT attempt to operate the appliance

without the safety splash guard in

place.

7 To start the appliance, plug the power

cord into the electrical outlet, securely

hold power head while operating

and press on the on/off pulse button

located on the top of the power head.

(Fig. 5)

8 Hold the Master Prep® pitcher ﬁrmly

while depressing the on/off pulse

button to ensure the unit stays in place.

NOTE: DO NOT operate the appliance

continuously for more than 15 seconds

at a time.

9 To stop the appliance, remove your

ﬁngers from the on/off pulse button.

10 In order to obtain a better quality of

chopping, operate the appliance by

using the “Pulse” method.

11 Make sure that the blades have

stopped completely before removing

the power head.

12 If the ingredients stick to the side of

the Master Prep® pitcher, stop the

appliance, remove the power head

and the splash guard. Use a spatula to

dislodge the pieces and then replace

the splash guard and the power head.

Continue processing.

13 Depending on the consistency of the

contents, use the pouring spout to

empty liquid contents.

14 For thicker consistencies, ﬁrst remove

splash guard and blade assembly (by

its shaft), then empty contents of the

Master Prep® pitcher.

Pouring Spout

Using the Master Prep® Bowl

CAUTION: Blades are sharp! Use

extreme caution when handling the

blades. Always hold them by the shaft.

IMPORTANT: Never run the appliance

empty.

1 Place the Master Prep® bowl on a clean,

dry, level surface.

2 Holding the lower blade by the shaft,

place it over the spindle pin inside the

Master Prep® bowl. (Fig. 1)

3 Carefully insert the upper blade over

the lower blade rotating it until it locks

onto the lower blade. (Fig. 2)

IMPORTANT: Always assemble the

blades inside the container.

WARNING: DO NOT try to place the

blades onto the power head and then

into the Master Prep® bowl.

4 Place the food that you want to process

into the Master Prep® bowl.

IMPORTANT: The blade assembly for

the Master Prep® bowl must always be

in place before ingredients are added.

NOTE: DO NOT add more than 2 cups

dry or 1 cup liquid ingredients as this

will strain the motor and may cause

overﬂow.

Shaft

Otros manuales para Master Prep

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Licuadora de Ninja

Ninja

Ninja BL492 series Manual de usuario

Ninja

Ninja Master Prep QB750 Series Manual de usuario

Ninja

Ninja BL640 Manual de usuario

Ninja

Ninja MEGA KITCHEN SYSTEM BL770 Series Manual de usuario

Ninja

Ninja BL300 Manual de usuario

Ninja

Ninja FOODI CB402ANZ Manual de usuario

Ninja

Ninja Nutri Ninja Pro Complete Manual de usuario

Ninja

Ninja STORM QB750Q Series Manual de usuario

Ninja

Ninja Nutri BL480UK Manual de usuario

Ninja

Ninja BL770 series Manual de usuario

Ninja

Ninja BN495EU Manual de usuario

Ninja

Ninja Foody POWER NUTRI CB350UK Series Manual de usuario

Ninja

Ninja NF700 Series Manual de usuario

Ninja

Ninja BL682UKCO Manual de usuario

Ninja

Ninja TB300 Series Manual de usuario

Ninja

Ninja Ninja Warrior NJ200 Manual de usuario

Ninja

Ninja BL490UK2 Manual de usuario

Ninja

Ninja BL481 Manual de usuario

Ninja

Ninja CREAMI Manual de usuario

Ninja

Ninja Ninja Chef High-Speed Series Manual de usuario

Ninja

Ninja BL770REF Manual de usuario

Ninja

Ninja BL641C Manual de usuario

Ninja

Ninja BL450NZ Manual de usuario

Ninja

Ninja BL492UK Manual de usuario

Manuales populares de Licuadora de otras marcas

ROTOR

ROTOR 1125.201 Manual de usuario

Braun

Braun Multiquick 5 Vario series Manual de usuario

ARENDO

ARENDO MIRA 305424 Manual de usuario

CHEF-BUILT

CHEF-BUILT CCB-3500 Manual de usuario

Viconte

Viconte VC-4406 Manual de usuario

Oster

Oster BLSTAB-CB0 Manual de usuario

HOFFEN

HOFFEN MC-3005 Manual de usuario

Black & Decker

Black & Decker BLC18750DM Manual de usuario

Sunbeam

Sunbeam 4182 Manual de usuario

Bialetti

Bialetti FMX35 Manual de usuario

Black & Decker

Black & Decker BL8000 Manual de usuario

Duronic

Duronic BL530 Manual de usuario

Exquisit

Exquisit MS 3002 wes Manual de usuario

Lumme

Lumme LU-KP1891A Manual de usuario

Binatone

Binatone HB-735 Manual de usuario

Moulinex

Moulinex LM936E10 Manual de usuario

Oster

Oster VERSA Manual de instalación y operación

Vigan Mammoth

Vigan Mammoth TM4V1 Manual de usuario