4. Connecting the WiFi via WPS function is also
available, please press the WPS button for more
than 3 seconds to enable it.
Note: How to change the SSID &
Password
1. Log in to http://192.168.0.1 (refer to the device
label) and enter the management page.
2. Select Device Settings > Wi-Fi Settings > SSID
Settings, then you will see “Network Name (SSID)”
and “Pass Phrase”, Make sure you delete the old
name and password and enter the new name and
password as you require.
3. Select “Apply” button, then log out.
4.
Wait for the computer or laptop screen to
display the Wi-Fi icon. This means the wireless
network connection has been successful.
III.Connecting to the Internet
If the Wi-Fi function is turned on, your device
should connect to the internet automatically.
IV.Logging into the Device
Management website
1. Make sure the end-user device is connected
to the MiFi.
2. Open the browser, enter http://192.168.0.1
(refer to the device label) in the address box.
3. Enter username and the password, and
click “login”. The administrator has the right to
check and modify configuration permission.
Note: The default password is admin.
Charging your MiFi
1st method:
Charging by power adapter
1. Use compatible power adapter (5V,
1000mA).
2. Power adapter is a selective accessory.
2nd method:
Charging by connecting to
computer or laptop. Please use the proper cable
to connect the MiFi to the computer or laptop.
Note:
If the MiFi hasn’t been used for a long
time, please charge the battery before using.
USB Storage
Connect the MiFi to the computer using a data
cable. Once the computer reads the inserted SD
card of the MiFi, it will start to function as USB
storage.
Restore Factory Settings
If you are uncertain of which Wi-Fi settings you
have configured or changed, you can restore the
factory defaults that come with the MiFi to
reconfigure the device Wi-Fi setting.
Log into Device Management Website to
restore to factory default settings.
Press and hold “Reset” button for 5 seconds,
and the MiFi will be activated again and
restored to factory settings.
Note:
Reset button will delete all the device’s
user-defined Wi-Fi settings and restore Admin
setting and Wi-Fi Setting to factory defaults.
Trouble Shooting:
If you are having trouble with the MiFi, here are a
few things you can do to get it to function
properly:
1. If the MiFi is not responsive, reboot it by
pressing the ‘Reset’ button for about 5 seconds.
2. Restore factory settings
Note: All figures above are for reference
only.
Note!
1. Caution: Risk of explosion if battery is
replaced with an incorrect or unapproved type.
Used batteries must be disposed according to
the manufacturer's instructions.
2.
The MiFi product shall only be connected using
a USB interface of version USB2.0.
3.
User’s adapter shall be installed near the
equipment and shall be easily accessible.
4.
The maximum operating temperature of
the MiFi is 40
℃
.
5.
This equipment is in compliance with
the essential requirements and other relevant
provisions of directive 1999/5/EC.
