Nilfisk-Advance MC 6P Manual de usuario

MC 6P

SERVICE MANUAL

SM_MC_6P Ver.2.0_2021

Preface

This service manual contains detailed description of the main repair work on the cold HPW

MC 6P.

Repair work requires a suitable testing workplace with the necessary water and power supply.

If operating errors are evident, refer the customer to the operating instructions.

A fault in the cleaner can have several causes as described in the section on troubleshooting.

Refer to the illustrated spare parts lists during repairs. They show the assembly position and the

sequence in which the individual components should be assembled.

See ”Technical Service Bulletin (TSB) sheets. They include information on technical

modifications that have been made after this repair manual was printed.

”Technical Service Bulletin” sheets are also valid as a supplement to the spare parts list until

publication of a new edition.

Repair manuals and ” Technical Service Bulletin” sheets should be available at the site

where repairs are carried out.

It is not permitted to give them to third parties.

Use original Nilfisk spare parts only.

I. Special tools /Spare parts

Wiring diagrams

Adjustment / Test

Service / Repair

Troubleshooting

Function

Construction

Technical data

Safety instructions

48-54

45-47

38-44

35-37

26 -34

19 -25

5-18

SM_MC_6P Ver.2.0_2021

Safety instructions

For your own safety

ESD measures

(electrostatic discharge)

Observe valid safety regulations

for electrical equipment. In

particular, observe the following

regulations:

IEC 60335-2-79

EN 60335-2-79

Additionally:

Also see national regulations

Before using the cleaner, always

read the operating instructions

and keep them readily available.

Only allow the high pressure

Repair work should be carried

out by persons instructed in

electrical installations or by

trained electricians only.

Take the following ESD precautions before carrying out any

repairs to the electronics:

• Touch the earth conductor before repairing the cleaner

( to discharge electrostatic charge from your body ).

• Wear wrist band if necassary.

• Use a conductive floor covering or a conductive table cover.

• Never touch the printed circuit board or electronic components

( always hold on to plastic ).

• Transport electronic components in conductive packaging

( e.g. ESD bag ).

Technical data

SM_MC_6P Ver.2.0_2021 5

Item number: 107146750 MC 6P-2300/5.0 FA 230/1/60 US

Service manual data

PUMP:

Pressure ppump @ Qnom bar 155

Pressure pgun @ Qnom bar 130

Retaining/opening pressure bar

Flow Qnom l/min (gpm) 16,8 (4,4)

Suction height dry m (ft.) 1 (3)

Suction height primed m (ft.) 2,5 (8)

Pump type - NA6

Number of pistons - 4

Pump piston type - Full Ceramic

Cylinder stroke mm 6,02

Pump oil type - Castrol Alphasyn T 150

Pump oil amount per pump l0,73

ELECTRIC:

Electrical data V/ph/Hz 230V/1ph/60Hz

Current @ V1A28

Current limiter A-

High voltage test voltage V1500

HV insulation resistance min. MΩ1

Earth circuit resistance max. Ω0,2

Speed rpm 1740

Electric diagram item number - 106420563

UNIT DATA:

Nozzle Size - NT 0680

Max. inlet temperature (suction) °C (°F) 50 (122)

Max. inlet temperature (primed) °C (°F) 70 (158)

Max. inlet temperature (pressure fed) °C (°F) 80 (176)

Max. water inlet pressure bar 10

Min. water inlet pressure bar 1

Max. ambient temperature °C (°F) 40 (104)

Gun Type - ERGO 2000 STD INCL. SWIVEL NILFISK

Lance primary/secondary - 101406108/None

High pressure hose - DN10 x 15m - Black

Sound power typeplate dBA 88

Vibration ISO 5349 Lance 1 m/s2<1,5; +/-1

Cleaning Impact kg-force

Fuse size AC 30

Protection Class - IPX5

Weight - Machine incl. standard acc. kg (lb) 90 (198)

Size - Machine alone LxWxH (mm) 775x570x1020

Detergent suction % (+/-)6

Technical data

SM_MC_6P Ver.2.0_2021 6

Service manual data

PUMP:

Pressure ppump @ Qnom bar 239

Pressure pgun @ Qnom bar 219

Retaining/opening pressure bar

Flow Qnom l/min 15,65

Suction height dry m1

Suction height primed m2,5

Pump type - NA6

Number of pistons - 4

Pump piston type - Full Ceramic

Cylinder stroke mm 0

Pump oil type - Castrol Alphasyn T 150

Pump oil amount per pump l0,95

ELECTRIC:

Electrical data V/ph/Hz 400V/3ph/50Hz

Current @ V1A15,5

Current limiter A-

High voltage test voltage V1500

HV insulation resistance min. MΩ1

Earth circuit resistance max. Ω0,2

Speed rpm 1450

Electric diagram item number - 106420552

UNIT DATA:

Nozzle Size - NT 0475

Max. inlet temperature (suction) °C 50

Max. inlet temperature (primed) °C 70

Max. inlet temperature (pressure fed) °C 80

Max. water inlet pressure bar 10

Min. water inlet pressure bar 1

Max. ambient temperature °C 40

Gun Type - ERGO 2000 STD INCL. SWIVEL NILFISK

Lance primary/secondary - 101406108/None

High pressure hose - DN10 x 10m - Black

Sound power typeplate dBA 93

Vibration ISO 5349 Lance 1 m/s2<1,5; +/-1

Cleaning Impact kg-force

Fuse size AC 16

Protection Class - IPX5

Weight - Machine incl. standard acc. kg 89

Size - Machine alone LxWxH (mm) 775x570x1020

Detergent suction % (+/-)6

Item number: 107146751 MC 6P-250/1100 FA 400/3/50 EU

Technical data

SM_MC_6P Ver.2.0_2021 7

Item number: 107146752 MC 6P-180/1300 FA 400/3/50 EU

Service manual data

PUMP:

Pressure ppump @ Qnom bar 168

Pressure pgun @ Qnom bar 140

Retaining/opening pressure bar

Flow Qnom l/min 18,7

Suction height dry m1

Suction height primed m2,5

Pump type - NA6

Number of pistons - 4

Pump piston type - Full Ceramic

Cylinder stroke mm 0

Pump oil type - Castrol Alphasyn T 150

Pump oil amount per pump l0,95

ELECTRIC:

Electrical data V/ph/Hz 400V/3ph/50Hz

Current @ V1A13,3

Current limiter A-

High voltage test voltage V1500

HV insulation resistance min. MΩ1

Earth circuit resistance max. Ω0,2

Speed rpm 1450

Electric diagram item number - 106420552

UNIT DATA:

Nozzle Size - NT 0700

Max. inlet temperature (suction) °C 50

Max. inlet temperature (primed) °C 70

Max. inlet temperature (pressure fed) °C 80

Max. water inlet pressure bar 10

Min. water inlet pressure bar 1

Max. ambient temperature °C 40

Gun Type - ERGO 2000 STD INCL. SWIVEL NILFISK

Lance primary/secondary - 101406108/None

High pressure hose - DN10 x 10m - Black

Sound power typeplate dBA 90

Vibration ISO 5349 Lance 1 m/s2<1,5; +/-1

Cleaning Impact kg-force

Fuse size AC 16

Protection Class - IPX5

Weight - Machine incl. standard acc. kg 86

Size - Machine alone LxWxH (mm) 775x570x1020

Detergent suction % (+/-)6

Technical data

SM_MC_6P Ver.2.0_2021 8

Item number: 107146754 MC 6P-180/1300 FA 220-440/3/60 EXPT

Service manual data

PUMP:

Pressure ppump @ Qnom bar 172

Pressure pgun @ Qnom bar 144

Retaining/opening pressure bar

Flow Qnom l/min 18,8

Suction height dry m1

Suction height primed m2,5

Pump type - NA6

Number of pistons - 4

Pump piston type - Full Ceramic

Cylinder stroke mm 0

Pump oil type - Castrol Alphasyn T 150

Pump oil amount per pump l0,95

ELECTRIC:

Electrical data V/ph/Hz 220V/3ph/60Hz

Current @ V1A24,7

Current limiter A-

High voltage test voltage V1500

HV insulation resistance min. MΩ1

Earth circuit resistance max. Ω0,2

Speed rpm 1740

Electric diagram item number - 106420556

UNIT DATA:

Nozzle Size - NT 0700

Max. inlet temperature (suction) °C 50

Max. inlet temperature (primed) °C 70

Max. inlet temperature (pressure fed) °C 80

Max. water inlet pressure bar 10

Min. water inlet pressure bar 1

Max. ambient temperature °C 40

Gun Type - ERGO 2000 STD INCL. SWIVEL NILFISK

Lance primary/secondary - 101406108/None

High pressure hose - DN10 x 10m - Black

Sound power typeplate dBA 90

Vibration ISO 5349 Lance 1 m/s2<1,5; +/-1

Cleaning Impact kg-force

Fuse size AC 30

Protection Class - IPX5

Weight - Machine incl. standard acc. kg 87

Size - Machine alone LxWxH (mm) 775x570x1020

Detergent suction % (+/-)6

Technical data

SM_MC_6P Ver.2.0_2021 9

Item number: 107146755 MC 6P-170/1600 FA 400/3/50 EU

Service manual data

PUMP:

Pressure ppump @ Qnom bar 162

Pressure pgun @ Qnom bar 120

Retaining/opening pressure bar

Flow Qnom l/min 23,5

Suction height dry m1

Suction height primed m2,5

Pump type - NA6

Number of pistons - 4

Pump piston type - Full Ceramic

Cylinder stroke mm 0

Pump oil type - Castrol Alphasyn T 150

Pump oil amount per pump l0,95

ELECTRIC:

Electrical data V/ph/Hz 400V/3ph/50Hz

Current @ V1A15

Current limiter A-

High voltage test voltage V1500

HV insulation resistance min. MΩ1

Earth circuit resistance max. Ω0,2

Speed rpm 1450

Electric diagram item number - 106420552

UNIT DATA:

Nozzle Size - NT 0950

Max. inlet temperature (suction) °C 50

Max. inlet temperature (primed) °C 70

Max. inlet temperature (pressure fed) °C 80

Max. water inlet pressure bar 10

Min. water inlet pressure bar 1

Max. ambient temperature °C 40

Gun Type - ERGO 2000 STD INCL. SWIVEL NILFISK

Lance primary/secondary - 101406108/None

High pressure hose - DN10 x 10m - Black

Sound power typeplate dBA 90

Vibration ISO 5349 Lance 1 m/s2<1,5; +/-1

Cleaning Impact kg-force

Fuse size AC 16

Protection Class - IPX5

Weight - Machine incl. standard acc. kg 89

Size - Machine alone LxWxH (mm) 775x570x1020

Detergent suction % (+/-)5

Technical data

SM_MC_6P Ver.2.0_2021 10

Item number: 107146758 MC 6P-250/1100 FAXT 400/3/50 EU

Service manual data

PUMP:

Pressure ppump @ Qnom bar 240

Pressure pgun @ Qnom bar 210

Retaining/opening pressure bar

Flow Qnom l/min 15,3

Suction height dry m1

Suction height primed m2,5

Pump type - NA6

Number of pistons - 4

Pump piston type - Full Ceramic

Cylinder stroke mm 0

Pump oil type - Castrol Alphasyn T 150

Pump oil amount per pump l0,95

ELECTRIC:

Electrical data V/ph/Hz 400V/3ph/50Hz

Current @ V1A15,3

Current limiter A-

High voltage test voltage V1500

HV insulation resistance min. MΩ1

Earth circuit resistance max. Ω0,2

Speed rpm 1450

Electric diagram item number - 106420552

UNIT DATA:

Nozzle Size - NT 0475

Max. inlet temperature (suction) °C 50

Max. inlet temperature (primed) °C 70

Max. inlet temperature (pressure fed) °C 80

Max. water inlet pressure bar 10

Min. water inlet pressure bar 1

Max. ambient temperature °C 40

Gun Type - ERGO 2000 STD INCL. SWIVEL NILFISK

Lance primary/secondary - 101406108/101406119

High pressure hose - DN10 x 15m - Black

Sound power typeplate dBA 93

Vibration ISO 5349 Lance 1 m/s2<1,5; +/-1

Cleaning Impact kg-force

Fuse size AC 16

Protection Class - IPX5

Weight - Machine incl. standard acc. kg 96

Size - Machine alone LxWxH (mm) 930x570x1020

Detergent suction % (+/-)6

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hidrolavadora de Nilfisk-Advance

Nilfisk-Advance

Nilfisk-Advance C 120.2 Manual de usuario

Nilfisk-Advance

Nilfisk-Advance Gerni 2302A Manual de usuario

Nilfisk-Advance

Nilfisk-Advance E130.3 X-TRA Instrucciones de funcionamiento

Nilfisk-Advance

Nilfisk-Advance E 140.2 Manual de usuario

Nilfisk-Advance

Nilfisk-Advance SC UNO Series Manual de usuario

Nilfisk-Advance

Nilfisk-Advance MH 3M Manual de usuario

Nilfisk-Advance

Nilfisk-Advance MH 1C Manual de usuario

Nilfisk-Advance

Nilfisk-Advance MC 5M Manual de usuario

Nilfisk-Advance

Nilfisk-Advance C 100.7 Instrucciones de funcionamiento

Nilfisk-Advance

Nilfisk-Advance MC 5M Manual de usuario

Nilfisk-Advance

Nilfisk-Advance 2300A Manual de usuario

Nilfisk-Advance

Nilfisk-Advance C 100.7 Manual de usuario

Nilfisk-Advance

Nilfisk-Advance Nilfisk C 120.5 X-TRA Instrucciones de funcionamiento

Nilfisk-Advance

Nilfisk-Advance SelectSpray 1500E 56011781 Manual de usuario

Nilfisk-Advance

Nilfisk-Advance E130.3 X-TRA Manual de usuario

Nilfisk-Advance

Nilfisk-Advance MH 5M Manual de usuario

Nilfisk-Advance

Nilfisk-Advance MH 5M E Manual de usuario

Nilfisk-Advance

Nilfisk-Advance SC UNO 4M 140/620 PS Manual de usuario

Nilfisk-Advance

Nilfisk-Advance C 125.4 Manual de usuario

Nilfisk-Advance

Nilfisk-Advance SH SOLAR G Manual de usuario

Nilfisk-Advance

Nilfisk-Advance C 120.3 Manual de usuario

Nilfisk-Advance

Nilfisk-Advance C 125.4 Instrucciones de funcionamiento

Nilfisk-Advance

Nilfisk-Advance P 150.2 X-TRA Manual de usuario

Nilfisk-Advance

Nilfisk-Advance SelectSpray 1250E Manual de usuario

Manuales populares de Hidrolavadora de otras marcas

Shark

Shark RG-232637 Manual de usuario

Shakti Technology

Shakti Technology S3 Manual de usuario

Kärcher

Kärcher K 4 Pure Manual de usuario

Porter-Cable

Porter-Cable D25806-025-2 Manual de usuario

REM POWER

REM POWER HDEm 662 Manual de usuario

Landa

Landa HS-3000 Manual de usuario

Craftsman

Craftsman 580.752270 Manual de usuario

HIKOKI

HIKOKI AW 100 Manual de usuario

Delco

Delco DC 1302 Manual de usuario

Kärcher

Kärcher K 3 Full Control Manual de usuario

BIEMMEDUE

BIEMMEDUE 120/10 - 170/13 Manual de usuario

ARKSEN

ARKSEN 014-HG-14141-HR Manual de usuario

Black & Decker

Black & Decker PW1700SPX Manual de usuario

Kärcher

Kärcher 595 - SPARE Guía

Kranzle

Kranzle B 10 200 Manual de usuario

Stihl

Stihl RE 90 Manual de usuario

Husky

Husky HU80911 Manual de usuario

PowR-Quip

PowR-Quip PQ-2600 Manual de usuario