Nikon COOLPIX AW100 Manual de usuario

DIGITAL CAMERA

COOLPI/_ 100

Reference Manual

Basic shooting operations can be performed. In addition, the options of shooting

menu can be adjusted according to the shooting conditions and the kind of

images you want to capture.

Display the shooting screen -) I_1 (shooting mode) button -_ I_1

• The focus area for autofocus differs depending on

the setting of AF area mode that can be selected in

the I_1 tab after pressing the MENUbutton.

• When AF area mode is setto Face priority (default

setting), tile camera focuses as follows:

Tile camera detects and focuses on faces (see "Using

Face Detection" (_65) for more information).

If no faces are detected, tile camera automatically selects one or more of the

nine focus areas containing tile subject closest to tile camera. When tile

subject is in focus, tile focus area (active focus area) lights in green (maximum

of nine areas).

Changing I_1 (Auto) Mode Settings

• See "Features That (tan Be Set Using tile Multi Selector" (_53) for more

information on flash mode (_54), self-timer (_56), macro mode (_57), and

exposure compensation (_58).

• See the shooting menu below for more information on functions that can be

set using the MI_NUbutton.

Options Available in the Shooting Menu (1_1 (Auto) Mode)

In I_1(auto) mode, tile following option settings carl be

changed.

I_I (Auto) Mode

.........Option u_0 Descr_pt_o_ "_...................... _

White balance

Continuous

ISO sensitivity

AF area mode

Autofocusmode

Adjust colors in the image closer to the colors as they appear

to the eye. Although Auto (default setting) can be used

under most types of lighting, you can apply the white

balance setting suited to the sky conditions or light source to

achieve better results if default setting results are

unsatisfactory.

When the white balance setting is other than Auto or

Flash, set the flash mode ([_)54) to (_ (off).

Select the mode used for taking a series of pictures from

Single, Continuous H, Continuous L,BSS (_43) and

Multi-shot 16 The default setting isSingle (i.e., only one

picture is captured at a time).

When set to Continuous H, up to three pictures are shot at

a rate of about 7.1 frames per second while the shutter-

release button is pressed all the way (when image mode is

set to _ 4608x3456).

Higher ISO sensitivity allows you to take pictures of darker

subjects. Additionally, even with subjects of similar

brightness, pictures can be taken with faster shutter speeds,

and blurring caused by camera shake and subject

movement can be reduced. When set to Auto (default

setting), the camera sets the ISQ sensitivity automatically.

If ISOsensitivity has increased automatically when Auto is

selected, _ ([_)28) is displayed on the shooting screen.

Allow you to determine how the camera selects the focus

area for autofocus to Face priority (default setting), Auto,

Manual, Center or Subject tracking mode.

Single AF (default setting) to adjust the focus only when the

shutter-release button is pressed halfway or Full-time AF to

adjust the focus even when the shutter-release button is not

>ressed halfway can be selected. You may hear the sound of

the camera focusing.

_34

_36

_37

_38

_41

[] Features That Cannot Be Used Simultaneously

These features may not be used in combination with certain features (_63)

Pressthe multi selector • (_), _ (_k_)),• (_), or i_ (l_) while shooting to operate

the following functions.

Flashmode (_54)= x°o--ecom,eo.,,o°

Macro mode ([_57)

Available Functions

Available functions differ according to the shooting mode as follows.

•See "Default Settings" (_59) for more information on the default settings in

each shooting mode.

Function Easy aut o [

mode i

Flashmode

(_54)

Self-timer ([_56)

Macro mode

(_57)

Exposure

compensation

(_58)

Special Smart

effects portrait a (Auto)

The setting varies with scene mode or special effects. See "Default Settings" ([_59) for

more information.

Features That Can Be Set Using the Multi Selector

Flash Modes (Using the Flash)

You can set a flash mode that suits the shooting conditions.

1 Press • (_ flash mode) on the multi selector,

2Press the multi selector to select the desired

mode and press the _) button.

•See "Available Flash Modes" ([_)55) for more

information.

•If the _) button is not pressed within a few seconds,

the selection will be canceled.

• When _AIITO(auto) is applied, _ is only displayed for

afew seconds, regardless of Photo info settings

(_94).

3Frame the subject and take a picture.

•The flash lamp indicates the status of the flash when

you press the shutter-release button halfway.

- On: The flash will fire when you press the shutter-

release button all the way.

- Blinking: The flash is charging. The camera cannot

take pictures.

Off: The flash will not fire when a picture is taken.

• If the battery is low, the monitor will be turned off

while the flash ischarging.

[] Effective Range of the Flash

The flash has a range of about 0.3 to 3.5 m (1 ft to 11 ft) for wide angle position, and about

0.5 to 2.2 m (1 ft 8 in, to 7 ft 2 in,) for telephoto zoom position (when ISO sensitivity is set to Auto),

Features That Can Be Set Using the Multi Selector

Available Flash Modes

_@[]TOAuto

The flash fires automatically when lighting is dim.

_@ Auto with red-eye reduction

Suitable for portraits. Reduces red-eye effect caused by flash in portraits.

@ Off

The flash does not fire.

Using a tripod is recommended to stabilize the camera when shooting in dark

surroundings.

Fill flash

The flash fires when a picture is taken, regardless of how bright the subject is. Use to

"fill-in" (illuminate) shadows and backlit subjects.

slowSync

Auto flash mode is combined with a slow shutter speed.

Suitable for portraits of human subjects shot at night or under dim light. Flash

illuminates main subject; slow shutter speeds are used to capture background. o

[] Flash Mode Setting

• The setting varies with shooting mode. See "Available Functions" (_53) and "Default Settings"

(_59) for more information.

• This feature cannot be used in combination with certain features. See "Features That Cannot Be

Used Simultaneously" (_63).

• The changed flash mode setting applied in I_1 (auto) mode is saved in the camera's memory even

after the camera is turned off,

[] Auto with Red-eye Reduction

This camera uses advanced red eye reduction ("in (amera Red Eye Fix").

Pre flashes are fired repeatedly at low intensity before the main flash, reducing the red eye effect.

If the camera detects "red eye" when a picture is taken, Nikon's own in Camera Red Eye Fix processes

the image before it is recorded.

Note the following when taking pictures:

• Because pre flashes are fired, there is a slight lag between when the shutter release button is

pressed and when the picture is shot.

• The time required to save the picture increases slightly.

• Advanced red eye reduction may not produce the desired results in some situations.

• in extremely rare instances, areas not subject to red eye may be affected by advanced red eye

reduction processing. In these cases, choose another flash mode and try again. 55

Features That Can Be Set Using the Multi Selector

Using the Self-timer

The self-timer is suitable for taking group pictures and reducing the vibration when

the shutter-release button is pressed.

When using the self-timer, use of a tripod is recommended. %t Vibration

reduction in the setup menu (_94) to Off when using a tripod to stabilize the

came[a.

1 Press _ (__) self-timer) on the multi selector.

2Press the multi selector A or V to select 10s _I

or 2s and press the _ button. @_ I

•lOs (ten seconds): suitable for group pictures. I

• 2s (two seconds): suitable for preventing camera I

shake.

• When the shooting mode is set to Pet portrait in

scene mode, I_i (pet portrait auto release) isdisplayed

(_46).The self-timer lOs and 2s are not available.

• The mode selected for the self-timer is displayed.

• If the _) button is not pressed within a few seconds, the selection will be canceled.

3Frame the subject and press the shutter-release button halfway.

• The focus and exposure are set.

4Press the shutter-release button all the I I

way. _I

• ::leoSr:Lf_tlme: iSr__.i;s,ha:if_r_l_.,: uh_ :: ° fs I _-1

rdeased isdisplayed. The self-timer lamp _1 C:7

released, the lamp stops blinking and

remains lit.

• When the shutter is released, the self-timer

turns OFF. g

• To stop the timer before a picture is taken,

press the shutter-rdease button again.

Features That Can Be Set Using the Multi Selector

Using Macro Mode

When using macro mode, tile camera carl focus on subjects as close as 1 cm

(0.4 in.) from the front of the lens.

This feature is useful when taking close-up pictures of flowers and other small

subjects.

1 Press • (_ macro mode) on the multi

selector.

2Press the multi selector • or • to select ON

and press the _ button.

• The macromode icon_ isdisplayed.

• Ifthe_) button isnot pressedwithin afew seconds,

theselectionwill becanceled.

3Use the zoom buttons to set the zoom ratio to .......'_J"m

a position where _ and the zoom indicator [l_B ,_ _ I

light in green.

• Howcloseyou carl beto the subjectwhen shooting

dependsonthe zoom ratio.

Whenthezoom ratioissetto aposition where _ andthe zoom indicator light in

green,the cameracanfocuson subjectsascloseas 10cm (4 in.)from the lens.Atthe

zoom position between the maximum wide-angleposition and_ icon,the camera

canfocuson subjectsascloseas 1cm (0.4in.)from the lens.

_1_ Note on Using the Flash

The flash may be unable to light the entire subject at distances of less than 50 cm (1 ft 8 in,),

[] Autofocus

In the I_1 (auto) mode, you car/focus without pressing the shutter release button halfway by setting

Autofocus mode in the shooting menu (_51) to Full-time AF.

When using other shooting modes, Full-time AF is turned on automatically when macro mode is

turned on.

You may hear the sound of the camera focusing.

[] The Macro Mode Setting

•Macro mode cannot be used when using certain shooting modes, See "Available Functions"

(_53) and "Default Settings" (_59) for more information.

• The changed macro mode setting applied in I_1 (auto) mode is saved in the camera's memory

even after the camera is turned off.

Features That Can Be Set Using the Multi Selector

Exposure Compensation (Adjusting Brightness)

By adjusting exposure c:ompensation when taking pictures, you can adjust overall

image brightness.

1 Press i_ (ff-_ exposure compensation) on the

multi selector.

2Press the multi selector • or • to select a I _1

compensation value.

• To make the image brighter, apply positive (+)

exposure compensation.

• To make the image darker, apply negative ( ) exposure

compensation.

Exposure

compensation value

3Pressthe_ button.

• If the _) button is not pressed within a few seconds, the selection is set and the

setting menu disappears.

• Even when the shutter-release button is pressed without pressing the _) button, a

picture can be shot using the selected compensation value.

• When an exposure compensation value other than 0.0 is applied, the value is

displayed with the _ icon on the monitor.

4Press the shutter-release button to take a Ell

picture.

• Toturn offexposurecompensation, return tostep 1,

change the value to 0.0.

[] Exposure Compensation Value

•The changed exposure compensation value applied in I_1 (auto) mode is saved in the camera's

memory even after the camera is turned off,

• When the shooting mode is the Fireworks show scene mode (_43), the exposure

compensation cannot be used,

Features That Can Be Set Using the Multi Selector

Default Settings

The default settings in eac:h shooting mode are described below.

•SimiJar information about scene mode can be found on the next page.

Shooting mode

I_ (Easy auto mode)

(C338)

Special effects

([_47)

[] (Smart portrait)

(_]49)

I_I (Auto mode)

(C351)

Flash mode

(IZ354)

iAUTOI

iAUTO3

iAUTO

Self:timer

mode

(iZ_56)

OFF

OFF4

OFF

_'7_"_ Exposure

Macro mode Compensation

(EEl57) (EEl58)

OFF2 0.0

OFF 0.0

OFF2 0.0

OFF 0.0

1 _AUTO(auto) and (_ (off) can be selected. When _AUTO(auto) is selected, the camera selects

the flash mode appropriate for the scene it has automatically selected.

2 The setting cannot be changed.

3 Cannot be used when Blink proof is set to On.

4 Can be set when Smile timer is set to Off.

• Tile setting applied in I_1 (auto) mode is saved in tile camera's memory even

after tile camera is turned off (except for self-timer).

Otros manuales para COOLPIX AW100

Tabla de contenidos

Otros manuales de Cámara digital de Nikon

Nikon

Nikon D4s Instrucciones de instalación y mantenimiento

Nikon

Nikon N1530 Manual de usuario

Nikon

Nikon COOLPIX 600 Manual de usuario

Nikon

Nikon COOLPIX 885 Instrucciones de instalación y funcionamiento

Nikon

Nikon CoolPix 3100 Manual de usuario

Nikon

Nikon D90 - Digital Camera SLR Manual de usuario

Nikon

Nikon CoolPix S8100 Guía del usuario

Nikon

Nikon COOLPIX L1 Manual de usuario

Nikon

Nikon S5100 Manual de usuario

Nikon

Nikon COOLPIX S8000 Guía del usuario

Nikon

Nikon Nikkormat FT2 Manual de usuario

Nikon

Nikon D40X Manual de usuario

Nikon

Nikon COOLPIX 56300 Manual de usuario

Nikon

Nikon COOLPIX S800c Manual de usuario

Nikon

Nikon Coolpix 4600 Manual de usuario

Nikon

Nikon Coolpix S230 Manual de usuario

Nikon

Nikon VAA35001 Coolpix S1 Instrucciones de funcionamiento

Nikon

Nikon COOLPIX 600 Manual de usuario

Nikon

Nikon Z 6 Manual de usuario

Nikon

Nikon CoolPix 4100 Manual de usuario

Nikon

Nikon COOLPIX S4000 Manual de usuario

Nikon

Nikon CoolPix 3200 Manual de usuario

Nikon

Nikon CoolPix S3 Manual de usuario

Nikon

Nikon CoolPix P7000 Manual de usuario

Manuales populares de Cámara digital de otras marcas

Mercury

Mercury 350K Manual de usuario

Pentax

Pentax Optio LS 465 Manual de usuario

Sanyo

Sanyo VPC-S1085 Manual de usuario

GE SMART A1255 Manual de usuario

Point Grey

Point Grey Gazelle Manual de usuario

Pentax

Pentax P-5 Manual de usuario

BlazeVideo

BlazeVideo A280 Manual de usuario

Sony

Sony MCA-20 Manual de usuario

Sony

Sony Alpha DSLR-A290 Manual de usuario

ATIK Cameras

ATIK Cameras One Manual de usuario

CohuHD Costar

CohuHD Costar 3930 Series Manual de usuario

Leica

Leica M10-R Manual de usuario

FujiFilm

FujiFilm FinePix A700 Manual de usuario

Lorex

Lorex LNZ81P25 Series Manual de usuario

GE J1470S Manual de usuario

Sony

Sony A6700 Guía del usuario

Canon

Canon EOS ELAN7 Manual de usuario

Samsung

Samsung SCC-C4253 Manual de usuario