Niigata seiki BB-180A Manual de usuario

ON/OFF

ABS/ZERO

HOLD

Bevel Box

180A

HOLD

ON/OFF ABS/ZERO

HOLD

Bevel Box

180A

HOLD

ON/OFF ABS/ZERO

HOLD

Bevel Box

180A

BEVEL BOX Model No.：BB-180A

Thank you for purchasing the Bevel Box Digital Angle Meter.

Please read this manual thoroughly before use for proper operation.

INSTRUCTION MANUAL

Digital

Angle Meter

Precision angle measurement and

working reference for assembly of

machinery, tooling, jigs, etc.

Magnetic base

In Relative Mode, Zero-point can be set

at any position.

Origin can be set and stored for use in

Absolute Mode.

Hold function to freeze display.

Auto Power Off feature (approx. 5 minutes.)

●

This is a precision instrument - Handle

With Care. Do not drop or subject to

shock.

Do not shake or rotate violently. Internal

components can not respond to rapid

motion and zero-point may shift.

If subject to abrupt motions, please

reset zero-point using procedure

described in “Setting the Zero-point”

or “Setting the Origin”sections.

Do not engrave or mark with electric pen.

Do not use or store in places subject to

extreme temperate fluctuations, direct

sunlight, dusty locations, or locations

that are wet or have high humidity.

●

■PART IDENTIFICATION

■HOLD FUNCTION

CR2032 Lithium Battery (1×)

±0.2°

0.1°

BB-180A

±180.0°

approx.170g

approx.5 〜45℃

Absolute, Relative

・Storage Case

・CR2032 Lithium Battery

(for test)

■

APPLICATIONS and FEATURES

■SPECIFICATIONS

CAUTION

LCD Display

Battery Cover

INSERTING BATTERY

Magnets

[ABS/ZERO]Button

[ON/OFF]Button

[HOLD]Button

Measurement Surface

【Rear・Bottom】

【Front】

Rotate Cover in direction

of arrow to open. Insert

CR2032 Lithium Battery

with (+)side outward and

replace cover.

Press [HOLD]to freeze the value on the display.

Press [HOLD]a second time to release.

Press [HOLD]Button

Display value is held

Model No.

Measurement Range

Resolution

Accuracy

Repeatability

Operating

Temperature Range

Weight

Power Supply

Accessories

Measurement Modes

True Horizontal Surface, Confirmed

By Reference Level

ABS

ON/OFF ABS/ZERO

HOLD

Bevel Box

180A

ABS

ON/OFF ABS/ZERO

HOLD

Bevel Box

180A

ABS

ON/OFF ABS/ZERO

HOLD

Bevel Box

180A

ABS

ON/OFF ABS/ZERO

HOLD

Bevel Box

180A

ON/OFF ABS/ZERO

HOLD

Bevel Box

180A

ON/OFF ABS/ZERO

HOLD

Bevel Box

180A

(Figure:

)

(Figure:

If any of the following symptoms appear, please cycle

power by removing and replacing battery, or replacing

battery with a fresh one.

※If problem persists, or if you have any questions, please contact

distributor or place of purchase.

※

Please note, manufacturer is unable to respond to inquires or provide

service directly. Please contact distributor or place of purchase.

1507

①Press [ON/OFF]to turn on power.

②Press [ABS/ZERO]to display “ABS”icon on

LCD display.

③Place the Gauge on a horizontal surface, as

confirmed by a reference level, and press and

hold the [ABS/ZERO]Button for > 2 sec.

④The LCD will display 0.0°, and the origin is now set.

Note:

●When battery is replaced, origin will go to

default setting. Please set again.

In absolute mode, the origin can be stored in memory.

Once set, even when power is off the origin is saved and does not have to be reset with each use.

Place the measurement surface of the gauge

onto the object to be measured. (Figure:2)

Direction of tilt icon will display next to measured

value -

If tilt is to left, icon will display.

If tilt is to right, icon will display.

【ABSOLUTE MEASUREMENT MODE】

①Press [ON/OFF]to turn on power.

②With “ABS”icon displayed on LCD, place the

gauge on a flat reference surface and press

the [ABS/ZERO]button (less than 1 sec).

③The LCD will display “0.0°”, and the “ABS”

icon will go off. (Figure:3)

Place the measurement surface of the gauge

onto the object to be measured. (Figure:4)

Direction of tilt icon will display next to measured

value -

If tilt is to left, icon will display.

If tilt is to right, icon will display.

In Relative mode, 0°

point can be set at any angle.

【RELATIVE MODE】

■TROUBLESHOOTING

I251-K

Setting the origin: ABS display

How to use

Setting the zero-point:

How to use

Tilted 10°to left

from horizontal.

Tilted 10°to right

from horizontal.

●No display. ●Displayed reading is in error.

●Displayed value does not change as gauge is moved.

Reference Surface

Tilted 5°to left from

reference surface.

Tilted 5°

to right from

reference surface.

Short Press

Display is 0.0°, and “ABS”icon goes

１

２

Press for ＞2 sec.

Niigata seiki Co., Ltd.

6-15-22, Tsukanome, Sanjo, Niigata, Japan, 955-0055

Tel. : +81-256-31-5660 Fax. : +81-256-39-7730

MAIL:[email protected]

URL http://www.niigataseiki.co.jp

(Figure:

)

(Figure:

)

Otros manuales de Instrumento de medición de Niigata seiki

Niigata seiki

Niigata seiki GDCS Series Manual de usuario

Niigata seiki

Niigata seiki GDCS-150NP Manual de usuario

Niigata seiki

Niigata seiki CJU BKD Series Manual de usuario

Niigata seiki

Niigata seiki DP-180 Manual de usuario

Niigata seiki

Niigata seiki DTW-DG02 Manual de usuario

Niigata seiki

Niigata seiki WCDI-50D Manual de usuario

Niigata seiki

Niigata seiki QEM394 Series Manual de usuario

Niigata seiki

Niigata seiki JLVC-30 Manual de usuario

Niigata seiki

Niigata seiki EOM133 Series Manual de usuario

Niigata seiki

Niigata seiki SCDI S Series Manual de usuario

Niigata seiki

Niigata seiki EOM133 Series Manual de usuario

Niigata seiki

Niigata seiki WCDI-50 Manual de usuario

Niigata seiki

Niigata seiki SCG Series Manual de usuario

Niigata seiki

Niigata seiki CJU BKD Series Manual de usuario

Niigata seiki

Niigata seiki GDCS-150IK2 Manual de usuario

Niigata seiki

Niigata seiki WDI-10KD Manual de usuario

Niigata seiki

Niigata seiki CDI-18D Manual de usuario

Niigata seiki

Niigata seiki KAIDAN GVC-10 Manual de usuario

Niigata seiki

Niigata seiki MCA S Series Manual de usuario

Niigata seiki

Niigata seiki MCD130-25 Manual de usuario

Niigata seiki

Niigata seiki GDCS-150DCD Manual de usuario

Niigata seiki

Niigata seiki GDCS-150D Manual de usuario

Niigata seiki

Niigata seiki DP-90G EX Manual de usuario

Niigata seiki

Niigata seiki LEVELNIC Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario