3
1.Product Summary
1.1 Overview
This product is a communication interface unit compatible with communication protocols of various ECU.
Bidirectional communication with the ECU can be easily done by selecting the communication mode corresponding
to the ECU and operating the command by the host computer.
1.2 functions and features
1) High-speed CPU board installed
This unit is equipped with a high-speed CPU board to support high-speed processing and improved functions.
< Overview of CPU1 (SH4) board >
・High-speed CPU installed:Renesas SH4-SH7750R (CPU clock :235 MHz)
・Ethernet (10/100base-T) controller with two mounted
・CAN port is all 17CH(CAN-M, CH1-16) equipment (standard / enhanced format compatible)
・LIN master(LINA), slave(LINB) equipment
・Equipped with DOUT (16Bit)
・Communication indicator equipment(LINA, LINB, CAN-MA, CAN-MB, ERROR-M)
（CAN-CH1 to CH16､ERROR-CH1 to CH16）
2) Firmware update function installed
・Firmware update such as function expansion realized easy operation via Ethernet.
3) All communication circuits are designed for isolation
・The communication circuit (CAN, LIN) realizes interference free from the sample power supply system
due to isolation between the each channeland the enclosure.
4) CANalyzer / CANape compatible function (CAN communication mode)
・CANalyzer / CANape definition file (* .dbc, db) realize the label specified and physical quantity conversion
of READ / WRITE data by downloading.
・Communication with ECUs with built-in CCP / XCP drivers is possible.
・Compatible with various CAN repro protocols.
5) LIN master / slave function installed
・Simultaneous processing of LIN master function and slave function.
・Reprogram the device with the LIN master and implement the calibration function.
8) CAN / SENT / LINdata record function
・Equipped with a record function that records data in real time with a time stamp.
・CAN data can be recorded for up to 330,000 samples.
・Implemented many statistical processing commands for recorded data.
