6. Continuous Data Import Screen
Select the "CONT_DATA_TRANSFER button" in the menu to display the continuous data import screen.
(1) Measurement display (1.a)
Upper/lower judgment marks: Compared to the values specified in the user
setting, indicates the upp
er limit mark when the upper limit value is less than the
measurement value, and the lower limit mark when the lower limit value is more than
the measurement value.
(1.b)
Measurement unit: Indicates the unit specified in the user setting, and indicates
"OVER" when the measured value exceeds the measurement range.
Measurement value: Indicates the measurement value (6 digits + decimal point).
When the measurement value exceeds 999999, indicates "------" (hyphens).
(2) Statistics Data For the imported measurement data, ind
icates the maximum value, minimum value,
average value, standard deviation, the number of measurement
measurement start, end time. Updates during measurement.
For the average value, when the integer part of the calculated result has x digits, the
number of digits after decimal point becomes 6-x.
(3) Import control setting Import start trigger: After the measurement value exceeds the user defined Start
Trigger, importation of data begins
Import time limit: Importation ends when the user defined limit (sec), setting value has
elapsed.
Upper/lower judgment values: Indicates the upper/lower judgment values specified in
the user setting screen.
Indicates the measurement interval specified in the system setting.
(5) File Save button Generates the save destination folder selection screen.
Saves the measurement data being displayed and statistics data (Max./Min./Ave./SD)
to the file in the CSV format.
(6) Restore button Indicates the file selection screen.
Creates a new block, and reads the selected measurement data into it.
(5) File Save button
(2) Statistics Data
(4)Measurement interval(3)Import control setting
(1) Measurement display
(6) Restore button
Stop button
(8) Clear Block button
(9) Data Select button
(10) Graph button
(11) Block tab
(12) Measurement data
(1.a)
(1.b)
