Nicotra Gebhardt FAN Commander 200 Manual de usuario

Operating Manual “FAN Commander 200” ECE 03-0200-5E-MG Seite 1 on 24

Operating manual EN

FAN Commander 200

BA-ECE 03 – Release 2020-04-06

ECE 03-0200-5E- M

D 155444 D 155445

Operating Manual “FAN Commander 200” ECE 03-0200-5E-MG Seite 2 on 24

Warn

ing

Present operating manual is a part of the product.

Before installing and using you ha e to read all safety

instructions, warnings and cautions carefully. Make

sure that the warning labels are in readable

conditions, replace missing or damaged ones.

Contact data for further information

Nicotra Gebhardt GmbH

Gebhardtstraße 19-25 Phone: +49 (0)7942 / 101 - 0

74638 Waldenburg

Germany E-Mail: Info.ng.de@regalbeloit.com

Table of Content

General Information....................................................................................................... 3

O er iew ....................................................................................................................... 6

Features ........................................................................................................................ 6

3.1

Basic features of the de ise .................................................................................... 6

3.2

Inputs and Outputs ................................................................................................. 6

3.3

Fan Network – RS485 link ...................................................................................... 7

Installation ..................................................................................................................... 8

4.1

Ambient Operating Conditions ................................................................................ 8

4.2

Mechanical Installation ........................................................................................... 9

4.2.1

Wall-Mounted Style .......................................................................................... 9

4.2.2

Counter-Sunk Style .......................................................................................... 9

4.3

Electrical Installation ............................................................................................. 10

4.3.1

Connection O er iew ..................................................................................... 10

4.3.2

Description Connection .................................................................................. 11

4.3.3

Connection Details ......................................................................................... 11

4.3.4

Connection Example ...................................................................................... 14

4.3.5

Wiring of Nicotra Gebhardt FFU Controller .................................................... 15

Working with the FC 200 ............................................................................................. 16

5.1

Software ............................................................................................................... 16

5.2

Commissioning ..................................................................................................... 17

5.2.1

Quick Commissioning – fan dri en by speed setting ...................................... 17

5.2.2

Quick Commissioning – fan dri en by closed loop control ............................. 17

Technical Data ............................................................................................................ 18

6.1

Connection ........................................................................................................... 18

6.2

Housing ................................................................................................................ 18

6.3

Ambient Operating Conditions .............................................................................. 18

6.4

IN/- and OUTPUTs ............................................................................................... 19

6.5

Fan Network ......................................................................................................... 19

Additional Hints ........................................................................................................... 20

7.1

Manufacturing ....................................................................................................... 20

7.2

Packing and Shipping ........................................................................................... 20

7.3

Ser ice .................................................................................................................. 20

Notes ........................................................................................................................... 21

Operating Manual “FAN Commander 200” ECE 03-0200-5E-MG Seite 3 on 24

1 General nformation

Definition and Meanings

For all different safety instructions special symbols are used in this manual.

Follow all hints and warnings to a oid any injury or material damage. The user of the

de ice is fully responsible.

Warnings

„Warning“ indicates that death, se ere personal injury or extensi e

property damage can result if proper precautions are not taken.

Danger

„Danger“ indicates an immediate risk of electric shock which will

result in death, injury or serious damage if the applicable safe

regulations are not followed

Caution

The symbol refers to a possible hazardous situation that could

cause material or en ironmental damage.

Recommendation and useful information and ad ices for an efficient

operation free of malfunctions and faults.

Qualified personal only

Only qualified person(s) must operate with the present de ice. This qualified personal

must be familiar to these types of products and associated with danger and risks,

authorized to install, mount, commission and use these types of product.

Designated use

Use this de ice only in the manner intended by the manufacturer, according to the manual

and only in combination with the described products only.

Safety nstructions

All Warnings, Cautions and Hints shown in this document are pro ided for your safety and

as a means of pre enting damage to the product. This section lists Warnings, Cautions

and Hints, which apply generally when handling the FC 200, classified as General,

Transport & Storage, Commissioning, Operation, Ser ice and Repair. Specific Warnings,

Cautions and Hints that apply to certain specific chapters are listed at the beginning of the

rele ant chapters. Please read the information carefully, since it is pro ided for your own

personal safety and it will also help prolong the ser ice life of your product.

Operating Manual “FAN Commander 200” ECE 03-0200-5E-MG Seite 4 on 24

Warn

ing

This equipment controls potentially dangerous rotating mechanical

parts. Noncompliance with Warnings

or a miss to follow the

instructions contained in this manual can result in loss of life, se ere

personal injury or serious damage to property.

Only suitable qualified personal

should work on this equipment,

and only

after becoming familiar with all safety notices, installation,

operation and maintenance procedures contained in this manual.

The successful and safe operation of this equipment is

dependent

upon its proper handling, installation, operation and maintenance.

Children and the general public must be pre ented from accessing

or approaching the equipment!

nformation

Keep these operating

instructions within easy reach of the

equipment and

make them a ailable to all users. Whene er

measuring or testing has to be

performed on li e equipment suitable

electronic tools should be used.

Before installing and commissioning, please read these saf

ety

instructions and

warnings carefully and all the warning labels

attached to the equipment.

Transport & Storage

Warning

Correct transportation and

storage, erection and mounting, as well

as careful operation and maintenance are essential for proper and

safe operation of the equipment.

Protect the de ice against physical shocks and ibration during

transport and

storage. Also be sure to protect it against water

(rainfall) and excessi e temperatures.

Operating Manual “FAN Commander 200” ECE 03-0200-5E-MG Seite 5 on 24

Commissioning and Operation

Warn

Use for intended purpose only.

The manual of the controlled fan

regardless whether type of fan it

is, is unconstrained by

advices in this manual, especially in questions of safety.

Some

parameter and settings lead to automatic restart of controlled fan

after switch-on.

Service & Repair

Warn

Repairs and Ser ice on the de ice may only be carried out or

ad ised by

Approbations

All de ices of the FC 200 series are manufactured according

D RECT VE 2011/65/EU on the restriction of the use of certain hazardous

substances in electrical and electronic equipment

under consideration of the following harmonized standard:

EN 50581:2012.

Operating Manual “FAN Commander 200” ECE 03-0200-5E-MG Seite 6 on 24

2 Overview

All de ices of brand FC 200 (ECE 03-0200-5E-MG) are a stand-alone monitoring and

control unit for up to 200 fans with RS485-based interface of different brands.

A clear and simple menu guide has been realised bilingual (English/German) and offers a

ery easy access to 2 separate, free configurable and indi idual operating closed loop

cycles (Volume, Pressure, Temperature …).

The de ices are chose able as IP65-wallmounted solution or IP20-counter sunk design

a ailable with identic functions as well as customized OEM-solution in front design and

software.

3 Features

3.1 Basic features of the devise

main supply 24V DC @ 100 mA

Usage/addressing Standalone de ice for monitoring and control of up to 200

fans

Addressing 0(1) … 99(100) according to applied field bus

Temperature 0°C … 40°C operation (32°F … 104°F)

-20°C … 70°C storage temperature (-4°F … 158°F)

Display Amber colored full graphic display

Access easy access push encoder (IGR)

Time base Real-time-clock

3.2 nputs and Outputs

3 Digital Inputs (DIs) day-/night

DI1

DI2

for day/night shift

for external enable of group1

for external enable of group2

trigger +24V  DI

2 Digital Outputs (DOs) Error

contact1

Error

contact2

“error”

for acknowledged, but still existing faults

“new error”

for new, unacknowledged faults

programmable as low-acti e or high-acti e

maximum contact load:

60V/500mA (peak AC / DC)

Operating Manual “FAN Commander 200” ECE 03-0200-5E-MG Seite 7 on 24

2 Analogue Outputs (AOs) +10V

+24V

for sensor or potentiometer supply internal

connected on 2 contacts (group 1 / 2)

maximum load in total

20mA (peak AC / DC)

for sensor supply internal connected on 4

contacts

maximum load in total

100mA (peak AC / DC)

2 Analogue Inputs (AIs) AI1

AI2

external sensor- or set alue input of group1

external sensor- or set alue input of group2

3.3 Fan Network – RS485 link

Interface Line 1

Line 2

2 identical lines - fieldbus - programmable

Nicotra||Gebhardt – odbus, GBUS

Hardware Transcei er acc. RS485 specification

Half duplex

1/8 Load up to 256 nodes (subscriber limited to 100 per line)

maximum 400m line length

Data Baud rate: 9600, 19200, 38400, 57600

Parity: none, e en, odd

Stop bits: 1, 2

Features set alues speed

enable

maximum speed

minimum speed

fault

(depending on chosen fan brand)

Operating Manual “FAN Commander 200” ECE 03-0200-5E-MG Seite 8 on 24

4 nstallation

Warning

Installation of the FC 200 by qualified personal only. This

qualified personal must be familiar to these types of products

and associated with danger and risks, authorized to install,

mount, commission and use these types of product.

Some parameters can cause a start of connected and

powered fans, without any further confirmation required

(scheduler, day/night shift …).

The de ice is fed be safety extra-low oltage (SELV) and

matches to protection class .

4.1 Ambient Operating Conditions

De ices of the FC 200 series are designed and

manufactured for indoor installation.

Wall mounted ariation ha e with closed lid IP 65

(en ironmental protection class). De ices in counter-sunk

style rated as IP20, additional sealed, transparent lid

a ailable on request

Shock

Warn

Do not drop the de ice or expose to sudden shock.

Do not use the de ice in an area where it is likely to

be exposed to constant ibration higher than

2,5 mm*s

-1

Temperature

Warn

Do not use de ice outside temperature range of 0°C … 40°C

(32°F … 104°F)

Electromagnetic Radiation

Warn

Do not use the de ice near sources of

electromagnetic radiation.

Operating Manual “FAN Commander 200” ECE 03-0200-5E-MG Seite 9 on 24

4.2 Mechanical nstallation

4.2.1 Wall-Mounted Style

dimensions

in mm

drill pattern

in mm

4.2.2 Counter-Sunk Style

required mounting section: 137x68 mm

160

166

106

144

122

Operating Manual “FAN Commander 200” ECE 03-0200-5E-MG Seite 10 on 24

4.3 Electrical nstallation

4.3.1 Connection Overview

Tabla de contenidos

Otros manuales de Controladores de Nicotra Gebhardt

Nicotra Gebhardt

Nicotra Gebhardt EKE 10-0070-5E-IM Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario