Nexxt XPY330 Manual de usuario
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter
2
Integrated Wireless IP Camera
with IR cut-off filter
INTRODUCTION
Thank you for purchasing the Nexxt Solutions XPY
330 Camera. Featuring an infrared cut-off filter,
our new XPY is an integrated wireless IP Camera
solution that combines high quality digital video with
network connectivity and a powerful web server
to bring a clear picture to your desktop or mobile
phone from anywhere on your local network or over
the Internet.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter
3
This camera is intended for indoor use only.
Use the supplied power adaptor to connect the
camera to the AC mains (5.0V DC, 1.5A).
The warranty does not cover any damage caused
by applying the wrong voltage.
Never attempt to disassemble the unit. The warran-
ty does not cover damages as a result of tampering
with, or the improper alteration of the device.
Do not point the camera at the sun or at any other
strong light source.
Do not install the camera where it can be exposed
to rain or water
Wait at least 10 seconds when powering the
camera on and off. Otherwise, it can cause serious
damage to the CPU.
When updating the camera, please make sure that:
the camera is connected directly to a computer
using a network cable;
all other programs and windows on the computer
have been closed;
the camera remains connected during the entire
firmware update.
•
•
•
•
•
•
•
-
-
-
BEFORE YOU BEGIN
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter
4
FEATURES
The camera combines a high-sensitivity 1/4 CMOS
image sensor, an advanced IR cut-off filter with a
powerful wireless web server in order to capture
lifelike images from anywhere, and to transmit
them instantly on your local network or over the
internet.
Can be used on WiFi or wired networks.
It uses the H.264 hardware compression tech-
nique, which can display high-quality and real-time
video transmission at 25FPS on a LAN/WAN
connection.
Selectable image resolution of 640x480 and
320x240 pixels.
The system can be expanded at any time by adding
multiple cameras.
Input and output ports with smart motion detection
to connect sirens, smoke detectors, door sensors
or any other external alarm devices.
Two-way audio capability with built in speaker and
microphone.
Convenient micro SD memory card slot for saving
recorded images.
View multiple cameras in split screen view or
choose full screen in order to monitor the activity
from a single camera.
Cameras can be viewed via standard PC or Mac
browsers, including Internet Explorer, Safari,
Chrome and Firefox.
Infrared LEDs for night vision (up to 15 meters).
Includes multi-level user management system,
which can be configured with passwords for
controlled access.
Easy- to-use web browser controls. They also allow
•
•
•
•
•
•
•
•
•
•
•
•
•
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter
5
NOTE: if any of the listed items are missing or
damaged, please notify immediately the Nexxt Solutions
reseller from whom you purchased the product for
replacement or warranty information.
IP camera setup should be completed on a
Windows PC only using Internet Explorer.
Live viewing, taking snapshots, recording and
camera configuration are fully supported on
computers with Windows operating systems.
Wireless IP Camera x1
Wi-Fi antenna x1
AC power adaptor x1
Quick installation guide x1
CD-ROM x1
(includes the IP Super Client software)
Network cable x1
Mounting bracket and hardware
•
•
•
•
•
•
•
•
•
-
-
NOTES ON WINDOWS AND MAC COMPATIBILITY:
PACKAGE CONTENTS
quick configuration changes via the Settings menu.
Compatibility with smartphones enables remote
surveillance and camera control in real-time from
any location.
Supports image snapshots and image forwarding
via email and FTP upload.
Mac users are only able to:
- view live images via compatible web browsers
including Safari, Firefox and Chrome, but are limited
to streaming video from one camera at a time.
Open the box and make sure all items listed below
are included:
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter
6
Our WiFi Pan and Tilt Camera can be set up in
minutes for instant monitoring and live viewing on
your Windows computer and 3G Smartphone - all
via your wireless network router or switch. For
optional recording capabilities, simply install the IP
Super Client software in your Windows PC and
configure it according to your particular needs.
1. Begin by screwing the bracket to the camera.
Connect the camera using the power adaptor that
comes with the product.
2. Using a standard Ethernet network cable,
connect the camera to your network.
The camera can either be connected to a router/
switch or directly to a PC with an Ethernet network
cable. We recommend setting up the camera on
your network using a wired connection prior to using
the device in a wireless configuration.
Step 1: Connect one end of the network cable to
the RJ45 interface of IP camera.
CAMERA INSTALLATION
INTERNET
Cellular
Phone
IP Camera
Modem
PDAComputer
Intranet
Internet connection
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter
7
Step 2: Connect the other end of the network cable
to the Ethernet switch, router or IP sharing device.
Step 3: Plug the power cable to the wall outlet and
turn on the device.
3. The camera can also be connected to a
computer directly.
Step 1: Connect one end of the network cable to
RJ45 interface of IP camera
Step 2: Plug the power adapter to the DC jack of
the IP camera and turn it on.
4. Continue with the setup of the camera (as
described in the following chapter). Once the
camera has been successfully connected to your
network, it can be mounted on the wall or ceiling
using the wall plugs and screws included with the
device. (The camera set up must be performed
using Windows operating system only.
ComputerIP Camera
Direct Connect
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter
8
Please note that if you are using the camera on
a wireless network, you will need to configure the
camera for wired use, prior to configuring
wireless settings in the device (later described in
this manual).
SYSTEM REQUIREMENTS
Minimum Hardware Configuration
CPU: Pentium 1.6GHz
Memory: 256MB
Sound Card: for audio monitoring and
two-way communication
Hard Drive: to record video, minimum 40 GB
Software environment
System: 32 or 64 bit Windows2000/WindowsXP/
Windows2003/Windows Vista/Windows 7Mac
OS etc. Browser: Internet Explorer/Mozilla Firefox/
Google Browser TCP-/IP network protocol.
Accessing the IP camera
Using the IP Super Client Software
Note: The IP network camera is designed to work in
a local area network (LAN) or over the internet. For
the first method, we highly recommend using the
software included in the supplied CD. The installation
steps are described below.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter
9
Introduction
The IP camera Super Client is an easy-to-use soft-
ware designed for surveillance applications with
multiple cameras. This software includes PT con-
trols, recording, alarm notifications, in addition
to a central management feature that allows the
administration, configuration and access control
settings for each individual device.
Functions:
*Supports up to 81-video monitoring in one screen.
*Supports multi-level structured device list.
*Supports scheduled recording with alarm.
*Supports panoramic recording.
*Supports motion detection, sound alert and
external alarm trigger.
*Supports audio, SMS, SMS modem, dialing, email,
FTP and alarm output switch.
*Supports inquiries, browsing of alarm and
operation log records.
*Supports multi-level access management.
*Supports remote login to check records and
alarm records.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter
10
Adding devices
After installing the client software, we need to add
the devices. When running the program, the device
list on the right of the main interface is empty; there
is a guide to show you how to add the devices.
Click the right button to choose “add new device” or
“add new group”. This program supports a
multi-level structure to manage existing devices.
Now, let’s take the 300-series and 330-series as
examples to introduce the adding device option.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cámara IP de Nexxt
