Nexxt Solutions NHB-S615 Manual de usuario
Smart Wi-Fi TV backlight
for 55-65" TV’s
NHB-S615
RGBIC
Cheers!
Congratulations on purchasing Nexxt Home’s Smart Wi-Fi TV backlight.
Before you open the box, check out this manual so you can get the most out of
your new device.
What’s in the box
• Camera
• Camera power adapter
• LED strip lights
• 10 fasteners
• User manual
If any of the listed items is broken or missing, contact us immediately. Go to
www.nexxtsolutions.com/connectivity/support/contact-us where you’ll nd
several ways to get in touch with our support team.
English
Camera: A quick view
2. Indicator light
3. USB-C port
4. Power port
5. Strip light port
To signal the status of device
To connect an extra device, such a light bar
(extra device not included)
To connect to a power source
To connect the LED strip light
Button / port / light Description
1
2
3
4
5
1. On/off button a. Press to turn on/off.
b. Reset function: To reset the camera, press this
button for 5 seconds until a green light ashes.
Then, it will turn solid green and the light strip will
begin to ash fast in red, indicating that the device
is ready to pair.
Note: If the LED strip ashes red slowly, repeat
the procedure described in point "b".
Installation
English
4 5
Back of TV/PC monitor
3. Stick the strip light rmly on the back of the TV, as shown below. Please
follow the direction of the arrows on the strip light.
Note: Although the graphic below shows the strip initial end was placed on
the bottom left corner, you can place it on any corner of the TV, clockwise or
anticlockwise. Go to the Calibration section for more details.
4. Insert the strip lights cable and then power into the port hub at the end of
the camera cable, as shown below .
Once all connections are set up, you’ll be ready to complete the Nexxt Home
app conguration and the strip light calibration.
2. Position the camera exactly in
the middle of the top of the TV.
Use a tape measure to determine
this point. Remove the lm cover-
ing the double-sided tape at the
bottom of the camera. Then, stick
it on the determined middle point
on the TV and tighten the base
with the clip located in the back.
1. Wipe the installation surface
(normally the back of the TV) to
make sure it’s dry and clean.
English
6 7
Installing the Nexxt Home App
Download Nexxt Home app on Google Play or Apple App Store. Step 1
Register by email. Fill in the required elds.
60 %
9:41 AM
Nexxt Home
Nexxt Solutions Home App
Cancel
GET
Accvent LLC
Log in with existing account
Create New Account
SOLUTIONS
Iniciar sesión con cuenta existente
Crear Cuenta Nueva
SOLUTIONS
60 %
9:41 AM
Nexxt Home
Nexxt Solutions Home App
Cancel
INSTALL
Accvent LLC
60 %
9:41 AM
Register by email
United States of America
Email
Get authentication code
English
8 9
Step 2
Enter the verication code you received.
Step 3
Create a new password and then select Completed.
60 %
9:41 AM
Enter verication code
Verication code has been sent to your
60 %
9:41 AM
Set Password
Completed
6-20 characters, including letters and numbers
English
10 11
Step 4
The Nexxt Home App has been successfully installed.
Adding the strip light
Step 1
Before you start the pairing process, you must reset the product manually. For more
details, see the section of button descriptions.
Select Add device and then click on the blue button. However, if the device is not
recognized automatically, select the Smart TV Backlight icon from the list and continue
to the next step.
60 %
9:41 AM
60 %
9:41 AM
60 %
9:41 AM
60 %
9:41 AM
English
12 13
Verify that the Smart TV Backlight is powered on. You must connect it to a 2.4GHz Wi-Fi
network. Enter the network password.
Step 2
Once the Smart TV Backlight is detected by the application, the notication Device
added successfully will be displayed on the screen.
Step 3
60 %
9:41 AM
60 %
9:41 AM
60 %
9:41 AM
English
14 15
1. Device setup instructions: Make sure the cable connections are ok and the camera is
securely placed above the screen. To ensure a proper calibration, turn o the room light.
Then, turn on the TV screen so that the camera can detect a reference image. Then, click
Next on the application.
Calibration
As soon as you add the light strip, you’ll be prompted to calibrate your device. Follow these
steps to complete the process.
2. Select strip corner position: Place yourself in front of your TV screen and select the
corner where you installed the starting end of the light strip. Then, click Next.
60 %
9:41 AM
60 %
9:41 AM
English
16 17
3. Select direction: Again, in front of your TV, choose the light direction: clockwise or
counterclockwise. Then, click Next.
4. Screen position calibration: On the top side of the interface, you’ll see a reference
image of what the camera captures. If it looks strange, it’s because the camera registers
your TV screen on a sheye-like image. At this point, you need to place 8 points on the screen
that correspond to the four screen corners and the middle point of every screen side.
The rst graphic above shows you exactly where to place those 8 reference points.
The second graphic shows what your screen would look like if it had the image of an
entire soccer eld.
60 %
9:41 AM
60 %
9:41 AM
60 %
9:41 AM
English
18 19
5. Completion. Check that the light colors correspond to the colors on the screen. If they
look ne, click Complete.
Once you nish the calibration, you’ll nd the Smart TV Backlight homepage, which
corresponds to the music note icon at the bottom menu ( ). This page shows you two
main options: Video Mode and Music Mode.
Main interface
60 %
9:41 AM
60 %
9:41 AM
Tabla de contenidos
Idiomas:
