Quick Installation
Quick Installation
22
22
33
33
44
44
55
55
66
66
IMPORTANT: Your External Modem is an electronic device. It
must be kept indoors and in a dry, cool, well-ventilated area.
IMPORTANT: Your External Modem is an electronic device. It
must be kept indoors and in a dry, cool, well-ventilated area.
When the Modem is powered off, use sim card ejector to push the but-
ton adjacent to the SIM card tray to eject it. Place the SIM card in the
tray with the chip facing up. Insert the SIM card tray with the SIM into
the Modem. Make sure the SIM card tray is all the way in.
Note: The Modem can only be used with a standard SIM; hence, if you
have a micro/nano SIM, please use the included SIM Card Adapter.
Warning: Do not install or swap the SIM card when the Modem is
powered on.
When the Modem is powered off, use sim card ejector to push the but-
ton adjacent to the SIM card tray to eject it. Place the SIM card in the
tray with the chip facing up. Insert the SIM card tray with the SIM into
the Modem. Make sure the SIM card tray is all the way in.
Note: The Modem can only be used with a standard SIM; hence, if you
have a micro/nano SIM, please use the included SIM Card Adapter.
Warning: Do not install or swap the SIM card when the Modem is
powered on.
Connect the included Mag-mount Antenna with the ANT SMA(f) port on
the Modem.
Alternate: A coupler can be used unequally to split the donor antenna
signal between the Modem and CEL-FI donor input.
Connect the included Mag-mount Antenna with the ANT SMA(f) port on
the Modem.
Alternate: A coupler can be used unequally to split the donor antenna
signal between the Modem and CEL-FI donor input.
Power on the Modem by plugging in the included AC adapter.
Power on the Modem by plugging in the included AC adapter.
Connect the LAN port on the modem with the LAN port on the Nextivity Solution
using Category Cable.
If the Modem Online LED is solid ON, your CEL-FI GO/QUATRA device is now online.
If not, the SIM may require custom APN and PIN settings. Continue to Step 5 to
configure them in Modem settings in Setup -> WAN.
Connect the LAN port on the modem with the LAN port on the Nextivity Solution
using Category Cable.
If the Modem Online LED is solid ON, your CEL-FI GO/QUATRA device is now online.
If not, the SIM may require custom APN and PIN settings. Continue to Step 5 to
configure them in Modem settings in Setup -> WAN.
Using a Category Cable, connect the Modem to your
PC. Open the browser on your PC and input the IP
address below with login credentials to access the
Modem settings.
IP Address: 192.168.1.1
Default Password: admin
Using a Category Cable, connect the Modem to your
PC. Open the browser on your PC and input the IP
address below with login credentials to access the
Modem settings.
IP Address: 192.168.1.1
Default Password: admin
Note: To prevent
unauthorized access to the
modem or disruption, ensure
to change the password
from default.
Note: To prevent
unauthorized access to the
modem or disruption, ensure
to change the password
from default.
Insert your SIM card
Insert your SIM card
IInstall the Cellular Antenna
IInstall the Cellular Antenna
Power Supply
Power Supply
Connect the Nextivity Solution
Connect the Nextivity Solution
Change Modem login Password
Change Modem login Password
