Nexo VNI-WS10 Manual de usuario
- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
PAGE 1 OF 4
VNI-WS10
DP3422/Rev01 - DI
PS10 Wall Bracket
Contents:
X1 (Arm)
X1 (Adapter)
X1
X3
X2
X1
X1
X1
X1
X1
Weight: 1.35 kg / 3 lb
All manuals and user guides at all-guides.com
- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
PAGE 2 OF 4
Dimensions:
Adapter mounting
•Remove 2 screws from the PS10 and use the 2 screws
and the 2 washers provided to fix the adapter.
•Please, do not push on the 2 screws while screwing
them, to avoid disengaging the bolt that is inside the
cabinet.
•WARNING: Screws must be secured using Loctite 243TM
Mounting position
All manuals and user guides at all-guides.com
- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
PAGE 3 OF 4
Adapter / Arm mounting
For the wall mount of VNI-WS10, please select screws and mounting location supporting 4 times the system
weight.
Tighten well to cancel any float between the arm and the adapter.
All manuals and user guides at all-guides.com
- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
PAGE 4 OF 4
Safety device
Use the parts provided
•NEXO cannot accept responsibility for accidents caused by any factor other than defects in this product itself.
•Please check the web site nexo-sa.com for the latest update.
All manuals and user guides at all-guides.com
Tabla de contenidos
Otros manuales de Rack y soporte de Nexo
Nexo
Nexo GPT-SSBRK Manual de usuario
Nexo
Nexo PNI-P15TO2L18 Manual de usuario
Nexo
Nexo MSUB12-I Manual de usuario
Nexo
Nexo LNI-3L15 Manual de usuario
Nexo
Nexo N200 Manual de usuario
Nexo
Nexo IDT-POLE32x1400 Manual de usuario
Nexo
Nexo P15 Manual de usuario
Nexo
Nexo GEO M10 Manual de usuario
Nexo
Nexo VNI-WB02 Manual de usuario
Nexo
Nexo P18 Manual de usuario
