NEXIS PTZ10UH Manual de usuario
USB HD PTZ Camera
User Manual V1.0
SAFETY NOTES
Before installing the device, please read this manual carefully and follow instructions
indicated to ensure proper operation. Please keep this manual for future reference.
Before powering on the device, please check the input power voltage carefully, the camera
accepts DC5V, otherwise, it may cause damage to the camera.
Please put USB data cable, video and control cables at safe place in order not to cause
malfunction to the device.
Please put the device into use at required working temperature and humidity, working
condition of the device is 0℃~+40℃，humidity at＜90﹪. Please avoid to have unrelated
objects get into the device like corrosive liquid that may cause damage / danger.
Please avoid shock, vibration, soaking may cause to the device when transporting and
installing, otherwise, it may cause damage to the camera.
Please only refer to authorized personnel to repair the device, do not disassemble the
camera by yourself.
Only use USB date cable and control cables, and the cables should be connected separately
in order to ensure proper use. Do not aim the camera lens at sunlight or strong lights that
may cause damage to the imaging system of the device.
Please use soft cloth to clean the device, do not use strong or abrasive detergent to clean
that will damage the device’s housing / lens.
Warnings
1.If you need to extend the power cable, please extend the power cable from the part on
below picture (220V/110V), do not extend from part 1 on below picture (DC12V), otherwise
it will cause unexpected damage to the device.
2.To prevent infringement of the rights of others, please confirm that it is installed and used
within the scope permitted by local law!
CONTENTS
PRODUCT OVERVIEW--------------------------------------------------------- 1
FEATURES -------------------------------------------------------------------------------- 1
PACKING LIST ----------------------------------------------------------------------------- 1
MAIN PARTS AND CONTROL INTERFACES ---------------------------------------------------- 1
REMOTE CONTROL------------------------------------------------------------------------- 3
INSTALLATION ---------------------------------------------------------------- 5
DESKTOP MOUNT INSTALLATION------------------------------------------------------------ 5
WALL MOUNT INSTALLATION --------------------------------------------------------------- 5
CABLE CONNECTING --------------------------------------------------------- 6
AMCAP CAPTURE SOFTWARE ----------------------------------------------- 7
DRIVER INSTALLATION OF USB VIRTUAL SERIAL PORT ------------------- 7
ANNEX 1 TECHNICAL SPECIFICATIONS-------------------------------------- 8
ANNEX 2 SIZE AND DIMENSION ---------------------------------------------- 9
TROUBLESHOOTING-------------------------------------------------------- 10
1
PRODUCT OVERVIEW
Features
Using the newest CMOS sensor, up to
1920x1080P30;
3X/10X optical zoom;
3X: Max FOV: 99.6°;
Support H.264, MJPEG compressed
video output, standard UVC protocol;
Power consumption <5W;
HDMI, USB output;
Advanced 2D/3D noise reduction
algorithm, excellent noise control;
Support USB and remote control to
control the camera;
DC servo motor drive, smooth operation,
accurate positioning;
Base with tripod thread interface for tripod
fixing;
Packing List
When you open the package, please make
sure below items are included. If any items
is missing, please contact your supplier.
PTZ Camera (1)
Power Adapter (1)
Remote Control (1)
USB Cable (1)
Software Disc (1)
2
Main Parts And Control
Interfaces
PTZ Camera
Front View
1 Camera Module
2 Power Indicator
Bottom View
3 USB
4 RS-232
5HDMI
6 Power（DC12V）
7Installation Hole
1/4” inch screw, used to fix the camera
Pin Definition Of Control Port
Pin No
Definition
1
/
2
/
3
RXD
4
GXD
5
/
6
TXD
7
/
8
/
3
Remote Control
1 HOME button
Press HOME button, camera moves to
initial position where both pan and tilt
angle is zero.
2 Camera Selection Button
Used to switch among 4 cameras, press
1-4 number buttons to control cameras
with 1-4 address respectively. For
example, press button 1 to control the
camera with address 1.
3 Focus
Camera does not support this feature.
4 Iris
Press“ ”button to reset brightness
value to default. “ ”button to increase
brightness, “ ”button to decrease
brightness.
5 Menu
Camera does not support this feature.
6 Data
Camera does not support this feature.
7 Number Keys
Used to input numbers, for example,
preset number.
8 Cancel
Used to delete number inputted.
9 Power
After the camera has been connected to
power source, press this button to turn on
/ off the camera.
10 Reserved Buttons（F1, F2, F3, F4）
These buttons are reserved for future use.
11 Pattern
Camera does not support this feature.
12 BLC
Used to open / close back light
compensation.
4
13 Zoom
Used to adjust zooming times.
“ ”button to zoom in
“ ”button to zoom out.
14 Back
Camera does not support this feature.
15 OK
Press this button to switch among pan / tilt
control speeds.
16 Direction Operation
Press these four buttons to pan left/right
and tilt up/down.
17 Preset Setting
“ ” button to call a preset.
Input number key(s), and then press this
button to call a preset.
“ ”button to set a preset.
Move the camera to a specific position,
adjust focus value and etc., and then
press this button to set a preset.
“ ”button to clear a preset.
Input number key(s), and then press this
button to clear a preset.
18 Enter
After inputting numbers, press this button
to confirm.
Tabla de contenidos
