Nex-tech QC3857 Manual de usuario
1080p Wi-Fi IP Camera
with LED Spotlights
QC3857
User Manual
1. Product Description
1.1Packing List
1.2 Product Outlook
Camera User manual
Power adapter
Lens
WiFi antenna
LED indicator light
Beforeusing the product, please read this guide
carefullyto avoid any damages to the product.
User Manual
Outdoor Dual Light
IP Camera
-2-
3. Installation
3.1 App Installation
For iPhone users:
Search and download the APP “Nextech SmartCam” in
Apple Store, install it onto your iPhone and register your account.
For Android phone users:
Search and download the APP “Nextech SmartCam” in
Google Play, install it onto your Android phone and
register your account.
2. Before you begin:
● Make sure you know the SSID(WiFi network name) and
password of the 2.4GHz WPA/WPA2 WiFi network that you want
your camera to connetct to. Your network cannot be hidden.
● Make sure that your cameras are within range of your WiFi
network, and the upload speed is more than 1Mbps.
● Try to avoid WiFi signal interference from concrete, cement,
and metal as much as possible. Do not place cameras in a
location where these materials stand between your cameras and
your WiFi router.
● If you have a lot of obstacles between your camera and the
WiFi router, the transmission range will be greatly reduced.
In order to increase the range, you may purchase a WiFi range
extender to place near the camerans.
-3-
3.2 Device Hardware Installation
LED indicator light status
Note: The LED indicator light can be turned off in the
Setting of the app if required.
Connect power supply with the camera, then wait for the
indicator light to flash blue.
Blue
Camera works properly
System starting up
Blue flashing fast
Blue
Pairing mode
Connecting to WiFi
Blue flashing slow
After opening the app for the first time, register your
account by clicking ‘sign up’.
1. Register by email
a. Enter the email address correctly
b. Click "Send code", your email will receive a verification
code, enter the code within 30 minutes [Pls check if the
email (subject: Email verification code) was delivered into
your spam folder].
Input the password twice, click "Finish".Your login
information will be saved the next time you open the
app; however, it is recommended that you write your
login information down.
3.3 User Account Registration
-4-
Click Add Camera button, click on ‘connecting my camera’
Step 1: Check to see if the front LED light is flashing: After
powering on the camera, the LED light should be flashing
blue, click on ‘Next’ and proceed to Step 2.
Step 2: Connect to your wifi network(802.11 b/g/n 2.4GHz):
a. Find your wireless network in the first field. You can
select ‘Other’ if you do not see your wireless network.
b. Enter your Wi-Fi password. If your wireless network does
not have a password, click on the ‘No Wi-Fi password’ box.
Then click ‘Next’, select your timezone.
c. Follow the instructions on the screen and move your phone
speaker close to the camera’s microphone. Before doing so,
make sure you are in a quiet environment without any noise
interference and make sure your phone is not on silent. Then
click ‘send sound wave’.
3.4 Camera Device and Phone Synchronization
-5-
d. You will hear a scrambled sound being played from your
phone. Keep your phone still and wait for the duration of the
transmission, before you move your phone away. Afterwards,
the voice prompt will indicate that the binding was successful
and the app will redirect to the camera view interface
automatically.
e. If you do not hear the voice prompt say, ‘binding
successful’, you can try again by clicking the ‘Send sound
wave’.
4. App functions
4.1 Live video
After syncing successfully, click the IP Camera interface to view
live video. Smooth, SD and HD video definition are available.
Jawa
4.2 Video Recording
4.2.1 Users can record video on live video interface , by pressing
the red video recording icon on the left, refer to photo below.
The recorded video will be stored in the album on the
homepage of app.
-6-
4.2.2 Playback: Click “Playback” icon and choose the time to
replay the video recorded in the MicroSD card.
Select the date and time you wish to playback. You can fast
forward/backward by swiping on the time bar. Tap on the
camera icon to take a screen shot while replaying the video.
Refer to photo below.
4.3 SNAPSHOT SHARING
Our camera provides a function that shares any snapshot
photos to Email/SMS, etc. To access snapshots, please follow
same directions as accessing your video recording explained
under playback feature, choose the photo you want to share
and the platform you want to share it from as indicated in Figure 1.
Jawa
-7-
NEXTECH
NEXTECH
4.4 SUB-ACCOUNT MANAGEMENT
Sub-Accounts gives you the option to allow for multiple users live
access to the same camera. Each camera can support up to 15 live
viewer accounts (including the Administrator account). The
administrator can add and delete sub-accounts by using
Sub-Account Management function. Refer Figures 2, 3 & 4
below.
New sub-accounts can be setup by clicking on the “Add” button.
Note: Please follow the same procedure under user account
registration in page 2 to register and verify the email address
you are willing to add as a sub-account prior to adding it as new
sub-account.
Figure 2 Figure 3 Figure 4
-8-
4.5 VIDEO LOCK
This function allows the user to watch live video and replay
videos only after a password has been setup.
1) To set up, click on the ‘Setting’ button in the IP camera
page as indicated in Figure 5 & 6 below.
2) In the Setting screen, tap on the ‘Video Lock’ button
[defaulted to ‘Not Set’] as indicated in Figure 7 below.
3) Draw an pattern to creat video lock.
Jawa
Jawa
Figure 5 Figure 6
Figure 7 Figure 8
-9-
NEXTECH
NEXTECH
4.6 TWO WAY AUDIO
When you are viewing camera, you can press the “Microphone
Icon” as indicated in Figure 8 above and talk or if the volume on
the phone is up the voice from the camera could be heard in
the phone.
4.7 INFRARED ALARM
The camera uses infrared sensors when someone/something
appears within its detection area. The alarm on camera will
ring for 5 seconds, and at the same time, the phone will also ring
and receive an alarm notification. Set the alert notification
message to access the live video feed.
You can adjust the timing of the alarm and enable/disable the
alarm sound under the camera setting.
NIGHT VISION
There are two night vision mode: infrared night vision and white
lamp night vision. Infrared night vision is on automatically when
it is getting dark enough. White lamp can be turned on by
“lamp”-”settings” on the APP, as per the diagram below:
Besides switching the white lamp on, users can also set the time
frame for the white lamp.
10
Tabla de contenidos
Otros manuales de Cámara de seguridad de Nex-tech
