Thank you for purchasing this product. Please read all the safety and operations instructions carefully before using
the product. Keep this manual for future reference. This product can create perfect laser programs and effects since
it has passed a series of strictly tests before delivery. Please check the attachments listed on this page after opening
the carton. If carton damaged or attachment missed in transit, please contact your dealer or our after sales service
department.
Package list:
When you unpack the case, please take time to examine the items as follows:
········RGB animation laser projector 1 pcs
········Power cord 1 pcs
········User manual 1 pcs
Notice:
1. Avoid direct eye exposure to laser beam. Never intentionally expose your eye or others to direct laser beam. It can
potentially cause instant eye injury or blindness if laser beam striking directly to eyes.
2. Don’t point onto any oncoming pedestrians, vehicles or traffic routes from land, sea or air.
3. Don’t project at or within the flight path of aircraft. If your intended surface is within 10 nautical miles of airport,
lower the angle of light so that no lasers pointing into the sky.
4. Don’t turn on and off the unit frequently.
5. Before using this unit makes sure the power supply is ground.
6. Use cleaning tissue to remove the dust absorbed on the external lenses periodically to optimize light output.
7. Don’t set the scanner speed beyond the the real scanner speed of the fixtures while control the laser via any
software.
8. Only the qualified person can do the electrical installation and repair job in accordance with all applicable codes
and standards.
Technical Parameters:
Power supply: AC90-240V,50-60Hz±10%
Rated power: max 100W
Laser power: RGB300-2000mw
Laser modulated signal: analog or TTL modulation
Type of laser: imported semiconductor solid-state laser
Beam diameter at the aperture :<6mm
Beam divergence:<1.3mrad
Laser wavelength: red 638±5nm, green 520±5nm, blue 450±5nm
Scanning system: 15-20KPPS high speed scanning
Control mode: DMX512 signal control /self-walk/voice control/master-slave
Working environment: indoor (-30~40 degrees)
Packing : carton case
